Kirk J. Englehaupt

*** ***** **** *****

Medina, OH 44256

Phone: 330-***-****

E-mail: acyt7s@r.postjobfree.com

I am a senior level Project/Program Management Engineer seeking long term placement within an aggressive growth, results oriented and quality conscious organization. I provide the capacity to meet the requirements of your customers and business goals for quality, profitability and productivity.

My extensive project/management engineering success in various industries involves all the facets of product development, validation and sustaining. These projects and designs span the automotive, commercial, industrial, mobile hydraulics, military and aerospace markets. My experience encompasses all the various stages of product development. This is, from an initial concept to a shipped deliverable which satisfies the customer’s requirements. My past project achievements have been obtained by my use of effective communication, engineering expertise and application of project management principles.

Parker Hannifin Aerospace – RR, Boeing, GE Aerospace – Program Management – $4.8M

GE Transportation – Canadian National & Pacific – Control System Upgrade – $1.8 M

GE Energy – Scintillation, He3, Neutron Sensors – Results + $600 K/Yr.

Perry Nuclear –NRC Audit and Fatigue Analysis – Reactor Recertification

Daimler Chrysler – Hurst, SRT-10 – Results + $375K / Yr.

Curtiss Wright – NAVSEA, Flow Control Products – LPD-17 – Results + $425 K/Yr.

Crane, Dresser-Rand – Turbine Pumps – GE Invecta –Results + $632 K/Yr.

Champion – Hydraulic System – C Series Road Grader – Results + $432 K/Yr.

Timken Company – Continuous Improvement – Results – Cost Reduction + $428 K/Yr

Rolls-Royce Energy– Petronas / Petrobas Petroleum Projects - $48 Million

Project Summary

Project Management/Engineering/Design/Production experience involving internal, external and international projects. Expertise in problem solving production, product development, and qualifications issues with diverse organizations, General Electric, BMW/Rolls-Royce, Textron Lycoming, Sikorsky, Boeing, Nozaki, Dresser-Rand, Crane, Champion, TL Smith, Timken, Caterpillar, JCB, Mitsubishi, Technofan, JDP, DaimlerChrysler, Halliburton, Tremec and the NRC.

Applied Technologies Summary

Project Management, MS Projects, MS Suite, Audits, ISO Certification, PMP Certified Training, Six-Sigma, PMP, Mechanical Design, Analysis, Mechanics, Stress Analysis, Materials, Applications Root Cause Analysis, Reverse Engineering, ASME, NRC, FAA, SAE, Research, Electronics, Thermodynamics, AC/DC Motors, Hydraulics, Controls, Fluids, Basic, CNC Control Languages, Design Software, ANSYS, Cosmos, AutoCAD, Cadam, Pro-Cadam, MathCAD, ProCad, Solid Edge, Solid Works, MRL and Pro-Engineer Wildfire

Education

ASMET & BSMET, University of Akron

Best Regards,

Kirk J. Englehaupt

Professional Work Experience

Project Manager: Parker Hannifin Aerospace - GTFSD, 08/2015 to 08/2016,

Responsibilities: Project Management, Planning, Turbine Fuel Nozzle Product Development, NPI execution. Cost Reduction, Earned Value Financial Measurement, Establishing Project Framework & Production Process Execution.

Applied Technologies: Project/Program Management, Product Development, Team Leadership, Personnel Management, Problem Resolution, Cost Reduction & Project Plan Execution.

Results: Managed Small & Large Cap Projects, Lead Cost Reduction Project – 400 K yearly savings, Procurement, Boeing MRL Assessment, MIL Spec Project Development, Integrated/Monitored Project Scope from Initiation to Production

Project Manager/Mechanical Engineer: GE Transportation Systems, Erie PA 07/14 to 04/15

Responsibilities: Project Engineering & Management, Mechanical Engineering, Industrial Controls, Production Support, Personnel Management, NPI Implementation, Reliability, EI Support, Procurement & Cost Reduction

Applied Technologies: Project/Program Management, Reliability, Locomotive Production Support, Circuit Analysis, Fabrication, Commissioning & Industrial Site Support

Results: Lead PE for the Design, Development and Processing of Large Cap Reliability and Cost Reduction Projects. Initiated Problem Resolution Strategies, Root Cause Analysis and Negotiated Procurement for Builds. Established PMI principles and processes into the organization.

Project Manager/Mechanical Engineer: Dematic, Brecksville, OH 03/2013 to 11/2013

Responsibilities: Project Management, Mechanical Engineering, Packaging of Conveyor Equipment for Distribution Centers, BOMs, Specification Compliance Documentation, Personnel Management, Structural Design, AutoCAD & Site Management

Applied Technologies: Project Management & Engineering, Conveyors, AutoCAD, Personnel Management, Customer Relations, Mechanics, Fabrication, Commissioning & Industrial Site Support

Results: Designed/Commissioned Conveyor Systems, Managed Site Installations, Surveys & Customer Relations

Project/Mechanical Engineer: Rolls-Royce Energy, Mount Vernon, OH 07/2011 to 03/2013

Responsibilities: Project Engineering, Packaging of Turbine Systems, BOMs, Global Procurement, Specification Compliance Documentation, P&ID Diagrams, Flow Control Design, Piping Design, Project Management, Aftermarket Support, Structural Design & Resource Management.

Applied Technologies: Project Engineering, Retrofit, Field Support, Design of Turbine Systems, Processing, Procurement of Large Cap Industrial Components, Structural Design and Evaluation, Project Management, Maintained Project Timelines & Milestones. Successfully Coordinated Engineering Personnel, Performed Engineering Analysis for Flow Control, Environmental, Control/Sensors Configuration, Gear Boxes, Generators, Compressors and Safety Systems.

Results: Successfully Managed the Design, Development and Processing of Two Large Cap Projects. Initiated Problem Resolution Strategies, Root Cause Analysis and Negotiated Procurement for Builds. Initiated Quality Techniques to Resolve Compliance Issues and Achieved Project Goals. By Utilizing a Diverse PE/Mechanical Engineer Skill Set Attained Improvements in Production, Internal Process and Design of Units.

Independent Consultant, Project and Contract Mechanical Engineer,

Englehaupt Enterprises, 09/2002-07/2011

Responsibilities: Project Engineering, Incident Investigation, Product Design and Development, Continuous Improvement, CAD Design (Solid Works, Solid Edge and Pro-Engineer (Wildfire)), Design, Analysis, Qualification Testing, Technical Documentation, Product Support, Production Support and Implementing New Technologies into Manufacturing

Applied Technologies: Mechanical Analysis, MS Projects, COSMOS, Continuous Improvement, Six-Sigma, PMA, Solid Works Design and Analysis, Pro-Engineer Wildfire, Product Design and Development, MathCAD, Product Qualification and Testing, FDA Spec., SAE Spec. NRC, ASME BP code, Technical Documentation, Incident Analysis, Market Research, Capacity Planning, Lean and Process Controls

Results: New Product Development, Enhanced Productivity, Production Process Definition and Improvements, Cost Reduction, Waste Reduction, Analytical Analysis, Project Management Organization, Increased Profitability, Designed solutions for the Market Place, Generation of Revenue from Cost Savings, Liability Reduction, Technology Application Solution Provider, Safer Work Place, Increased Production and Reduction in Timeline of New Product Development. I have provided the engineering expertise to yield additional revenue from the development of new products, capitalize on emerging markets and solutions to remove production roadblocks.

Mechanical Engineer, Nabtesco Aerospace, Redmond WA, 01/2008-06/2008

Responsibilities: Manufacturing Process Creation and Development, Technical Writing, Revision and Document Review.

Applied Technologies: Technical Writing, FAA Process Review, CMM Revision, Audit, FAA Service and Repair Process Development and Review

Results: Process Improvement, Product Development, Reduced Timelines, Productivity Improvement, Specification Compliance, Qualification Audit and Cost Reduction

Project Test Engineer: Tuthill Controls Group, Tacoma WA, 09/2007-01/2008

Responsibilities: Project/Product Engineering, Test Plans, Product Design and Development, CAD Design, Analytical Analysis and Product Technical Support.

Applied Technologies: Solid Works Design, Detailing, Aerospace Acceptance Documentation, Project Support, Test Stand Design, Analysis, Failure Analysis, Problem Solving, Certification Testing and Qualification Testing

Results: Qualification Testing, Problem Resolution, Test Equipment Designed and Implemented, Equipment Quoted and Sourced, Organized Test Facility, Initiated Corrective Action

Lead Engineer, GE Energy Reuter-Stokes, Twinsburg OH, 06/2005-06/2007

Responsibilities: Project Engineering, Research and Development of Nuclear and Scintallation sensors, Qualification and Acceptance Testing, Solid Modeling, Design Analysis and Reverse Engineering

Applied Technologies: Dynamic Thermal, Shock/Vibration, PMT Optical Testing, Qualification, Neutron Detection Sensors for Nuclear Applications, Applications, Design and Qualification/Certification Testing

Results: Expanded New Product Base with Several New Scintallation, He3 and Nuclear Sensors, Increased Throughput, Resolved Production Roadblocks, Successfully Qualified New Product, Resolved Production and Design Issues, Initiated Sales/Marketing, Production and Generated New Product Revenue for the Business

Project and Mechanical Engineer, Mr. Gasket Company, Cleveland, OH 06/2003-03/2005

Responsibilities: Project Engineering, Design, Tier I and II OEM Launch Support, Qualification Testing, Research and Development, Reverse Engineering, Materials Research, Manufacturing and Sales Support.

Applied Technologies: Project Management of OEM Lines, Problem Solving, Reliability, Manufacturing and Product Application, Performed OEM Quality Audits, Implemented Corrective Action, PPAPS, FMEA and Document Preparation, Qualification Testing, Customer and Supplier Interface, Metallurgical Analysis, Heat Treatment Analysis, Analytical, Fatigue Analysis, Costing, Solid Modeling, Test Equipment Design, Clutch Analysis, Friction Material Research, Production Documentation Standardization and SRT-10 Field Testing

Results: Initiated OEM Quality Processes and Procedures, Gained Qualification OEM Hardware, Sourced New Vendors, Successfully Managed DaimlerChrysler Line, Generated Revenue, Resolved Production Issue, Developed Product Line, Designed and Fabricated Test Equipment. My engineering expertise generated $ 375 K/Yr in new product revenue for the organization, $ 1.2 M potential.

Project Engineer: Curtiss-Wright Flow Control Corp., Brecksville, OH 08/1999-08/2002

Responsibilities: Project Engineering, Management, Product Development, Design, Rapid Prototyping, Qualification Testing, Materials Research, Manufacturing Support, ASME Code Certification Testing and Analysis

Applied Technologies: Lead Project Engineer for New Naval Product Line, Designed, Developed and Qualified NAVSEA code valves, Pro-Engineer Solid Modeling, Detailing, ASME, National Board Qualification Testing, Code Welding Certification per ASME Code, Production Support and Product Sustaining, Exotic Seal Testing and Qualification, Casting Design and Detailing, Green Sand, Investment, Procurement of New Product and Materials, Interfacing with External and Internal Customers, New Product Reliability Testing and Trouble Shooting

Results: New Materials for Harsh Applications, Resolved Production Issues ($ Savings), Lead Project Manager and Designer for New Flow Control Product Line, Recertification/Qualification of Standard Product, Initiated Program Management Structure, Successfully and Qualified New Product Line and Generated New Product Revenue for the Organization. My engineering expertise generated $ 425 K/Yr in new product revenue for the organization, $ 2.5 M potential.

Director of Engineering: Integrated Hydraulics, Mentor, OH, 10/1997-08/1999

Responsibilities: Director of Engineering, Quality, Configuration Control Implementation, Rapid Prototyping, Solid Modeling and Integrated Hydraulic Circuit Design, Hydraulic Valve, Circuit Analysis, Network Administrator, Manufacturing Support and Process Control

Applied Technologies: Designed, Developed, Tested New Hydraulic Circuits for Various Applications, Implemented, Initiated Engineering Systems, Interfacing with External Customers for Applications, Performance, Trouble Shooting, Developed and Implemented ISO Quality Control System, Solid Edge CAD Design, Detailing, Quantitative Hydraulic Flow Analyses, Application of Control Valves, Pumps and Actuators, Managed New Product Design from Concept, Prototype, Qualification and Production, Generated Technical Proposals, Product Testing and Qualification Specifications.

Results: Implemented ISO Quality Control System, Successfully Implemented Sales/Marketing/Design Rapid Prototyping Program, Generated New Product Developments and Achieved a Greater Level of Team Involvement in Business. My engineering expertise increased yearly profits/sales and the release of new product for sustained profit growth consistently over tenure.

Project Engineer, Crane Lear Romec, Elyria, OH, 04/1996-10/1997

Responsibilities: Project Management, Planning, Pricing, Product Development, Design, Manufacturing Support, Technical Writing, Product and Design Reviews, Incident Investigation, Tool Design, Internal Research, Reliability, Experimental and Qualification Testing.

Applied Technologies: Designed, Developed, Qualified Aerospace Hardware, Pro-Engineer Certified Training, Supported FAA Service and Repair Facility, Created Technical Reports, Qualification, Production Procedures, Acceptance Testing, Project Management, Continuous Improvement, Cost Analysis, Applied MS Projects, Total Quality Management, Project Management Techniques, Interfaced with External and Internal Customers, Lead Engineer, Dresser-Rand Turbine Pump

Results: Successfully Qualified Hardware to FAA, Mil and Customer Specifications, Quality Production Problem Solution Champion Successfully Led Program for New Product Line, Achieved Team Development for New Product Implementation, Achieved Company Record for New Product Development; . My engineering expertise generated $ 632 K/Yr in new product revenue for the organization, $ 2.8 M potential.

Education

ASMET, BSMET & PMP Certification, University of Akron

Contact this candidate