Name
: Victor C. Espinosa
Desired Position
: Commissioning Operator
Address
: Brgy. Poblacion,Tagoloan, Misamis Oriental
Age
Date of Birth
: June 28, 1980
Status
: Single
Sex
: Male
Nationality
: Filipino
Finished Degree
: Bachelor of Science in Metallurgical Engineering
Total Years of Experience
: 11 years
Contact No.
E-mail/Passport#;
: acyvx9@r.postjobfree.com; EB8867491
WORK EXPERIENCES
A Total of 11 years experienced of Metallurgical/Hydrocarbon industry in manufacturing, processing and construction environments including pre-commissioning/commissioning/ operation phase. Supervise Pre-Operation Verification and Testing (POVT) and Commissioning activities in Pressure Acid Leach Plant, LNG Plant, Smelting Plant (Silicon and Ferronickel productions) and Tank Farm/DEPOT facilities.
COMPANY : JGC PHILIPPINES, INCORPORATED 2109 Prime St. Madrigal Business Park
Ayala Alabang, Muntinlupa City Phils.
A. Job Position : Pre-com/Com Supervisor
B. Project : North Mindanao Import Facility Project
C. Location : Cagayan De Oro City, Misamis Oriental
D. Duration : December 16, 2015 – December 31, 2016
JOB DESCRIPTION:
Supervise Pre-com activities as per Test package for Waterfront/Pipeway/Terminal (Tank Farm) area such Air blowing, Power flushing, Tightness Test, Drying/N2 Purging, Pigging, and Fire Water system service test including (3)Diesel Engine fire pumps, fire hydrants and fire monitors(foam/water) . Assist vendors and operate equipment’s during Metering Skid calibration, Pump Mechanical Run-In (MRI). Implement safety procedure by conducting safety talks prior to conduct pre-com activities and continue coaching safety practice for manpower support.
COMPANY : META NIKEL/KOBALT Ceyhun Atıf Kansu Caddesi 114 Bayraktar Center,
D Blok 3.
Ankara, Turkey
A. Job Position : Process Trainer
B. Project : High Pressure Acid Leach Plant
C. Location : Gordes, Turkey
D. Duration : May 16, 2015- October 25, 2015
JOB DESCRIPTION:
Assist Senior Engineer and Process Engineer for DCS operation during start-up and shutdown in HPAL area. Support Senior Engineer in making technical decision in Shift. Prepare SOP for HPAL area operation. Assist operators in general shift activities and shutdown.
COMPANY : TECHNOSERVE CONSTRUCTION COMPANY Inc.
19th Floor Exportbank Plaza Chino Roces Ave. Corner Sen. Gil Puyat Ave. Makati City Metro Manila
A. Job Position : Commissioning Supervisor
B. Project : Donggi-Senoro LNG Plant
C. Location : North Sulawesi Luwuk City, Indonesia
D. Duration : January 12, 2014 – January 07, 2015
JOB DESCRIPTION:
Supervise Pre-com activities as per Test package for utility/train/off-site area of Air blowing, Power flushing, Tightness Test, Drying/Inerting, Fire Water system testing (fixed & nozzle spray, oscillating and remotely operated spray monitor) Mechanical Run test and new equipment’s as per approved procedures. Prepare necessary documents/attachments for construction and commissioning Work Permit Application. Implement safety procedure by conducting safety talks prior to conduct pre-com activities and continue coaching safety practice for manpower support.
COMPANY : TECHNOSERVE CONSTRUCTION COMPANY Inc.
19th Floor Exportbank Plaza Chino Roces Ave. Corner Sen. Gil Puyat Ave. Makati City Metro Manila
A. Job Position : Pre-commissioning Supervisor
B. Project : Taganito High Pressure Acid Leaching Nickel Refinery
C. Location : Brgy. Taganito, Claver, Surigao del Norte
D. Duration : February 12, 2013 – May 31, 2013
JOB DESCRIPTION:
Supervise/execute Air Blowing, Tightness Test, Steam Blowing, Valve stroking, Power flushing,Pump & Agitators-Mechanical Run-in, and Water Commissioning of two trains Autoclaves, pumps, vessels, thickeners, tanks, and pipelines as per pre-commissioning procedure. Prepare Energization request for scheduled equipment’s for testing. Prepare necessary documents/attachments for Work Permit Application. Implement safety procedure in every pre-commissioning test activities to meet the required safety standards. Initiate Acid Curing of two trains of Flash vessels of Process 1 area as per procedures.
COMPANY : EUROASIA PHILIPPINES INC.
Unit 201, Paragon Plaza Building, #162 EDSA cor.
Reliance Street, Mandaluyong City, Philippines, 1550
A. Job Position : PAL Production Supervisor
B. Project : AMBATOVY NICKEL– Pressure Acid Leach
C. Location : Toamasina, Madagascar
D. Duration : April 21, 2010 – June 8, 2012
JOB DESCRIPTION:
Participate in regular and ad-hoc meetings regarding production, by providing operations feedback and specific expertise. Coordinate Start-ups and Shutdowns with Maintenance Coordinator and Production Superintendent. Manage all personnel issues. Review and ensure SOP, Operation Checklist and Isolation Checklist are utilized by local production crew to enhance operation skills. Coaching and trained Malagasy personnel of new equipment and operation. Participate in and ensure that all Safety and Environment activities are completed as required. Participate in and perform incident investigations and reviews as required by the Company. Implement and enforce company policies, practices and procedures.
COMPANY : CORAL BAY NICKEL CORPORATION
24th Floor, NAC Tower, 32nd Street,
Bonifacio Global City
Taguig City 1634, Philippines
A. Job Position : Junior Production Supervisor
B. Project : High Pressure Acid Leaching Nickel Plant
C. Location : Rio Tuba, Palawan
D. Duration : February 2, 2009 – April 19, 2010
JOB DESCRIPTION:
Supervise and initiate commissioning activities in Line 2 Mixed Sulphide area. Perform field monitoring of running equipment in a timely manner to ensure proper parameter control. Initiate running/stopping equipment’s and closing/opening valves through DCS operation and local fields. Performed and check Pump line-up in the field during pump running and change over.
COMPANY : PLATINUM GROUP METAL CORPORATION
Global Ferronickel Holdings, Inc.
7th Floor, Corporate Business Centre
151 Paseo De Roxas corner Arnaiz Street,
Makati City, 1228, Metro Manila, Philippines
A. Job Position : Process Engineer
B. Project : Ferronickel Smelting Plant
C. Location : Poblacion, Manticao, Misamis Oriental
D. Duration : March 05, 2007 – February 9, 2009
JOB DESCRIPTION:
Evaluate metallurgical operating controls of Calcining operations. Perform a continuous technical evaluation of the plant process. Monitors line operations to maintain high productivity of quality products. Coordinate with production group for proper implementation of parameters. Participate on project teams for the implementation of capital projects.
COMPANY : MINDANAO SILICON METAL CORPORATION
Bo. Gracia PHIVIDEC Industrial Zone, Tagoloan, Misamis Oriental, Philippines
A. Job Position : Line Metallurgist
B. Project : Silicon Smelting Plant
C. Location : Togoloan, Misamis Oriental
D. Duration : July 07, 2003 – March 1, 2007
JOB DESCRIPTION:
Directly supervises the metallurgical operating parameters. Supervise physical and chemical analysis condition of the charge materials at the dosing system. Provide technical support to the production group on metallurgical matters. Anticipates metallurgical abnormalities and coordinates with the production group on remedial measures. Evaluates metallurgical data and recommends changes/improvements whenever necessary. Implement metallurgical operating controls.
SEMINAR & Training:
Permit to Work (PTW) System Training
Location : Ambatovy Training Center and Taganito Training Center
Training/seminars included :
Equipment Preparer on proper isolation of equipment
Permit User
Permit Acceptor
Permit Coordinator
Job risk assessment Job Safety and Environment Analysis(JSEA)
Quantitative Risk Analysis(QRA)
ERT
Confined Space Entry (CSE) training,
Working at heights (WAH)/Fall Arrest
Self-Contained Breathing Apparatus
Gas Testing Seminars
Immediate Response Team (IRT)
Incident Management System training
Incident-Injury Free (IIF) and Supervisors Skill (SSK) training
Educational Background:
Elementary: Camaman-an Elementary School, Cagayan de Oro City Year Graduated: 1993
High School: Misamis Oriental General Comprehensive High School Year Graduated: 1997
College: Mindanao State University- Iligan Institute of Technology Year Graduated: 2003
Course: Bachelor of Science in Metallurgical Engineering
Summary of Skills:
With Engineering degree
Knowledgeable in pressurize processing environment using Distributed Control Systems (DCS), Programmable Logic Controller (PLC), and understand P&ID's & PFD's & Isometric Drawing.
Knowledgeable with hands on experience in Commissioning/start-up and normal/emergency shutdown procedure of plant operation and equipment such as: Centrifugal & reciprocating pumps, drive motors, Diesel Engine Fire pump, centrifugal & reciprocating compressors, fans & blowers, fan coolers, and air handling units.
Proven track records; of identifying and implementing process controls and improvements that enhances productivity and profitability.
Safety and results oriented team player with strong interpersonal, and communication skills; able to interact with all levels of professionals and deliver effective results.
Computer literate; familiar with basic computer knowledge of MS office.
Hard working and able to work under pressure.
Character References:
Engr. Loreto M. Pedral
QC Manager, JGC Philippines
Contact No.:099********
Engr. Nicanor Abrasaldo
Lead Project Engineer, JGC Philippines
Contact No.: 092********
I hereby certify that the above information is true correct to the best of my knowledge and belief.