SANDEEP POPAT WALUNJ

E-mail: acyoi1@r.postjobfree.com,Mob:+91-773*******,773-***-****(INDIA), +601********(Malaysia) LinkedIn ID : Er. SANDEEP WALUNJ, Skype ID : sandeepwalunj108 1 of 4

Career Objective:

To curve out niche for myself in Instrumentation and Control Engineering and bring good reputation to the esteemed organization & myself to the possible extent. Summary:

Competent, Highly skilled,reliable Instrument Engineer with detail engineering experience of 10.5 years

& construction site handling experience of 3.8 years, overall 14+ years of industry experience and proven technical expertise in the field of Design Engineering, Project and Quality Management within Oil

& Gas (Onshore & Offshore), Refinery and Petrochemical,Terminal automation,Power,Waste water plants, distilleries projects.

Exposed to various phases of project cycle from Proposal, Concept, FEED, Detail Engineering, FAT, SAT, Construction & Commissioning support for reputed clients.

Software used includes INTOOL (SPI Ver. 7.0), AutoCAD, InstruCalc and Kelton.

Experienced in handling the complete engineering of project entailing planning, resource utilization and manpower management. Carries strong analytical, relation building, influencing, communication and time management skills.

Technical Summary:

Adroit in preparation of Instrument specifications, datasheets, design basis, procurement support involving preparation of inquiry requisitions, preparation of Technical Bid Evaluation, review techno- commercial vendor offers, Purchase Requisitions.Co-ordination with Vendors for Technical Query resolutions, Bid Evaluation, Bid clarification meeting, Kick-off meetings and document approval.

Inter discipline coordination with other engineering disciplines for design inputs and Interface Engineering, Coordinating with design team for Instrument Layouts, Installation drawings, Hook Up Drawings, Junction box wiring diagrams and Loop Diagram.

Participated in Design Review, HAZOP & Alarm Rationalization Study for instrumentation. Goals :

Looking forward to work in a prestigious organization, where I can solely implement the acquired educational, technical skills, knowledge and can establish myself as an asset to the organization in the field of electrical and instrumentation and to improve technical excellence to make our self a undefeated for all challenges. Strength:

• Strong leadership and communication skill.

• Commitment for adherence to Quality Systems, International Standards, Best Engineering Practices and Environmental Standards for ensuring highest degree of quality and safety in design.

• Proficiency in conceptual design and detail engineering of C&I Systems.

• Expert in applying theoretical and practical knowledge for analysis and solution of engineering problems Educational Qualification:

Bachelor of Engineering (Instrumentation & Control), 2002 from PDEA’s College Of Engineering, Pune University. Professional certification:

• BOSET certified, CONSIST Malaysia License no. : M-B/3393/42302,Issue Date May 2013, Expiry Date Apr 2017

Sandeep Walunj

E-mail: acyoi1@r.postjobfree.com

:+91-738******,773-***-****(INDIA),+601********(Malaysia) LinkedIn ID : Er. SANDEEP WALUNJ

Skype ID : sandeepwalunj108

SANDEEP POPAT WALUNJ

E-mail: acyoi1@r.postjobfree.com,Mob:+91-773*******,773-***-****(INDIA), +601********(Malaysia) LinkedIn ID : Er. SANDEEP WALUNJ, Skype ID : sandeepwalunj108 2 of 4

Computer Skills:

• Windows 7/9x/NT/2000/XP, Sound knowledge of major MS Office Tools like Excel, Access, Visio, PowerPoint, Outlook, Project etc. Design software like SPI (Intools), AUTOCAD. Achievements:

• Received an appreciation certificate from JCT Fabrics, Phagwada, Punjab for excellent project technical and quality work, commissioning and co-ordination till customer satisfaction and for successfully execution/commission of boiler-turbine project.

• Received an appreciation certificate and award name as “FIGHTER “from THERMAX Ltd.

• Received an appreciation certificate by PETRONAS for successful commissioning of Duyong flow Metering skid-offshore platform.

• State level athletics player in Marathon.

• Tech-pot quiz competition winner in Pune University inter-competition arranged by PICT College of Eng. Pune.

• Winner in Marathi-Singing competition arranged by Reliance energy Ltd, Mum. Under Maharashtra zone.

• Works as an active member for “Sahajayoga Foundation” which works for human transformation eternally based on scientific meditation techniques on autonomous nervous system which benefits in developing the interpersonal relations & balanced life structure. Received appreciation from many institutes for successful Stress Management Seminars conducted for corporate people. Key Accomplishments

• Handled IOCL, Baroda construction site as a Manager- Instrumentation for 1 year.

• Worked in Creative Ashtech (Reliance ADA group) as Head of Department-Instrumentation for 1.7 Yr..

• Established the IDC (Inter-department) Check procedure for E&I, improved & optimized the design-detail engineering practices and methods in Misi Setia Oil & Gas Sdn Bhd, Malaysia. Created technical design spreadsheet, Created proper databank for Electrical & Instrumentation dept. for the future projects. Improved drawing-deliverable quality by training draftsman personally.

• Successfully prepared different excel sizing spreadsheet for Electrical and Instrumentation sizing like cables, glands, breakers etc.

• Successfully designed, installed and commissioned Fire Detection (addressable) & Suppression system in Sipitang tee-off metering station for Petronas.

• Worked as an Inspection engineer under QAQC dept. for UPS-Battery system, Cables, Metering panel, glands, trays in MSOG, Malaysia.

• Initiated “Go meeting-online meeting tool” into engineering division to save cost of travel, time for PASIR GUDANG project-Misi Setia Oil & Gas.

• Explored and gain technical expertise in the field of Fire & Smoke detection system, Telecommunication, V-SAT systems, Cathodic Protection, PAGA system, CCTV.

• Implementation of Cost Reduction, Process Improvement and Energy Conservation Activities for project.

• Successfully optimized the engineering cost by considering alternative design & selection which fits to all norms of PTS codes & standards in Misi Setia Oil & Gas (MSOG), Malaysia.Reduced cost of RM 50,000 for AC UPS System by providing alternative to battery advance monitoring system. Job Experience:

1. Detail Design engineering experience (10.5 years) a. Preparation of MR,TBA & PR for following items

• Pressure gauges, Temperature gauges, Level gauge

• Safety Relief valves, Control Valves (Globe type),ON/OFF Ball valves & Diaphragm valves

• Resistance thermometer & Temp.transmitters, Pressure transmitters with DP type level transmitters, Mass Flow meter, Ultrasonic flow meters, Analyzers, GC etc.

• LV switchgear, Distribution boards, Cables, AC-DC UPS system with battery SANDEEP POPAT WALUNJ

E-mail: acyoi1@r.postjobfree.com,Mob:+91-773*******,773-***-****(INDIA), +601********(Malaysia) LinkedIn ID : Er. SANDEEP WALUNJ, Skype ID : sandeepwalunj108 3 of 4

• Instrument air manifolds, JB & cable glands, Pressure Reducing Station, Vibrating level Switches

• pH & conductivity meters for water treatment plants b. Preparation & supervision for preparation of following drawings.

• Instrument and junction box location drawings.

• Cable tray routine drawings. JB wiring and interconnection drawings.

• Electrical and instrumentation interfacing drawing.

• Process hook up & pneumatic hook up drawings

c. Preparation of following documents.

• Instrument index, Cable schedule, JB schedule, Instrument signal loop diagrams, I/O list,

• Cause & Effects Diagram, Functional Logic Diagram

• Instrument Design Basis, Datasheets, Specifications d. Sizing calculation for CV, orifice plates & PSV using Instrucalc software. Have done Control Valve sizing on FISHER Firstvue, Safety Valve sizing on Crosby, LESER, Orifice plate sizing on Flowel 4.0. e. Sizing and selection of UPS system c/w battery sizing f. Preparation of Bulk MTO for cable trays, main cables, branch cables, cable glands, junction boxes, tube fittings, structural steel, air manifolds, for cost estimation. g. Documentation with Smart Plant Instrumentation (INTOOLS 7.0). Worked on different modules of SPI IN-tools like: wiring module, Specification module, calculation module, loop-drawing-module. h. To support head design office by providing required information from site by technical site visit. i. To answer all Technical Queries raised by client & their contractors. j. Participation in Pre FAT, FAT & SAT activities. k. As a Lead E&I for various EPCC project, clearing technical queries of contractor, reviewing, commenting & approving detail engineering documents of EPC contractor & OEM. l. Well conversant in hazardous area classification as per IP15,4th edition & international standards like API,ISA,ANSI/ASME & IEC, NFPA, ISA, IS codes, PETRONAS PTS specifications etc. m. Understanding of various Process, Mechanical & Electrical deliverables like P&ID, Equipment layouts, Piping Isometric, process flow sheets & Electrical drawings like MCC, power distribution & SLDs etc. n. Experience in Proposal Engineering, purchase Engineering, Tendering & BID Evaluation, cost estimation.&.Negotiation-etc.

2. Construction experience (3.8 years)

a. Technical adviser on sites for subcontractors, Expert in Client interface through meetings, discussions, progress reports, presentation etc.

b. Planning, organizing site daily activities to achieve deadlines, Quality control & Health & safety matter handlings on site. Day to day E&I activity guidance to team with toolbox talk. c. Calibration of smart transmitters with HART communicator & control valve positioners & Stroke checking of control valves. Calibration of instruments like transmitters, control valves, PSV’s etc. d. Instrument Loop checking, Instrument air piping leak test. e. System wise checklist preparation & checking of attended points by contractor. f. Supervision on following activities:

Cable tray & duct laying, cable laying, JB installation, Cable termination. Instrument installation- Pressure transmitters, DP transmitters, Flow transmitters, Level transmitters. Impulse piping & tubing for Pressure transmitters, DP transmitters, Flow transmitters, Level transmitters. g. As per site conditions if any changes required in layout drawings then that changes should incorporate by discussion with HO & other concerned disciplines. h. To clear doubts of clients & contractors regarding Design documents. Keep checking all site activities for quality work & safe work.As Site Engineer for some reputed sites, was responsible for commissioning of BMS (Burner Management System), Fieldbus network-instrumentation system, HART management System, SWAS (Steam & Water Analysis) system, Flow metering skids, PLC/DCS systems.

i. Power and signal connections for analyzers, fast loop pumps and sample handling system. MCC Panel termination. Point building in DCS for Control valves, Transmitters. SANDEEP POPAT WALUNJ

E-mail: acyoi1@r.postjobfree.com,Mob:+91-773*******,773-***-****(INDIA), +601********(Malaysia) LinkedIn ID : Er. SANDEEP WALUNJ, Skype ID : sandeepwalunj108 4 of 4

3. Other experience

a. Servicing of Pressure Transmitters, DP Transmitters, Positioners (Siemens) using SIMATIC PDM, HART Communicator.Configuration of Pressure transmitters, DP transmitters, Positioners using SIMATIC PDM, HART Communicator. Preparation of P&I diagram in Auto Cad. b. Allen Bradley PLC MicroLogix 1000/ Controllogix programming. Ash handling system project for Reliance ADA. Honeywell HC900 mini DCS & Specview 32 SCADA programming for Mill and boiler controls.

c. Selection of PLC as per plants requirements. PLC installation and commissioning, Training faculty for PLC. Familiar with Schneider M340 PLC. Hands on experience on Specview 32 SCADA Software. d. Selection, Installation and Commissioning of PLC /DCS modules and cards. e. Setting up and developing the training and project division in Pune. Marketing and implementing projects. Also marketing of Training Division.

f. Teaching technical subjects to 3rd year & final year students, subjects like Process Instrumentation & Control I & II, Principles of Electronic Instrumentation, Control System Components & Basic Control Systems.

g. Maintenance and troubleshooting of all pneumatic and electronic equipments like I to P and P to I Converters, Data loggers, Smart Transmitters, Orifice Plates etc. h. ISO 9001:2015 and OHSAS 18001:2007 Certification Audit assistance at Misi Setia Oil & Gas. Employers & projects handled

Design Experience

Sr.

No.

Company Name Job Position Duration

Experience

1 M/s MISI SETIA OIL AND GAS SDN

BHD., Malaysia –Current company

Lead Electrical & control

Instrumentation Engineer – Grade 6

May 2013 - till date

3.9 Yrs.

2 M/s ROLTA INDIA LTD., Mumbai Lead Design Instrumentation & control Engineer L1-

Feb 2012 - Apr 2013

1.2 Yr.

3 M/s Creative Ashtech Power projects

(P) Ltd.(ADA-Reliance group

companies), Pune

HOD –Instrumentation Dept. June 2010 - Jan 2012

1.7 Yr.

4 M/s THERMAX INDIA LTD., PUNE Executive -Instrumentation Oct.2007 - June2010 2.8 yr. 5 M/s SPA INSTRUMENTS (I) PVT. LTD.

(ISO-9001) Pune

Senior Instrumentation /DCS Engineer Sep 2006 - Oct 2007 1.1 Yr.

Construction/Commissioning/O&M Experience

6 M/s PROCECA ENGG & AUTOMATION

SERVICES Pvt. Ltd. Pune

Senior Project Engineer MAR 2005 - JUN 2006

1 .3Yr.

7 M/s COLGATE-PALMOLIVE (I) Ltd.

Mumbai

Instrumentation Engineer JAN 2004 - JAN 2005

1 Yr

8 M/s AKASH ENGG. SERVICES. Mumbai Instrumentation Engineer AUG 2002 - JAN 2004 1.5 yrs. Personal Details:

Date of Birth OCTOBER 29, 1980

Contact Numbers Malaysia :- +60-14-329****; India :- +91-773******* Present Address 110,Taman Desa Seroja,Jalan Reko,Kajang-43000 Permanent Address E34,Shivtirtha nagar apt.,kalewadi-411018 Passport Number / Date of Expiry K6356600 / Jan 2022 Current Salary Basic : RM 15000/- PM +Transportation : RM 500 + accommodation : RM 1300 + Medical allowance RM 200 PM + overtime(if applicable) Total : RM 17000

Notice Period before joining 30 days

Contact this candidate