Mechanical Engineer Engineering
Resume:
CHINMAY JANI
** ****** ******, **** *****, CT,USA- 06516
*******.******@*****.***
EDUCATION:
University of New Haven West Haven, CT, USA
Master of Science, Mechanical Engineering December, 2016
Gujarat Technological University Gandhinagar, Gujarat, India
Bachelor of Engineering, Mechanical Engineering July, 2014
WORK EXPERIENCE:
University of New Haven March, 2016 – December, 2016
Graduate Student Research Assistant Connecticut, USA
Worked with UNH BMD iLab (http://www.unhbmdilab.com/#!group/ffy2p)
Did supervision of lab and assist undergraduate research assistant
Did Research project on Bio-Medical surface coating devices
Monitored the other students’ research projects and help them.
Train for ATR- FTIR Diamond under supervision of Dr. Nancy Savage, Associate Dean, University of New Haven
Train for XPS Machine under supervision of Dr. Min Li, Director of Yale West Campus Materials characterization core
Worked in Yale Energy Science Center- Materials characterization Laboratory
Research experience in polymer, surface modification, fouling studies, bio-compatibility, blood coagulation.
Experience on Testing Machines: XPS machine, SEM/EDS Analysis, Perfusion Pumps, Tube revolver, UV-Vis machine, pipettes, transonic flowmeter, Stirring hotplate and balance, Centrifuge, Bio-reactor flow cell, Innova Incubator, Z1 Dual Threshold Coulter Counter, purge vessels, Sievers Nitric Oxide Analyzer.
University of New Haven April, 2016 – Present
Diversity Peer Educator Connecticut, USA
Diversity Peer Educator for academic year 2016-2017
Managing with Office of Intercultural Relations
Panel discussed with UNH Students Affairs Staff on Indian Culture
Communicate with community and organize cultural events
Flexican Bellows and Hoses Pvt. Ltd August, 2014 – June, 2015
Production Executive Gujarat, India
Responsible for determined the best and most efficient uses of equipment and labor, to meet production goals.
Monitored the progress of production, confirmed that it stays on schedule and within budget, met regularly production team and managers to analyze problems and ensure cost-effective, high-quality and timely delivery products.
Lead and drive continuous improvement.
Strong customer service mindset.
Experienced of product development and design process.
Experienced in process safety knowledge management and understood of principles and team building processes.
Experienced of operations management, inventory, supply chain and material management, purchasing and logistics.
Experienced of ISO quality management system and ISO manufacturing standards.
Experienced on Automation System.
Experienced on FAILURE MODE & EFFECTIVE ANALYSIS (FMEA), PRODUCTION PART APPROVAL PROCESS (PPAP), PROCESS CONTROL (PC), MEASURING SYSTEM(MS), LOGISTIC SYSTEM ANALYSIS(LSA)
Shree Sponge Steel & Forging Ltd. April, 2012 - May, 2014
Mechanical Engineer Intern Gujarat, India
Participated as a multidisciplinary engineering team member.
Performed material selection and sourcing.
Fabricated mechanical parts and assemblies used machine shop.
Involved in product development and worked with R&D team.
Understood the casting process with different materials: Carbon Steel, Stainless Steel, Alloys Steel, and Manganese Steel.
Achieved testing operations- Testing: Compression and Tensile testing, Mould testing, sand sieve analysis.
Flexican Bellows & Hoses Pvt. Ltd April,2011-February,2012
Mechanical Engineer Intern Gujarat, India
Worked with machine shops to have new products-bellows created.
Assisted mangers in creating concepts and design/approaches for new products/processes/test method.
Completed basic tasks on engineering documentation.
Worked on engineering change orders.
TECHNICAL SKILLS:
Workbench ANSYS, CATIA, SOLID WORKS, Microsoft Office, Continuous Improvement, Lean Manufacturing, Product Development, Data Analysis, Planning Schedule, Writing Proficiency, Public speaking, Critical thinking, Attention to detail, communication.
COURSES TAKEN:-
Computer Aided Engineering, Finite Element Methods, Advanced Fluid Mechanics, Advanced Dynamics, Engineering cost estimation, Elasticity, Mechanical Engineering Analysis, Applied Heat Transfer and heat conduction, Application of polymers, Research Project-1: Bio-Mechanical Engineering ( Surface Coating Device), Research Project-2: Design of Sample Collecting Vessel
CERTIFICATION COURSES:-
Certificate course in ANSYS with “S” grade
Certificate course in CATIA with “S” grade
RESEARCH PROJECTS:-
Stability testing of Polyethylene glycol “Anti-clotting” coating
The goal of this proposal was to test the stability of PEG coatings under physiological conditions in an in-vitro test system. My hypothesis is that under physiological flow, a stable coating will remain bound to the surface of blood-contacting devices and maintain their pre-flow “anti-clotting” property.
Made solutions with different using chemical groups: PDMS, Amine group, PEG
Tested samples on machines: UV, XPS machine, FTIR machine, XRF machine, Raman spectroscopy
Data analysis, which components are active on PDMS-PEG from Yale University’s lab and University of New Haven’s lab
Tested %fouling by using ELISA Testing
Run samples on perfusion pumps to create in-vitro system
Run samples on perfusion pumps under shear stress
Design of Sample Collecting Vessel for controlled lab reactor
The objective of the project is to study the technical feasibility of sample collection vessel to reduce pressure and to enhance the efficiency of lab reactor system.
CAD design of Sample collecting vessel in Solidworks.
Set up for flow simulation in CFX-ANSYS.
Instrumentation/Procurement.
On going research project.
MECHANICAL PROJECTS:-
Pneumatic Antilock Braking System with Drum Brakes PABS
The objective was to reduce stopping distance, slip ratio, without locking or wheel slippage and achieve uniform brake lining wear on commercial vehicles.
Made CAD design in SOLIDWORKS.
Design of P-ABS, actuator, triggering circuit and other essential components
Assembly of parts and testing of project
Measured time duration for perfect pressure in compressor to apply brake
3D Modeling and Design Analysis of Aircraft Hydraulic Push Bracket
Made 3D design in SOLIDWORKS and used for analysis Workbench ANSYS software
Used Material and comparison: TITANIUM and ALUMINIUM
Comparison of Material in terms of Stress, Reliability, Durability, Safety Factor, Safety Margin
Material Properties
Analysis:- Force Reaction, Equivalent Stresses, Deformation, Safety Factor, Safety Margin, Natural Frequencies
Analysis:- Load Conditions, making safe and light-weighted design
Design iterations and parametric capabilities
Calculation theoretical Structural Load on Design and Optimize Design
3D Modeling and Design Analysis of Aircraft Rappelling Attachment Lug
Made 3D design in SOLIDWORKS and used for analysis Workbench ANSYS software
Material data : Aluminum 7075 and Steel : 4130
Mesh generation, controlling the mesh
Loads and boundary conditions
Different mesh densities or element sizes
Results post-processing
Spring-Mass-Damper System
Made 3D Design modeler used software: SOLIDWORKS
Did simulation in SOLIDWORKS
Did analysis used motion of study
Made mathematical model and solved by numerically
Made MATLAB code for system
Comparison from graphs: SOLIDWORKS and MATLAB
Flow of fluid in a tank-computational fluid dynamics & hear transfer
Made 3D geometry used software: ANSYS software
Meshing control and element sizes
Set up for steady and transient flow in CFX-ANSYS Modeler
Comparison of results: Steady and transient
Used different fluid properties and setup in CFX-ANSYS Modeler
Checked and set for the results of mixed gas flow in a tank
3D Modeling and Design Analysis of Aircraft in air-Velocity analysis on wings
Made 3D geometry used software: CATIA software
Using materials for aircraft structure design
Meshing control and element sizes
Set up for velocity analysis in CFX- ANSYS Modeler
Checked the results how is affected velocity of air on aircraft wings
3D Modeling and Design Analysis of Drone Predator
Made 3D geometry used software: CATIA software
Using composite materials for drone structure design
Meshing control and element sizes
Set up for analysis in CFX & Fluent - ANSYS Modeler
Checked the results and analysis
Analyze a conventional residential wall section in 2D
Made 2D Modeling of Residential Wall with different sections in AutoCAD
Residential Wall with sections-Wood Stud, Gypsum Board, OSD, Insulation
Applying materials at sections in THERM software
According to thermal conductivity of materials, analysis of residential wall in THERM software
Discuss results including temperature contours in THERM,MATLAB, ANSYS
Calculate Thermal Resistance by analytical method
Analytical hand calculation of thermal resistance and compare with THERM results
MATLAB coding for composite wall to find temperature on nodes and found thermal resistance
Compare 1D analytical results and 2D analytical results
3D Modeling and Design Analysis of Aircraft Bell Crank Lever
Worked with and created 3-D CAD geometry.
Finite element model building including:
Mesh generation, hex meshing, Controlling mesh density intentionally in discreet locations, Material data.
Structural loads and boundary condition applications.
Part to part contact interaction.
Results post-processing for sanity checks, location, and magnitude evaluation.
Modal analysis results evaluation.
Design iteration/optimization.
3D Modeling and Design of Prosthetic Leg with bio-polymers
Design CAD model in SOLIDWORKS
Used bio-materials polymers for analysis: PEEK, PUC 65D
Focused on these properties: High durability, yield strength, life cycle
Used Finite element method
Hex-dominant meshing, Static load applied according to various conditions
CAD Model analysis results evaluation
LEADERSHIP EXPERINCES:-
Committee member of GSC Professional Development of University of New Haven
Committee member of GSC Social Chair Committee- University of New Haven
General Secretary of KJIT college during undergraduate
Member of AIESEC during undergraduate in KJIT college
ACHIEVEMENTS:-
Won photography contest-Global Snapshot Contest-2015 in University of New Haven (2015).
Worked as event coordinator in non tech fest festival in KJIT College (2013).
Prize and certificate from K.J Campus College for second best performance in essay writing (2013).
Handle more than 200 participants in Treasure Hunt Event in KJIT College (2012).
Worked as event coordinator for technical festival in KJIT College (2011).
Contact this candidate