Lifting Engineer

Aamir Shahzad

Lifting Inspection Engineer (LEEA Certified)

Cell: +968********

E-mail: **************@*****.***

More than 6 Year experience in lifting inspection

LEEA Part VII Offshore Container Diploma (Nov 2016)

LEEA Part III Lifting Machine Manual Diploma ( August 2014)

Waiting for the result of LEEA Part VI Overhead Travelling Crane.

LEEA Part II Lifting Equipment General Diploma (May 22nd 2013)

LEEA Part 1 Certification. (April 19, 2012).

Bachelor in Metallurgy & Materials Engineering (BE) from Dawood College of Engineering & Technology, Karachi with 76%.

Corresponding Course “Lifting Gear General” from Lifting Equipment Engineers Association.

CROSBY CEN/ASME, RIGGING TRAINER DEVELOPMENT COURSE.

DPT Level II from American Society of Non-Destructive Testing (ASNT).

MPI Level II from American Society of Non-Destructive Testing (ASNT).

Passed Level-II CIEH Health & Safety at Work Place from Chartered Institute of Environmental Health, UK

Rigging and slinging training course from Crosby

Passed Gas Testing course conducted by PDO Oman

Passed H2S course conducted by PDO Oman

Passed coaching and monitoring skills course conducted by PDO Oman

Passed safety leadership and management course conducted by PDO Oman

Passed HSE induction course conducted by PDO Oman

Passed IFR course conducted by PDO Oman

Passed First aid course conducted by PDO Oman

Passed fire fighting course conducted by PDO Oman

Passed Rigging and Slinging Course from PDO Oman

CAREER OBJECTIVE:

To work in a stimulating and challenging surrounding that would facilitate the maximum utilization and application of my skills and expertise in making a positive difference to the organization.

SYNOPSIS:

Meticulous and highly accomplished professional with more than Five year of experience as Inspection and lifting Engineer. Extended expertise in MS Office, Processing sound knowledge about testing of Mobile Cranes, STS Cranes, RTG, Fork Lift Trucks, Lifting trolleys & Lifting tools and gears, lifting & rigging operation supervision etc, Adroit at analyzing the organization requirements; Tendency to thrive in dynamic environments while remaining pragmatic and focused; highly ethical, trustworthy and discreet.

Quick at learning new concepts, working well under pressure and communicating ideas clearly and effectively.

Dedicated and highly ambitious to achieve personal goals as well as the organizational goals.

Ability to build new territories and expand opportunities towards the achievement of stated targets.

Excellent decision making skills with a positive approach.

PROFESSIONAL EXPERIENCE:

1.Petroleum Development Oman

Position: Lifting Engineer

Duration: October 2014 to till date

a.As Rigging Engineer ( lifting Specialist)

Responsibilities:

• Review and Approval of Non-Routine Complicated/Critical Lifting Plans

• Review and approval of Mfg. documents for procurement of new lifting gears

• Review and approval of Mfg. documents for procurement of new lifting appliances

• To give guideline to custodian for the safer storage and handling of lifting equipments

• Perform condition check (spot check)

• Responsibility for ensuring that all lifting gears used are color coded

• Responsibility for centralized lifting equipment certification control

• Supervision of heavy, Complicated and Critical lift

• Review of rig move plans

• Responsible for in-house inspection of lifting points (pad eyes) prior to lift.

Review, approved for lifting related risk assessments with reference to LOLER, PUWER, regulations and procedures and PDO procedure.

Responsible for review and implementation of lifting procedures.

b.Lifting inspection Engineer

Responsibilities:

Inspection of all PDO owned Lifting Equipments such as EOT cranes, Jib Cranes,

Monorails, Trolleys, Chain Blocks / Lever Hoists, Fork Lifts and Scissor Lifts etc.

• To give guideline to custodian for the safer storage and handling of lifting equipments.

• Perform condition check (spot check) for lifting Equipments.

• Responsibility for Ensuring that all lifting gears used is colour coded.

• Responsibility for centralized lifting equipment certification control.

Inspection of all PDO owned Hoists and Rigs Lifting Gears such as Wire Rope Slings, Webbing Slings, Shackles, Eye Bolts, Turn Buckles, Lifting Frames, Containers, Drill Pipe Baskets and Beam Clamps etc.

Inspection and Verification of all Preventive Maintenance (PM) activities of Lifting Equipments carried out by Contactors.

• Provide Witness Inspection support to Project Teams in various Lifting Equipments Commissioning accomplished and ongoing Projects in PDO.

• Carried out PDO Lifting and Hoisting Procedures compliance audits of all PDO and Contractors.

• Provided support to many Contractors for Repair/Refurbishment Projects of Lifting Equipments

Responsible to carry out monthly audit to ensure all PDO Workshops and Contractor following the Lifting and Hoisting Procedures.

Visual and through inspection of Wire rope sling, chain sling, shackles, webbing slings, eye bolt, hook, swivel, beam Clamp, plate clamp, lifting cap, master link, connecting link, container hook etc.

Responsibility for centralized lifting equipment certification control

Reviewing the NDT Reports of welds on Lifting pad eyes and structure of the Onshore & Offshore Containers

Through inspection and load test of lifting pad eyes, roller bars of containers and baskets

2.BUREAU VERITAS BAHRAIN

Position: Lifting Inspection Engineer

Duration: April 2014 to till October 2014

Responsibilities:

Write Final Inspection Report after completion of inspection mentioning discrepancies and recommendations.

Inspection of Lifting Equipment, i.e. mobile cranes (hydraulic & mechanical) including truck mounted, wheel mounted, crawler cranes, RTG & STS cranes etc.

Inspection of forklifts & boom trucks.

Inspection of Lifting Gears & Accessories including slings, shackles, lifting beams etc.

Inspection of lifting gears like textile slings, web sling as per BS standards and LEEA ACOP.

Inspection of load chain and chain slings as per BS Standards.

Inspection of Beam clamps as per international BS standards.

Involved in preparing rigging studies and supervised lifting operations according to client lifting procedures.

Review all lifting plans and rigging studies as per defined procedures and crane manufacturer instruction.

Well familiar with LOLER safe crane operation guidelines and LEEA ACOP

3.INSPECTEST INDUSTRIAL SOLUTIONS ABU DHABI

Position: Lifting Inspection Engineer

Duration: September 2013 to April 2014

Responsibilities:

Write Final Inspection Report after completion of inspection mentioning discrepancies and recommendations.

Visual Inspection and thorough examination of Lifting Appliances and Lifting Gears

Inspection of forklifts & boom trucks.

Inspection of Lifting Gears & Accessories including slings, shackles, lifting beams etc.

Inspection of load chain and chain slings as per BS Standards.

Inspection of Beam clamps as per international BS standards.

Involved in preparing rigging studies and supervised lifting operations according to client lifting procedures.

Review all lifting plans and rigging studies as per defined procedures and crane manufacturer instruction.

Well familiar with LOLER safe crane operation guidelines and LEEA ACOP

Capable to interpret all types of mobile crane’s load chart and range diagram irrespective to any manufacturer, model and capacity. Involve in crane inspection especially during attachments assembly & operation.

4. UNITED REGISTRAR OF SYSTEMS (URS) PAKISTAN

Position: Lifting Inspection Engineer

Duration: July 2011 to Sept. 2013

Responsibilities:

Write Final Inspection Report after completion of inspection mentioning discrepancies and recommendations.

Inspection of Lifting Equipment, i.e. mobile cranes (hydraulic & mechanical) including truck mounted, wheel mounted, crawler cranes, RTG & STS cranes etc.

Inspection of forklifts & boom trucks.

Inspection of Lifting Gears & Accessories including slings, shackles, lifting beams etc.

Involved in preparing rigging studies and supervised lifting operations according to client lifting procedures.

Review all lifting plans and rigging studies as per defined procedures and crane manufacturer instruction.

Well familiar with LOLER safe crane operation guidelines and LEEA ACoP.

Capable to interpret all types of mobile crane’s load chart and range diagram irrespective to any manufacturer, model and capacity. Involve in crane inspection especially during attachments assembly & operation.

Witness NDT Tests (RT, PT, MT and UT) and review the results and prepare all inspection reports including VT, UT, MT & DPT.

Witness of Hydro Test.

Verification of punch list after rectification.

Visual inspection of welding.

Detail inspection and report preparation of Earth Moving Equipments (EME).

5.BUREAU VERITAS PAKISTAN

Position: Lifting Inspection Engineer

Duration: Jan 2010 to June 2011

Responsibilities:

Write Final Inspection Report after completion of inspection mentioning discrepancies and recommendations.

Inspection of Lifting Equipment, i.e. mobile cranes (hydraulic & mechanical) including truck mounted, wheel mounted, crawler cranes, RTG & STS cranes etc.

Inspection of forklifts & boom trucks.

Inspection of Lifting Gears & Accessories including slings, shackles, lifting beams etc.

Involved in preparing rigging studies and supervised lifting operations according to client lifting procedures.

Review all lifting plans and rigging studies as per defined procedures and crane manufacturer instruction.

Well familiar with LOLER safe crane operation guidelines and LEEA ACoP.

Capable to interpret all types of mobile crane’s load chart and range diagram irrespective to any manufacturer, model and capacity. Involve in crane inspection especially during attachments assembly & operation.

Witness NDT Tests (RT, PT, MT and UT) and review the results and prepare all inspection reports including VT, UT, MT & DPT.

Witness of Hydro Test.

INTERNATIONAL CODE & STANDAREDS:

I have knowledge about

ASME Sec. V, Sec. VIII, Sec. IX

BS EN 7121,BS EN 13889, BS EN 13414, BS EN 818, BS EN 1492, NSL, LOLER, LEEA & NDT including VT, DPT, MPT, RT.

PERSONAL INFORMATION:

Father Name: Muhammad Miskeen

Date of birth: 5th Feb, 1988

Nationality: Pakistani

CNIC No: 13503-8777262-9

Passport No Ph5142621

Marital Status: Single

Contact this candidate