Manager Engineering
Resume:
Joey Felix
“A Tool & Die Engineer III”
Sunrise, Florida 33323
Cell 954-***-****
acyswn@r.postjobfree.com
PROFESSIONAL PROFILE
oFocused on setting up efficient vendors
oEnthusiastic, detailed oriented, effective, to their proper perspective.
oSpeak and write fluid English.
oEnergetic, self-starter committed to assessing patient needs.
oFlexible Hours.
oSelf-Transportation.
oSat on the Board for South Florida Machinist Apprenticeship Program here.
oTraining specifically for manufacturers
oCEO and O
oMaintain a Multi task full Behavior throughout working Morality.
EMPLOYMENT HISTORY
Aircraft Electric Motors, Miami Lakes Florida 10/2014-Current
oSpecializing in AUTOCAD, AUTOCAD LIGHT and SOLIDWORKS 3D Designing, all tooling for engineering processing
oAerospace Tooling per FAA Regulations 0.000 Tolerance. Exotic Jigs, Fixtures, Tooling, and Dies for Copper, stainless steel, and any and all precious metals per regulations.
oDesign, produce, manufacture bending tooling for future and gaining momentum on our competitors.
oBuild manufacture Special Presses to accommodate Tooling per customer.
Ebway Tool and Manufacturing, Ft ldle, Florida 4/2014-10/2014
oSpecializing in AUTOCAD, AUTOCAD LIGHT and SOLIDWORKS 3D Designing, all tooling for engineering processing
oHigh compression .1875 to .750 thick material only 50 tons compression.
oBuild manufacture Special Presses to accommodate Tooling per customer.
Tool and Die Manager - LIST Industries, Deerfield Beach, Florida 2005/ until/2013
oMaking Maintaining and service all major High Speed Progressive, Compound, Fine, Draw, and all Precision Stage Tooling Associated
oTrouble shooting, correcting and applying to all problems existing associated with final part
oMonitoring providing proper decision making due to inconsistencies of import material High Speed Progressive, Stage, Compound, Prototype and all customers’ requirements per print
oEngineering Processing: able to create an assembly line from tooling to personnel from scratch at the most efficient and proficient system best profiting company
oDesigning progressive High Speed, thick gages and Aerospace Tooling (tight tolerances)
oSpecializing in AUTOCAD, AUTOCAD LIGHT and SOLIDWORKS 3D Designing, all tooling for engineering processing
oAble to design, manufacture, assemble, create Advance Tooling
oDevelop position in its proper engineering team or lesser than capable to performing all and any task at minimum employee cost
oResponsible for all staffing, scheduling and payroll
oResponsible for Purchasing of all materials within budget limits
oStrong Corporate Relationship with all Vendors
Tool Room Manager –CC Tool and Engineering, Oakland Park, Florida 05/1999 – 05/2005
oResponsible for Full Production, Tool Room, Quality Control and Shipping
oResponsible for scheduling and overseeing 15 employees
oISO: 2000 Certified
Tool and Die Maker - Micro Pneumatic Logic - Lauderdale, Florida, FL 10/1997 – 05/1999
oProject assignment from prototype
oInitial engineering drawing to final element of the Dies or Tooling’s
oService and maintain other shop dies and or sensitive secondary Products
oSharpen, Polish, Retime, Reassemble Any and all Tooling’s as may be necessary
oISO 9000
Tool and Die Maker at Peerless Instrument - Ft. Lauderdale, Fl. 02/1995 - 10/1997
Tool and Die Maker- Progressive Tool and Die - Ft. Lauderdale, Fl. 01/1993 - 02/1995
Tool and Die Maker- Felix Steel Rule Dies – Fort Lauderdale, Fl. 01/1984–02/1993
SKILLS
Administration Skills
Engineering Processing, Supervising and conducting over 80 employees per project.
Able to Design, manufacture, establish and create a Team Vector to provide any and all metal, plastic, stamping, pneumatic, Electronics or what all if anything the customer requires forming an efficient and proficient assembly line in the United States.
Mold and Die Repair –
Experienced in setup, repair, Quality control, first Piece (Pilot Run), and operation of High Speed Stamping, Single stage, Tools, including setting including OBI, straight side, Hydraulic and Air Ram Presses form 10 tons to 12,000 tonnages. Personally Take and assume full responsibility for a structurally organize; successfully Pilot Run. Prior to handing off to production.
Proficient in complicated changeovers, cleaning, sharpening, debugging, and maintaining progressive, Fine Blanking, Reverse, Cam, All simulations of Foreign Tooling including their jigs & Fixtures, Progressive Compound Dies, Etc….
Proficient in trouble shooting and repairing plastic injection molds and all that involves
Machine Building
Capable of designing, manufacturing from scratch fitting and building semi-automated assembly equipment per customer print drawings
Knowledgeable in pneumatics, Gas cylinders, and basic Electrical applications in aptitudes per applications
Continuously reinforcing a multi-tasking Efficiency’s(working environment)
Familiar with ergonomics, OSHA, and safety requirements per Industrial Standards.
Skilled in adjusting, design, and modifying complete Roll Forming Lines, traveling cut off tooling and assembly machines to perform to their maximum potential. In addition to Engineering processing the whole production Lines.
Gear Cutting
Capable of calculating diametrical pitches, ratios and angles of fine pitched gears
Steel Rule Dies
Precision cutting of geometric patterns for steel rule dies
Laser Cutting and Automation Bending.
Experienced in design and layout Box Engineering, corrugated products
Experienced in machine various types of materials such as plastics, aluminum, bronzes, hardened and stainless steels. Can Build Clicker, Fine 2, 3.4, 5, 6.pt Steel Rule by hand bending...
Machining
Acquainted with Programing, CNC’s milling machines, Sinker, and Wire EDM machining.
Able to build precision Tools, Dies, Metal Stamping Prototypes, Jigs, Fixtures and assembly
Performing die and mold mechanics, able to troubleshoot complicated tools by minimizing down time
Designed and manufactured Pneumatic machines
Capable of holding .0002 tolerances consistently and efficiently
Designing
Design any metal forming Tooling, Progressive, Compound, Fine Blanking, reverse, Traveling, Stage.
Design Certified in Auto Cad and Solid Wk.’s 3D; advanced Tool designing.
Design complete automation lines per customers satisfaction
Design complete plastics assemblies within an Engineering process.
REFERENCES:
Douglas Guy, Tool Room/ Production Supervisor
Catherine Bennett Owner.
EBWAY Stamping
2980 NW 62nd street
Ft. Lauderdale, FL
Steve Burnside– Owner
General Stamping
Haleigh, FL. 33302
Bill Farrell – General Manager
Bill Farrell – Production Manager
CC Tool and Engineering
115 NE 3nd Street
Oakland Park, FL 3334
Jesus Muriel-Engineer
Jesus Muriel – Machine Shop Supervisor Manager
Aircraft Electric Motors
5800 NW 163 Street
Miami Lakes, Florida 33014, USA
For further information please contact me Joaquin Felix @ 954-***-**** or @
acyswn@r.postjobfree.com
Contact this candidate