Electrical Maintenance
Resume:
Jess Diwayan Ulep
Aurora Colorado, U.S.A. 80013
Email Add: *********@*****.***
Cell Phone No. +1-720-***-****
WORK EXPERIENCES:
Agency : EUROASIA PHIL. INC. (EPI)
Company : AMBATOVY NICKEL AND COBALT REFINERY (Dynatec Madagascar S.A.)
Project : Operation and Maintenance of Ambatovy Ammonia Plant, Port Area, Off Site Area, Tailing Pond
Project Site : Toamasina, Madagascar
Inclusive Date : June 02, 2014 to July 18, 2016 (2 years)
Position : Electrical Maintenance Technician
Job Duties :
- Responsible for performing routine and complex maintenance tasks of the system and area
- Assure undelay operation of Port Hooper’s and surge bin including its conveyors and hydraulic
And pneumatic system, fire pump station, sump pumps and dust suppression system of port material handling
Ship unloading system and ammonia unloading arm system
- Maintaining 6 X 1200 kilowatts Cummins and caterpillar Diesel Generator with PCC 3201, EMCP 3.2, 3.1
And DMC 3000 control system
- Maintain operation of raw water pump, De-mineralized Water Treatment Plant Sump Pumping
Station and Fire Fighting Pumping Station
- Compressed Air System for operation of dust suppression system and pneumatic control valves
- Potable and Sewerage Water Treatment Plant
- Assist the supervisor for planning new pump back project in 10 different area powered by individual generator
Installing tailing pond area 3 X 325 kilowatts motors and installation 6.6Kv transformer and tesys control panel
- Installation of grounding protection and cathodic protection panel
- Trouble shooting and repair of control panel and electrical motor and equipment
-Maintain electrical drawings, files and maintenance records of all electrical equipment of the plant
-Develop preventive maintenance programs of all electrical equipment
-Assist in training shift personnel in preventive maintenance and operating procedures
-Review engineering specifications and drawings
- Investigate equipment failure and difficulties, diagnose faulty operation and make report, recommendation and work request
-Evaluate electrical systems data to determine maintenance schedules and eliminate down time to ensure continuous operation of the plant
-Be familiar with, and adhere to, all site HSE regulations
Agency : KEPCO PLANT SERVICES AND ENGINEERING (KPS)
Company : AMBATOVY POWER PLANT power generation (Dyna tech Madagascar S.A.)
Project : Installation, operation and maintenance of diesel power generation
Project Site : Toamasina, Madagascar S.A
Inclusive Date : January 19 2012 to January 19 2014 (2 years)
Position : Electrical TEAM LEAD /Pre-Comm. Of 39 X 1.2 MW Cummins Generator
Job Duties :
- Installation of cable trays, conduit and supports, lighting system, grounding system, in- plant paging system and other electrical equipment.
- Installation of under-ground and over-head cable pulling activity, glanding, testing and termination for various electrical equipment.
- Installation of generator units, power transformers, substation, ups system and MCC rooms on site and off site for supply power generation
- Pre commissioning of generator and transformer performance while it was tie parallel with turbine generator
- training local personnel of proper operation, maintenance procedure and proper handling of diesel generator
- Perform routine inspection for punch list issue that to be rectify
- Conduct Pre-inspection of the completed works before initiating request for inspection (RFI)
To assure that all works conforms with the Standard.
- Responsible for the documentation of the daily progress report and schedule for the electrical
Maintenance activities.
- Trouble shooting, repair, and maintenance of all electrical equipment, control panel and motors
On site and off site area (tailing pond and raw water pump station)
- Conduct cable continuity test, cable insulation test and fill check sheet, earthing test,
Motor solo run test.
- Responsible for the commissioning, testing and operation (start-up and shutdown, loading
And unloading of megawatts load depend to the load demand request by the SBO
- Assist electrical and instrumentation engineer in loop checking, simulation, testing
And commissioning of electrical and instrument controlling devices.
- Work closely with client site personnel and vendor service engineers engaged in
Pre-commissioning activities. Review engineering drawing and specifications to ensure
Adequate provisions have been made for testing, flushing, cleaning and other Pre-commissioning
Of mechanical and electrical systems in the plant.
- Perform other duties assigned from time to time by my superior mostly on call and emergency
Trouble shooting work
- Testing and trouble shooting of HV and LV MCC’s and Switchgears and Power Transformers.
- Locate electrical problems, diagnose and determine sequence of operation for repair by use
Of schematic drawing and proper test equipment.
- Pre-commissioning and commissioning of electrical equipment, MCC Panel, pneumatic and
Hydraulic control panel and motors.
Agency : TOTAL ENGINEERING SOLUTION (TES)
Company : AGGREKO POWER GENERATION (rental)
Project : 10 Megawatts (temporary back up power generation)
Project Site : Meulaboh, Indonesia
Inclusive Date : June 10 2010 to September 30 2011 (1year & 3months)
Position : Electrical Maintenance Technician
Job Duties :
- To perform minor and major repairs, and maintenance of equipment as per
Manufacturer’s specs and safety regulations/standards.
- To continuously monitor the operation and adjust the load output of the generator
Depend to the power company Load demand
- On call duty to secure safety of plant by monitoring the operation when the weather
was bad, black start the plant at the time of tripping and reset all generator and transformer
- Lead the team for the direct control, monitoring and operation of 10 X 1.2 MW
Cummins generator, and 20 KV transformer
- Gather power generation data every hour to be submitted daily to main office
- To plan work and solve daily problems to reduce down time of generator, transformer
Fuel pump and other equipment.
- To issue and follow up material requisitions, for equipment maintenance, as per operation need
- To perform generator Change oil, fuel service, transformer A and B service
- To continuously review and revise the maintenance schedule for all equipment.
- Coordinate operation and maintenance activities to achieves safe, reliable and efficient plant
Start up and shut down operation
- To follow-up with site engineer and personnel concerning the status of equipment including
Breakdown or any complaints from the site.
Company : SBG – PCM PETROCHEMICAL AND MINNING DIVISION
Project Site : AL JUBAIL, SAUDI ARABIA
Inclusive Date : March 18 2006 to April 07 2010 (4 years)
Position : Electrical Technician / crusher plant operation coordinator
Job Duties :
- Supervise installation of power generator, crusher plant machineries and equipment, motors and
Conveyors, screening equipment, camp site facility electrical system
- Installation of under-ground and over-head cable pulling activity, glanding, testing and
Termination of various electrical equipment’s, transformer, and MCC control panel.
- Responsible for the documentation of the daily progress report, trouble report and schedule of
work of the Electrical installation activities.
- Trouble shooting, repair and maintenance of generator, motors, and electrical panel and equipment,
Including work shop facility and camp site electrical trouble
- Testing and trouble shooting of LV /HV MCC’s and Switchgears and Power Transformers.
- Locate electrical problems, diagnose and determine sequence of operation for repair by use
Of schematic drawing and proper test equipment.
- Perform equipment test run against guaranteed performance data: monitor, optimized and
Analyze equipment running condition
- Execute work on minor or major plant shut down work request activity at refinery plant
- Assist other contractor engineers and personnel to finish shut down work at time without delay
- Pre-commissioning and commissioning of electrical equipment, MCC Panel, Transformer
And motors.
Company : CATHAY PACIFIC STEEL CORPORATION (CAPASCO)
Project : SMELTING SHOP DIVISION
Project site : Felix ave. cainta Rizal
Inclusive Date : December 4 1995 to august 31 2004 (9 years)
Position : Electrical maintenance Technician
Job Duties :
- Installation of 2 substation (25KV), power capacitor, reactor and transformer for
2 X 45 tonner electrical arc furnace
- assemble and wirings control panel, PLC, GCB, VCB and other electrical equipment AC/DC
Supply power of 2 furnace
- Cable laying and termination of cooling tower, transformer, raw water pump station, compressor,
Hydraulic and pneumatic pump
- Cable, motors and controller termination of 5 X 60 tonner overhead crane
- installation of control panel for ladle pre heater and transfer car station
- responsible for trouble shooting and testing of motors and all electrical equipment at
Electrical work shop
- Dismantle and assemble, testing of AC/DC motors 5 kW up to 500 kW motor,
Control panel of power magnet for crane, MCC panel assemble and repair
- Executing Preventive maintenance and shutdown work with proper coordination with the
Operation personnel
- To continuously review and revise compormity of spare material and equipment.
- Coordinate operation and maintenance activities to achieves safe, reliable and efficient plant
Start up and shut down operation
- To issue and follow up material requisitions, for equipment maintenance, as
per manufacturers specification
- To follow-up with site engineer and personnel concerning the status of equipment
Including Breakdown or any delays of the operation
EDUCATIONAL BACK GROUND:
DUAL TECH. TRAINING CENTER : Industrial motor control wiring and maintenance - 1991
PASIG MANPOWER TRAINING CENTER : Refrigeration and air-conditioning - 1988
: Auto electricity and mechanic (diesel/gas) - 1984
: Bldg. electrical with appliances servicing - 1983
SUMULONG MEMORIAL HIGH SCHOOL : Secondary education - 1981
JUAN SUMULONG ELEMENTARY SCHOOL: Primary education - 1977
SEMINAR ATTENDED:
Basic Variable Frequency Drive control system (AMBATOVY, Madagascar)
Electrical Low and Medium Voltage accreditation (AMBATOVY, Madagascar)
Safe Work Permit user, acceptor and coordinator (AMBATOVY, Madagascar)
PERSONAL INFORMATION:
Birth date: September 18 1965
Birth place: Quezon City, Philippines
Nationality: Pilipino
Religion: Catholic
Civil status: Married
Height: 5’5 inch.
Weight: 65 kgs
JESS DIWAYAN ULEP
Passport no. EB9607073
Contact this candidate