Welding Trainer /Welder
Resume:
LORENZO B. ENAD JR.
Home Adress: Purok *, Ubojan, Sagbayan, Bohol, Philippines
Present Adress: No. 46Sampagiuta St. ICC West Service Road, KM 23 Brgy. Cupang, Muntinlupa City Philippines 1771
Mobile No. +63-947-***-****/+63-917-***-****
Email Address: acyus0@r.postjobfree.com
acyus0@r.postjobfree.com
Skype ID: lovejuice.skype
Applying for the position of:
WELDER (SMAW/GMAW/FCAW/GTAW)
SUMMARY OF PROFESSIONAL WORK EXPERIENCES:
With over (10) years extensive experience in the welding industry:
As Welding Trainer/Assessor/Welding inspector:
? Prepare and deliver welding training programs both in theory and practical settings based on the designed welding training programs by the institution/company.
? Train learners from Entry level/Advance level/Expert level in four (4) welding discipline SMAW/GTAW/GMAW/FCAW or a combination of both following the international standards and HSE&Q policy standard.
? Organize and supervise practical welding assignments, conduct evaluations and maintain necessary paper works.
? Assess and certify learners/welders as per international standard required by the institution/company.
? Competent and reliable professional, committed to top quality work, versatile and multi-skilled person.
As Fabricator/Welder (SMAW/FCAW/GMAW/GTAW) - involved in numerous local projects:
? Ship building, remodeling & repair
? Coal plant cement factory
? Steel structure bridges & heavy equipment maintenance
? Container van fabrication & repair
? Plumbing & fire protection fabrication and installation
? Metal door & window louver fabrication and installation
? Wrought iron fabrication and installation
? Centralize LPG fabrication and installation
? LPG cylinder fabrication & repair
? Glucose plant maintenance & repair.
JOB DESCRIPTION / HISTORY:
1. Company : Cape East Philippines Inc.
Address : 6thflri Hub 1, Northgate Cyberzone,
Filinvest Corporate City, Alabang Zapote Road,
Muntinlupa City Philippines 1781
Tel.No.+63 2 501 0020/+63 2 555 1599
Position : Welding Trainer/Assessor/QA QC Inspector/Welder
Period : February 05, 2014- September 30, 2016
Project : Cape Asia Academy/Fabrication Shop
Duties & Responsibilities:
? Display and ability to interpret and evaluate the theories of their field of discipline
? Monitors quality standard and control of all work activities to comply with the specified requirements and international standards
? Prepare and present instruction in both theory and practical settings
? Conducts inspection activities for each category of work
? Clarifies the Inspection Policy, with the existing policy of Cape
? Prepare for internal and external audits
? Organize and supervise practical welding assignments, conduct evaluations and maintain necessary paper works
? Participate internal welding program and development, as well as maintain the standard operation quality assurance of the company
? Review clients WPS and approved according to their codes specification or requirements
? Validates materials, welders and welding procedures test results, welders and welding procedures test approvals
? Addresses requirements in preparation of welding equipments, tools, PPE and consumable materials to be used for actual welding testing
? Learn and use the technology to enhance teaching and educational experience when appropriate
? Teach, train and instruct a welding course appropriate to company standard and field of discipline
? Plan and organize instruction in ways that maximize documented learning to employ appropriate teaching learning strategies and instructional methods to meet the company needs
? Encourage the development of communication skills through appropriate assignments
? Contribute to the selection and development of instructional materials in accordance with course objectives
? Develop and explain methods that fairly measures progress and learning out comes
? Evaluate student trainees performance fairly and consistently to promote maximum learning and teaching
? Exercise stewardship and ownership of the company facilities and materials that being assigned
? Maintain familiarity with company goals, mission and long range plan
? Discuss, explain and implement Health, Safety, Environmental and Quality standards policy
? Conduct safety briefing to the learners/welders prior to the start of the training/qualification test and explained standard acceptance criteria required by the client/company
? Conduct pre-qualification test of our welders prior sending them to the third party
? Do paper works and responsible for the certification of the learners/welders in accordance with the industry/international standards
? Responsible in the issuance of WPQTR, WQT ID if required
? Estimate materials and welding consumables needed for a certain WPS of the clients and/or for our certain local projects
? Perform internal calibration of welding machines, stationary electrode ovens and quivers
? Perform maintenance of welding machines, accessories, power tools and housekeeping in welding laboratory
? Perform plate and pipe cutting and beveling by power hacksaw and automatic gas cutting
? Do welding fabrication job from local clients and/or any welding activities for the improvements of the training facility and fabrication shop
? Perform full welding and fabrication from plate welding to pipe welding using SMAW/GTAW/GMAW, FCAW and OAW
? Able to identify base metals and filler metals each uses to the required code and standards
? Able to used Welding Inspection, Measuring and Test Equipment (IMTE)
? Have a knowledge in engineering tools and equipments, interpret blueprint drawings
2. Company : Philippine Welding Society Inc.
Address : DOST-MIRDC Compound,Gen. Santos Avenue,
Upper BicutanTaguig City
Tel.No.: 632-***-****/TeleFax No.: 632-***-****
Position : Instructor/Assessor
Period : September 24,2013-January 31,2014
Project : PWS Training &Assessment Center/As per Client
Duties & Responsibilities:
? Interview, schedule and conduct an assessment to the candidates
? In charge in monitoring the candidates during the assessment process
? Conduct safety briefing of the candidates prior to the assessment and explained the evidence required
? Perform visual inspection of the test coupons both in plates and pipes
? Do Paper works and responsible for the certification of the candidates who will pass the assessment in accordance with the PWS standards/industry standards and the guidelines of (TESDA) Technical Education
and Skills Development Authority
? Sign WPQTR for those welders who passed the assessment
? Train welding students both in theoretical and practical demonstration. From entry level to advance level & Expert level. From SMAW,GMAW, FCAW and GTAW and a combination of both in CS and SS
? Provide assistance in the training needs of the students both in theoretical and technical aspects
? Maintain tools and equipments available when needed
? Review and verify test coupons after the performance of work
? Train welding students plate to pipe welding in ferrous and non ferrous materials(e.g., CS,SS and Aluminum
? Repair and perform maintenance of welding laboratory and kept tidy
? Manpower/ support group for special projects and activities
? Weld CS, SS and Aluminum steel plates and pipes using SMAW, GMAW, FCAW, GTAW, OAW and a combination of both
? Perform cutting and beveling of plates and pipes by manual/automatic cutting equipment
? Kept welding laboratory always tidy
*Note: Gap between employers. From June 2011 ? Jan 2013 (Employed in a welding shop in our province as per project/as per piece and at the same time as an on call Welding Trainer/Assessor/Welding Inspector)
3. Company : Philippine Welding Society, Inc.
Address : Gate 2, TESDA-NCR Complex East Services Road,
SLEX, Taguig City
Tel.No.: 632-***-****/TeleFax No.: 632-***-****
Position : Assessor/Trainer/Welding Inspector/Welder
Period : June 4, 2008 ? June 13, 2011
Project : PWS Training &Assessment Center/As per Client
Duties & Responsibilities:
? Interview, schedule and conduct an assessment to the candidates
? In charge in monitoring the candidates during the assessment process
? Conduct safety briefing of the candidates prior to the assessment and explained the evidence required
? Perform visual inspection of the test coupons both in plates and pipes
? Do Paper works and responsible for the certification of the candidates who will pass the assessment in accordance with the PWS standards/industry standards and the guidelines of (TESDA) Technical Education and Skills Development Authority
? Sign WPQTR for those welders who passed the assessment
? Train welding students both in theoretical and practical demonstration. From entry level to advance level & Expert level. From SMAW, GMAW, FCAW and GTAW and a combination of both in CS and SS
? Provide assistance in the training needs of the students both in theoretical and technical aspects
? Maintain tools and equipments available when needed
? Review and verify test coupons after the performance of work
? Train welding students plate to pipe welding in ferrous and non ferrous materials(e.g., CS,SS and Aluminum
? Repair and perform maintenance of welding laboratory and kept tidy
? Manpower/ support group for special projects and activities
? Weld CS, SS and Aluminum steel plates and pipes using SMAW, GMAW, FCAW, GTAW, OAW and a combination of both
? Perform cutting and beveling of plates and pipes by manual/automatic cutting equipment
? Kept welding laboratory always tidy
4. Company : Asia Select
Address : 6thflr. The Athenaeum bldg. 160 Levise, St. SalcedoVillage, Makati City
Tel.: 632-***-****/8162466/Fax: 632-***-****
Position : Electrician/Welder
Period : August 14, 2006 ? January 24, 2007
Project : COAL PLANT SAFETY PROJECT
(Lafarge Cement Plant)
- Fortune Cement Corp. Batangas, Philippines
- ABS-CBN TV Station Quezon City, Philippines
Duties & Responsibilities:
? Installed additional gas sample probe in the air vent of the coal plant
? Put additional fire alarm and security devices
? Fabricate cable tray, cable tray support and pipe support
? Perform SMAW full welding of C/S pipes ASTM/SA 106 Gr. B ( 4? ? 10? ? ) Sch. 40, 80, E7018 filler metal.
? Perform manual Flame cutting, beveling, grinding, drilling and painting.
? Secured not works permit prior to work
? Do risk assessment and follow required PPE?s
? Used fire blanket during welding and cutting process and standby fire extinguisher
? Studies blue prints drawing and specifications to determine appropriate requirements.
? Measures / checks. Accuracy and quality a fabricated parts using different kinds of measuring instruments, such as, caliper, steel rules, metric scale etc.
? Assist electricians in installing cable tray and bending and installing the IMC pipe
? Assist cable pulling and wiring connections to electrician
? Perform housekeeping before and after works
? All of the above are in the coal plant of Fortune Cement Plant (Lafarge), below are in the Chanel 2 TV station ABS-CBN Central Tape Library
? Conduct and perform monitoring on the security system devices, piping connections and gas cylinders installed in the central tape library
? 24 hours monitoring inside and outside the Central tape library
? Do observation reports within 12 hrs monitoring duly signed by ABS-CBN (CTL)in charge person
*Note: Gap between employers. From June 2011 ? Jan 2013 (Employed in a small welding shop in the province as per project/as per piece)
5. Company : Chittick Fire & Security Corporation
Address : 5thFlr. Pieco Bldg.
2242 Chino Roces Avenue
1231 Makati City, Philippines
Tel.No.: 632-***-****, 2134, 4120, 5949
Fax: 632-***-****
Position : Welder Fabricator
Period : June 3, 2005 ? November 8, 2005
Project : COAL PLANT SAFETY PROJECT
(Lafarge Cement Plants)
-Continental Operating Corp. & Republic Cement Corp.
Bulacan, Philippines
-Fortune Cement Corp. Batangas, Philippines
Duties & Responsibilities:
? Attend safety toolbox meeting everyday
? Responsible to do all kinds of the welding works in SMAW plates & pipes both in electrical and mechanical works.
? Perform SMAW full welding of C/S pipes in different position, from ( 4? ? 10? ? ) sch. 40, 80, using E7018 for root pass 2.4mm ? and hot pass to capping are 3.2 mm ?
? Perform manual Flame cutting, beveling, grinding, drilling and painting.
? Secured hot works permit prior to work
? Do risk assessment and follow required PPE?s
? Used fire blanket during welding and cutting process and standby fire extinguisher
? Studies blue prints drawing and specifications to determine appropriate requirements.
? Measures / checks. Accuracy and quality a fabricated parts using different kinds of measuring instruments, such as, caliper, steel rules, metric scale etc.
? Assist electricians in installing cable tray and IMC pipes.
? Installing fire alarm and safety devices.
? Assist cable pulling and wiring connections to electrician
? Perform full welding and assist mechanical pipe fitters in piping installation from the Co2 tank house to the coal plant for the supply of Co2 in all the area of the coal plant air vent.
? Follow rules and policies inside the Lafarge cement plant factories.
? Perform housekeeping before and after works.
6. Company : Ferrocraft
Address : M. Rama St. Pooc Oriental, Tubigon Bohol
Tel. No. (038-***-****
Cp. No.: 092*-*******/ 091*-*******
Position : Welder Fabricator /Sub Contractor
Project : Fabrication Shop//On site
Period : November 1, 2003 ? March 1, 2005
Duties & Responsibilities:
? Responsible in accomplishing the contract project
? Fabricate and install the steel gate, grills, fences, etc
? Perform SMAW full welding and tack welding
? Perform manual flame cutting and operate to produce material parts to be used in fabricating the projects
? Studies blue prints drawing and specifications to determine appropriate requirements.
? Measures / checks accuracy and quality a fabricated parts using different kinds of measuring instruments, such as, caliper, steel rules, metric scale etc.
? Monitor the works of the Co-workers
? Teach them the technique on how to strike the iron while hot so that the design of bending will exactly follow
? Responsible in final checking or inspecting the works so that the quality standard of the product were follow properly
? Responsible in monitoring the safety of all men who were involve in the project
? In charge in monitoring condition of the electrical equipment and tools
? Shutdown all electrical power after works
? Performs housekeeping and tool keeping works after works
*Note: Gap between employers. From (April 1997 ? November 2003 Employed in small welding shop in our province, and taking up a vocational welding course)
7. Company : Cebu Fabricators, Inc.
Address : Limbong St. San Jose DelaMonta?aMabolo,
CebuCity
Tel. Nos. : 753-73; 762-89
Fax No. : 63-32-231*-***
Position : Welder
Project : Fabrication Shop / Ship on board
Period : May 1995 to March 1996 and December 1996 to April 1997
Duties & Responsibilities:
? Perform full welding or tack welding in SMAW & GMAW in plates & pipes in ship building, remodeling & repair
? Perform SMAW & GMAW full welding in A36 C/S plate from 8mm ? 50mm thick using E6011, 3.2mm ? for root pass and E7018 3.2 -4.0 mm ? for filling and capping pass.
? Perform full welding combination in SMAW/GMAW, A36 C/S plate, SMAW for root pass & hot pass in E7018 2.5mm ? and GMAW for filling to capping ER70S-6 1.8mm ? filler wire
? Perform full welding in SMAW CS ASTM/ASME A106/SA106 Gr. B from 1? - 10? ?, E6010/11 root pass and E7018 for hot pass up to capping
? Perform full welding, piping installation and hydro test for supply of potable water, chiller, fire protection system with 10% RT
? Perform full welding, piping installation and hydro test for the oil supply of the ship engine
? Perform Oxy-Acetylene cutting and welding
? Assist fitter perform in erection or installation of pre-fabricated parts ship assembly
? Have a knowledge in handling safely in compress gas cylinder
? Have knowledge in blue print drawing and specifications to determine appropriate requirements
? Measures / checks accuracy and quality of fabricated parts using different kinds of measuring instruments(e.g., caliper, steel rules, metric scale)
? Follow the SOP inside the shipyard premises
? Have a knowledge in HSE Awareness
? Perform other task if needed.
IMTE/ Equipments and Tools used:
- Purge Gas/Oxygen Monitor (Weldlogic OM-5)
-Portable Electric Drill- Drill Press
- IR Thermometer (Fluke62MAX) - Power Hacksaw
- Digital Clampmeter (Fluke372) - Speed Cutter
- Digital Multimeter (Fluke 87 V) - Chain Vise
- Film Viewer - Bench Vise
- Weld Gauge (Gal Gage Co.) - Automatic & Manual Oxy-Ace gas cutting
- Mini maglite - Pull-push Rule
- Inspection Mirror - Try square
- Digital Caliper - Spirit Level
- Vernier Caliper - Flint Lighter
- Welding Machine - Wire Brush
Lincoln Invertec V350 PRO-(SMAW/GTAW/FCAW/GMAW) - Chipping Hammer
Daihen AEP 300/ACCUTIG 300P-(SMAW/GTAW) - Ball pen Hammer
- Angle Grinder (4?/7?) - Center/Letter punch
- Pencil Grinder - Pipe & Allen wrenches
- Pedestal Grinder -Portable Electric Drill
- Fliers (Long Nose/Side Cutter/Mechanical/Electrical) -Magnetic Drill
- Full Body Harness
Other Equipments & Tools Used: Other skills
- Hoist crane - Plumbing
- Shirring Machine - Mechanical pipe fitting
- Rolling Machine - Electrical outfitting
- Bending Machine - Basic building wiring and installation
- Press Machine - Spray painting
- Pipe Threading Machine - Carpentry
- Mixing Roll Machine - Roughing-ins masonry
- Weaving Machine - Basic operation (Hydraulic crane)
- Circular Saw
- Band Saw
- Chain Block
- Liver Block
- Manual Pipe Cutter
- Manual Pipe Bender
EXTERNAL TRAININGS:
TWI Ltd, Training and Examination Services CSWIP 3.1 LEVEL 2 April 25 ? 29, 2016
Venue: Makati Philippines
INFORMATICS COMPUTER EXPAC( Executive IT Package ) Mar-May 3 2015
INSTITUTE PHILIPPINES for Office Workers
Festival Mall Alabang, Muntinlupa City
Philippines
MIRDC DOST-NCR & PWS DOST-MIRDC TIG Welding on Carbon Steel Plates Oct 7 ? 11, 2013
Cmpd.,Gen. Santos Ave.,
BicutanTaguig City Philippines
TESDA Women?s Center Assessors/Trainors Sep29- Oct.08-2008
Gate 1, TESDA Complex Taguig AM1/TM1 Training Program
City Philippines
Philippine Welding Society, Inc. Welding Inspector?s Course June 16-20,2008
Gate 2, TESDA-NCR Complex East Services
Road, SLEX, Taguig City Philippines
LABOR-LINK TECH. INSTITUTE SMAW Course NCII May- July 2007
Quezon City Philippines
PHILIPPINE MINING SERVICE On-the-Job Training Oct. 02- 28, 2002
CORPORATION
Garcia-Hernandez, BoholPhilippines
TESDA ? Provincial Training Center Structural Welding (600 Hrs.) July-Sep-2002
Inabanga, Bohol Philippines
TESDA ? Provincial Training Center FARM Implements Fabrication(480 Hrs) Feb.-May 2002
Pilar, Bohol Philippine
TECHNICAL SEMINARS ? Philippine Welding Society Inc. ? PWS
Philippine Welding Society, Inc.
DOST-MIRDC Compound, Gen. Santos Ave, Upper Bicutan, Taguig City
Tel No.: 632-***-**** / TeleFax No.: 632-***-****
The Essential Variables of PWS Conducted By: 4-Sep-2012
Cert. No.: PWS-2ndFTS-A-2012-139 ENGR. DANILO A. CELEBRADO
PWS-Board of Trustees/ Pilipinas Shell Petroleum
Corrosions of Metals Conducted By: 4-Sep-2012
Cert. No.: PWS-2ndFTS-B-2012-139 ENGR. GIRLIE M. MILLO
Sr. SRS ? TABDS/TDD-Metals Industry
Research and Development Center
Hardness Testing Leeb Method and Rockwell Method Conducted By: 4-Spe-2012
Zonotip Ultrasonic Thickness Guage DIR. VIJEY SINGAM
Cert. No.: PWS-2ndFTS-C-2012-139 Regional Managing Director-PROSEQ ASIA
Introduction to Titanium and its Alloy:Metallurgy, Conducted By: 30-Mar-2012
Application, and Welding Practices ENGR. REYNALDO L. DELA CRUZ JR
Cert. No.: PWS-1CS2012-014 Chief-Industrial Training, Metals Industry
Research & Development Center
Achieving Welding Excellence Using 4-Modality of NDT Conducted By: 30-Mar-2012
Cert. No.: PWS-2cs2012-014 ENGR.GERALD S. GALLARDO
VP Sales & Operation, CIFRA Industrial
Services Corporation
Mechanical Testing of Welds Conducted By: 30-Mar-2012
Cert. No.: PWS-3CS2012-014 ENGR ISIDRO D. MILLO
Chief-Proto Typing Equipment, Metals
Industry Research & Development Center
Arcal and MIG/MAG Operation Conducted By: 24-Mar-2011
Cert. No.: PWS-FTS2A-2011-0133 MR. KATSUSUKE NIKI
Air Liquid Technology Center (ALTEC)
Japanese Welding Expert
Thermal Arc Welding Converters Conducted By: 24-Mar-2011 (Welding Demonstration) MR. HENRY L. SANCHEZ
Cert. No.: PWS-FTS2B-2011-0133 Thermal Arc Philippine Welding Representative
Welders and Their Role to Achieve A Flawless Project Conducted By: 8-Feb-2011
Cert. No.: PWS-FTS1-2011-0385 MR. LEON VAN SCHALKWYK
Senior HSES Manager, Construction
Division, Chiyoda Corporation Japan
Hexavalent Chromium in Welding Environment, Conducted By: 3-Nov-2010
Safety & Health MR. EFREN B. IBA?EZ
Cert. No.: PWS-FTS-A11032010-0096 Chairman, Annual Convention & Special Projects
Welding of Stainless (Basic to Advanced) and Conducted By: 3-Nov-2010
Construction of World?s largest ?MEGA?LNG plant MR.HIROYOKI IWAMOTO
Cert. No.: PWS-FTS-A11032010-0096 Chiyoda Philippines Corporation
Natures, Types, Classification and Conducted By: 25-Mar-2010
Uses of Welding Electrodes SAMUEL M. CUNANAN
Cert. No.: PWS-2ndFTS-B0126 PWS-Vice President and Chief Instructor, NTC
Weld Discontinuities, Causes and Remedies Conducted By: 25-Mar-2010
Cert. No.: PWS-FTS-A0126 EFREN B. IBA?EZ
BOD-PWS and Senior Welding Engineer, Bechtel
Construction Operation, Inc
Plasma Cutting Process Conducted By: 22-Jul-2009
Cert. No.: PWS-FTS-0709-00052 JACK BOEHRINGER
Technical Expert ESAB ASIA/PACIFIC Pte Ltd
Welding Metallurgy &Weldability of Metals Conducted By: 29-Apr-2009
Cert. No.: PWS-FTS-0409A-00083 EFREN B. IBA?EZ
BOD-PWS and Senior Welding Engineer, Bechtel
Construction Operation, Inc
Metals Identification and Classification Conducted By: 29-Apr-2009
Cert. No.: PWS-FTS-0409B-00083 ROMMEL A. SAAVEDRA
Conforme Expert
Soci?t?G?neral?d?Survillance
Welding Guidelines for Duplex & Super Duplex Conducted By: 2-Dec-2008
Ferritic-Austenitic Stainless Steel and Welding Advanced EFREN B. IBA?EZ
CrMO Steels for Ultra Super Critical Power Plant BOD-PWS and Senior Welding Engineer, Bechtel
Cert. No.: No.: 0336 Construction Operation, Inc
Behavior of Welds in Service Conducted By: 7-Nov-2008
ERIC J. MONTES
PWS-Public Relations Officer, Chairman,
Qualification & Cert. and Shell Global
Power Brush Basics and Application Conducted By: 7-Nov-2008
BARRY KING
Weiler Corporation-Sales Director for Asia Pacific
Welding Safety Conducted By: 6-Nov-2008
PAUL B. VARGAS
3m Phils., Inc.-Asst. Tech?l Sales Manager,
Occupational &Env?l Safety Div
Surface Tension Transfer (STT) / Power Wave Conducted By: 6-Nov-2008
RICHARD LANE
Training and Technical Manager, Lincoln Electric
Acceptance-Rejection Criteria for NDT of Welds Conducted By: 6-Nov-2008
ROMULO T. CARMEN, JR
Vice President-PWS, and Technical Director-APEX
Engineering Services (AES)
Corrosion of Welds: Causes and Cure Conducted By: 6-Nov-2008
ERIC J. MONTES
PWS-Public Relations Officer, Chairman,
Qualification & Cert. and Shell Global Distribution-
Engineering-Reg?l Reliability & Integrity Leader, Middle East & Asia
TRAINING COURSES / PROGRAMS ? ( INTERNAL) CAPE ASIA ACADEMY ? (CAA) Cape East Philippines Inc.
6thflri Hub 1, Northgate Cyberzone, Filinvest Corporate City, AlabangZapote Road, Muntinlupa City Philippines 1781
Tel.No.+63 2 501 0020/+63 2 555 1599
Warehouse 2A Sunblest Compound, KM 23 West Service Road, Brgy. Cupang, Muntinlupa City, Philippines
1771
Supervisory Management Conducted By: 24-26?May-2016
Development Programme -(SMDP) Mary Ann Andir
Head ? Learning & Development(CEPI-CAA)
CherrylCalabia
Regional HSEQ Manager(CEPI)
BLS/CPR for Lay Rescuers & First Aid Training Conducted By: 16-18-Feb-2016
for Industrial Employees MR. CESAR GUEVARA
MS. CRISTINA ACAYAN
First Aid Trainer ? Rizal Chapter Philippines
Work Safety at Heights ? RIIWHS204D Conducted By: 22-May-2015
TONY THORNHILL
Rope Access Compliance Manager
Far East & Pacific Rim at Cape plc
Cape Australia
TAE40110 ? CERTIFICATE ? IV Conducted By: 6-17-April-2015
( Training and Assessment ? RTO ) KEN FOOTE
Navitas Resource Institute Assessor / Trainer (RTO)
Fire Safety Training Conducted By: March-2015
LGU-Muntinlupa Fire Department, Fire Marshall Personnel
Muntinlupa City, Philippines,
CISRS OPERATIVE Training Scheme Conducted By: 20-Feb-2015
Cert No.: 0059 Andres Pedro
Scaffold Trainer (CEPI-CAA)
Core Values ? Commitment to Deliver Conducted By: 24-Oct-2014
MARY ANN V. ANDIR
Head ? Learning and Development
(CEPI-CAA)
Core Values ? Integrity Conducted By: 18-Jul-2014
Cert No.: 0052 MARY ANN V. ANDIR
Head ? Learning and Development
(CEPI-CAA)
HSE Awareness Conducted By: 12, 18-Feb-2014
ALEX CANLAS
HSEQ Officer/Trainer
(CEPI-CAA)
Computr Literacy:
? XPAC(Executive IT Package) for Office Workers
Affiliation:
? Philipine Welding SocietY Inc.(Member-2010)
Honor & Award:
? Immortality Award
Educational Attainment:
Tertiary: Holy Name University
Associate Computer Science
Tagbilaran City, Bohol, Philippines
Secondary: Saint Augustine Institute
PoblacionSagbayan, Bohol Philippines
Intermediate: Ubojan Elementary School
Ubojan, Sagbayan, Bohol Philippines
Personal Details:
Birthday
Birthplace
Age
Civil Status
Sex
Citizenship
Height
Weight
Language spoken
May 25, 1972
Basak, Lapu-LapuCity, Cebu
44
Married
Male
Filipino
162.56 cm
127.8 lbs.
English, Pilipino, Cebuano
Passport No
Date Issue
Expiry Date
Father?s Name
Occupation
Mother?s Name
Occupation
Address
EC7872741
01 Jun 16
31 May 21
Lorenzo M. Enad Sr.
Retired O.S.
Primitiva B. Enad
Housewife
Ubojan, Sagbayan, Bohol
Refferences:
Ernesto B. Policarpio
ELSE Trading
Technical and Sales Manager/PWS President (2008-2009)
acyus0@r.postjobfree.com
Contact No.: 099********
Tony Thornhill
Rope Access Compliance Manager
Far East & Pacific Rim at Cape plc
Cape Australia
acyus0@r.postjobfree.com
Business: 61-08-925*-****
Mobile: 614********
Dominador C. Eleazar Jr.
PWS Supervisor
acyus0@r.postjobfree.com
Contact No.: 091*-****-***
CherrylCalabia
Regional HSEQ Manager
Cape- Philippines, PNG, East Timor, Myanmar and Thailand
Tel: +63 2 501 0020 extn. 103
Fax: +63 2 501 0033
Mob: +63-928-****-***
I declare that the data given above are true and correct.
LORENZO B. ENAD JR. Date Accomplished:
Signature
Contact this candidate