Process Engineer
Resume:
CURRICULUM VITAE
Oleg Sabitov
PERSONAL INFORMATION
Address: Madrid, Spain
Mob. phone: +34-618-***-***
E-mail: *****@******.**
EDUCATION
****-**** ****-******** ******* at Ufa State Petroleum Technological University, Russia. “Chemical Cybernetics” majoring in processes and devices of chemical production, oil and gas treating and refining.
1999-2004 Ufa State Petroleum Technological University, Russia, Technological Faculty, “Basic Processes of Chemical Production and Chemical Cybernetics” majoring in mathematical modeling of chemical, oil and gas technological processes. Diploma equal to Master Degree.
PROFESSIONAL SKILLS
Qualified in Russian Normative Documents.
Certified in “Building safety and quality of oil-gas field surface facilities, well ties”.
PC Software: MS Office; MathCAD; HYSYS; FlareNET; PRO/II; ProMax; GIBBS; Borland, Delphi, Basic programming languages; AutoCAD; Plant 4D; TDMS.
FOREIGN LANGUAGES
Russian – Native language
English – Advanced level
Spanish – Intermediate level
SUMMARY
Chemical, Process, Mechanical Engineer with over than 13 years experience in LSTK upstream, downstream engineering, including EPC detailed engineering, FEED stage projects, Conceptual, Feasibility studies, Basic design, Brownfield, Greenfield projects.
Process and Mechanical engineering design of the Oil, Gas and Water Treatment Plants in Vendor companies.
Process and Mechanical engineering design work in Russian Design Institute including elaborating of Design Documentation according to RF 87.
Scientific experience in Ufa State Petroleum Technological University, Russia, Technological Faculty as Professor in mathematical modeling and numeric methods applying for chemical processes. Several scientific publications were made in the sphere of information technology application for mathematical modeling and hydrocarbon mixtures phase equilibrium calculations, gas processing and treating.
CORE COMPETENCIES
oAssist to Lead / Senior Process / Mechanical Engineer in Conceptual, Feasibility studies / Basic design and providing technical support during detailed design phase of the projects for any project related to process plants
oAspenTech HYSYS, PRO/II, GIBBS, ProMax (Simulation)
oPipeline and compressor station design/simulation
oHeat & Material Balance (H&MB)
oGeneration/development of the BFD, PFD, UFD, DPDT and P&ID
oFinalizing system design parameters / carry out necessary calculations
oSpecifying static, rotating equipment / systems such as heat exchangers, vessels, pumps, reactors, etc. also as per Russian standards, API standards, SHELL DEP’s, Aramco standards, other international design codes and standards
oProcess equipment data sheets
oProcess Description and Process & Control Philosophies
oFlare network design/simulation
oHydraulic Calculations
oPSV and Control Valves sizing
oCause & Effect diagrams, Safe Charts
oLine list, Equipment list, Tie-in list, Utility consumption list
oWrite Design Philosophies, Operating, Commissioning, Start-Up Guidelines / Manuals
oSafety reviews like HAZOP, SIL etc.
oPreparing, reviewing, responding to technical queries of Vendors, 3rd party contractors, main engineering contractors
oPromoting technological innovations that can be economically exploited to improve safety, performance
oImplementation of industry best practices and systems, processes and standards
oInterfacing with Managers, Team Leaders and Engineers in Company's Technical Departments, Business Units, Operations Units, and Logistics Department. Interface regularly with Contractors engineering and Project Management Team and Team Leaders as and when required.
PROFESSIONAL EXPERIENCE
11/2011 – 05/2016: TECNICAS REUNIDAS, Madrid, Spain
My work status:
Process Department / Process Engineer
PROJECTS completed with descriptions:
EPCC STAGE DEVELOPING FOR PROCESSING & PRODUCTION FACILITIES Project, ADRAR, TOUATGAZ Groupement, Algeria, including:
Installation of well pads, flow lines, manifolds and related gathering network
Laying of related trunk lines
Construction of a Central Processing Facility (CPF) and related infrastructure
Laying of the gas export pipeline from CPF to PE (mentioned hereafter as “Export Pipeline”)
Installation of additional inlet facilities within existing CPF
Installation of an LP compression unit within existing CPF
VGO DEEP CONVERSION COMPLEX Project, EPC Detailed Stage development, LUKOIL, Volgograd, Russia, including:
Hydrocracking (Unicracking) Unit licensed by UOP
Hydrogen Unit licensed by Haldor TOPSOE
Luboil Unit licensed by Exxon Mobil
SRU and TGTU Units licensed by Fluor
Sour Water Unit
Amine Regeneration Unit
Gas Train at Mina Al-Ahmadi Refinery EPC detailed stage development, Al-Ahmadi, Kuwait
Kuwait National Petroleum Company’s a new 5th Gas Train (GT 5) at Mina Al-Ahmadi Refinery to process future gas production in Kuwait. This Gas Train will supplement the gas processing capability provided by the planned Gas Train 4, which will have a capacity of 805 MMSCFD gas and 106 MBPD of liquids and the existing Gas Trains 1, 2 and 3, which each have a processing capacity of 505 MMSCFD of gas and 40 MBPD of liquid.
The design of the NGL section is based on the GSP (Gas Sub-cooled Process), which is a Turbo Expander, based cryogenic technology. The GSP was selected among 4 candidate processes, which are two open-art and two licensed processes, i.e. GSP (Open Art), OHR (Over Head Recycle, Open Art), SFR (Split Flow Reflux, Licensed by Ortloff), and the CRR (Cold Residue Recycle, Licensed by Ortloff).
This plant capacity is designed to process 805 MMSCFD of Feed Gas and 106.3 MBPD of external Condensate in addition to the Condensate produced in the NGL Recovery Section of the process. Product Recoveries of at least 75% C2, 97% C3 and 99% C4 are expected.
The Plant facilities are provided as follows:
Feed Pretreatment Unit
NGL Recovery Unit
NGL Fractionation Unit
Product Treating Unit
Propane Refrigeration & Deep Refrigeration System
Sour Water Stripping Unit
Utilities (Fuel Gas System, Waste Heat Recovery Steam Generation System, Sea Water System, Closed Cooling Water System, Nitrogen Generation System, Instrument and Plant Air Systems, Water Treatment and Distribution Systems, Pressure Relief and Flare, Liquid Disposal Systems, Fire Fighting System, and Effluent Treating, etc.)
TINRHERT FIELDS DEVELOPMENT FEED stage, SONATRACH, Algeria
Development of the TINRHERT fields with its own resources in South-Eastern Algeria within the Wilaya of Illizi, including:
Gathering network for the North and South fields
Surface installations at the wellhead for the gas wells to be connected in the short and medium term phases
New facilities beside of CPF
Gathering network and the electrical multiphase pumps stations needed for the Oil ring wells to the existing HP Inlet Separator train at CPF
New compression unit at CPF (3 x 50%) to handle the gas from new oil ring production only
Gas export line from new compression unit at CPF
DESIGN DOCUMENTS FOR VACUUM RESIDUE HYDROCRACKING FACILITY, LUKOIL-Nizhegorodnefteorgsintez LLC, Nizhny-Novgorod, Russia
LUKOIL-Nizhegorodnefteorgsintez LLC Refinery processes 17 million tons per year of West Siberian and other crude oil blends. The refinery is located in Kstovo, Nizhny Novgorod region, Russia.
The Deep Conversion Complex composed of several process units and relevant utilities in order to upgrade vacuum residue into final or intermediate distillate products.
Vacuum Residue Hydrocracking Unit (H-Oil) licensed by Axens
Diesel Hydrotreating Unit (PRIME-D) licensed by Axens
Naphtha Hydrotreating Unit licensed by Axens
Gas Plant Unit licensed by Axens
Sulphur Production Unit licensed by Siirtec-Nigi
Hydrogen Production Unit licensed by Technip
THE SALESKI PHASE 1 Project, LARICINA, Alberta, Canada
The Saleski Phase 1 Project produces up to a design rate of 10700 BOPD of Bitumen, based on a Cyclic Steam
Assisted Gravity Drainage (C-SAGD) technology.
The Project consist of a new Central Process Facility, Well pads, flow lines, as well as associated infrastructure
designed to include the following units:
General/Common/Pipe racks
Production Treating
De-oiling
Water Treatment
Steam Generation Services
Utilities
Dilbit & Diluent Storage
Diluent/Solvent System
VRU Compression
CPF-Well Pad Flow Lines
Production Well Pad
VGO DEEP CONVERSION COMPLEX Project FEED stage, LUKOIL, Volgograd, Russia
Hydrocracking (Unicracking) Unit licensed by UOP
Hydrogen Unit licensed by Haldor TOPSOE
Luboil Unit licensed by Exxon Mobil
SRU and TGTU Units licensed by Fluor
Sour Water Unit
Amine Regeneration Unit
07/2010 – 10/2011: LLC “OZNA-Engineering”, Ufa, Russia
My work status:
Concurrent Engineering Business-unit / Process, Equipment and Vessel Design Department / Leading process engineer
My activities:
- Finding, elaboration and selection for oil, gas and water treatment and refining plants optimum and cutting edge technology on basis of customer technical requirements.
- Survey of existing oil production facilities with presentation of engineering recommendations.
- Process simulation and calculations using MathCAD, Aspen HYSYS, PRO/II and GIBBS.
- Elaboration of vessels (separators, settlers) construction and assembly.
- Elaboration of draft proposal and technical design assignments for Construction, Automation and Electric Departments of the Company.
- PFD, data sheets and equipment elaboration of oil, gas and water treatment and refining plants.
- Reviewing and revision of the existing (working) project documentation according to Russian Normative Documents and customer technical requirements.
- Control for the full object designing work with Design and Research Institute.
- Negotiations, executive retreats and agreement all design decisions with contract customer.
- Control and supervising for manufacturing of equipment.
- Supervising and commissioning of oil, gas and water treatment and refining plants.
07/2008 – 06/2010: JSC “NIZHNEVARTOVSKNIPINEFT” RDI, Nizhnevartovsk, Russia
My work status:
Process Design Department / 1st category engineer
My activities:
- Finding, elaboration and selection for oil, gas and water treatment and refining plants optimum and cutting edge technology on basis of customer technical requirements.
- Survey of existing oil production facilities with presentation of engineering recommendations.
- Process simulation and calculations using MathCAD, Aspen HYSYS.
- PFD, data sheets, explanatory notes and equipment elaboration of oil, gas and water treatment and refining plants.
- 2D and 3D modeling of Process Equipment Piping.
- Elaboration of draft proposal and technical design assignments for residual sides of the Project.
- Elaboration of design documentation, books, packages for Process Side of the Project according to Russian Normative Documents and customer technical requirements.
- Negotiations, executive retreats and agreement all design decisions with customer of the Project.
01/2008-07/2008: CJSC STC “ModulNefteGasComplect”, Ufa, Russia
My work status:
Department for field gas treatment and refining / Leading process engineer
My activities:
- Finding, elaboration and selection for flare systems, gas treatment and refining plants optimum and cutting edge technology on basis of customer technical requirements.
- Survey of existing oil production facilities with presentation of engineering recommendations.
- Process simulation and calculations using MathCAD, Aspen HYSYS.
- Elaboration of draft proposal and technical design assignments for Construction, Automation and Electric Departments of the Company.
- PFD, data sheets and equipment elaboration of flare systems, gas treatment and refining plants.
- Reviewing and revision of the existing (working) project documentation according to Russian Normative Documents and customer technical requirements.
- Control for the full object designing work with Design and Research Institute.
- Negotiations, executive retreats and agreement all design decisions with contract customer.
- Control and supervising for manufacturing of equipment.
- Supervising and commissioning of flare systems, gas treatment and refining plants.
12/2006-12/2007: CJSC STC “ModulNefteGasComplect”, Ufa, Russia
My work status:
Department for new methods and technology / 2nd category process engineer
My activities:
- Finding, elaboration and selection for flare systems, oil and water treatment plants optimum and cutting edge technology on basis of customer technical requirements.
- Survey of existing oil production facilities with presentation of engineering recommendations.
- Process simulation and calculations using MathCAD, Borland.
- Elaboration of draft proposal and technical design assignments for Construction, Automation and Electric Departments of the Company.
- PFD, data sheets and equipment elaboration of flare systems, oil and water treatment plants.
09/2005-08/2006: Ufa State Petroleum Technological University, Ufa, Russia
My work status:
Chair of Chemical Cybernetics / Professor
My activities:
- Development of Laboratory works and Lections for subjects: Information Technology (MS Office, mathematical analysis applying Borland) and application of new methods in chemical processes calculations (HYSYS).
- Teaching during the course of laboratory works for above mentioned subjects.
- Lecturing for above mentioned subjects.
- Execution of science and research work in the sphere of information technology application for mathematical modeling and hydrocarbon mixtures phase equilibrium calculations, gas processing and treating.
Contact this candidate