NELSON L. ADLAWAN

Block ** Lot ** Area F, Purok *1, Sapang Palay,CSJDM, Bulacan

Mobile Number : +639********* / +639*********

Email Add : acyo27@r.postjobfree.com

Objectives :

To perform with the best of my knowledge and ability to do all the tasks assigned to me by the company, and to seek a challenging position as an instrument technician within a progressive.

Personal Data

Sex : Male

Age : 49 years old

Date of Birth : April 28, 1967

Height / Weight : 5’5 ” / 147 lbs.

Citizenship : Filipino

Educational Attainment

Technical Course : Electronics Computer Technician

Guzman Institute of Electronics & Technology

509 Z.P de Guzman Street

Quiapo,Manila,Philippines

1990-1992

University School : Cebu Institute of Technology

Course : Bachelor of Science in Electrical Engineering

N Bacalso Ave. Cebu City

1985-1987

Employment Record

Electrician / Instrument : Freelance Work

Technician Manila,Philippines

July 10,2014 – Up to Present

Client’s Name

Residential Electrician ( Contract )

Scope of Work

Perform physically demanding tasks, such as digging trenches to lay conduit and moving and lifting heavy objects. Provide preliminary sketches and cost estimates for materials and services.

Place conduit (pipes or tubing) inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.

Fasten small metal or plastic boxes to walls to house electrical switches or outlets.

Install circuit breaker for the all connection of the wirings.

Client’s Name

Bulacan Cement Plant ( Instrument Technician/ Contract )

Barrio Minuyan, Norzagaray, Bulacan, Philippines

March 01,2016 – May 30,2016

Scope of Work

Performs limited repairs and calibration of most control valves, actuators, positioners and in-line pressure regulators following established written procedures. Operates and maintains a variety of test equipment using established written procedures. Uses computerized equipment and software to perform limited testing and troubleshooting procedures.

Tests equipment using checklist, repair manual and standard operating parameters and diagnosis and replace damaged or malfunction equipment in the field.

Perform instrument modifications/project and shutdown work as required by superior and reports progress to the superior as agreed.

Maintains detailed records and prepares reports on plant shutdown activities and the condition of equipment.

Ensures HSE issues are given primary consideration in all activities undertaken within area of responsibility and perform each job assignments according to safety rules/standards.

Instrument Commissioning : Kentz ( Engineers & Constructors )

Technician Offshore Project Doha, Qatar

October 18, 2013 – June 02,2014

Instrument Comm.Technician / : Kentz ( Engineers & Constructors )

Punchlist Coordinator Onshore Project Ulsan, Korea

May 25, 2013 – August 24, 2013

Client’s Name

Rasgas Barzan Platforms WHP1, 2 & 3, Onshore and Offshore

Scope of Work

Ensure that all instrument installation are established on standard procedure as per quality plan.Check standards/specification according to client’s requirements.Preparation of daily and weekly instrument work reports.

Pre commissioning activities loop checking and loop test for final acceptance of the client for all process instrument in the MCC.

Inspection of all installed instrument in area from construction turnover to commissioning.Perform simulation of Transmitters Rosemount & Honeywell. Loop test PLC & DCS and functional test.

Making Loop folder for pre-commissioning and commissioning.

Closing and Signing off Punchlist for instrument and sign it offby the client for commissioning.

Preparing for internal inspection regarding instrumentation works and punch listing.

Troubleshooting during pre-commissioning and commissioning activity of packages.

Conduct SAT all vendor panels Remote I/O cabinets.

Assists Fire & Gas Vendor in start-up and commissioning of the system and simulation of H2S Detectors & Flame Detectors.

Assists Instrument Air Vendor in commissioning and Running Test Procedure for acceptance of the client.

Simulation of Pressure Transmitters using Druck DPI 610 pressure calibrator and Druck DPI 401 high pressure hand pump.Also Fluke 707 loop calibrator.

Assits ( HIPPS ) High Integrity Pressure Protection System and ( HPU ) Hydraulic Panel Unit Vendor in commissioning and Running Test Procedure ( RTP ).

Instrument / Electrical : Koniambo Nickel SAS

Comm. Technician Vavouto,New Caledonia

November 11, 2011 – December 31,2012

Client’s Name

Koniambo Nickel Project ( Mining )

Scope of Work

Familiarizes with the project drawings, pre-op testing and commissioning procedures, and vendor commissioning manuals. Involved inspection for safely taking the plant from a state Construction Completion, through Pre-operational Testing, Commissioning, and then handover to Operations for start-up.

Perform simulation of Transmitters and Valves such as Rosemount,Krohne,Endress + Hauser,Yokogawa,Fisher,Masoneilan.Loop checking of all kinds of field instruments back to PLC or DCS,functional test and hands on experience in handling various Instrument calibrators,simulators and 475 Hart communicator,Fluke 718 EX100G pressure calibrator,Fluke 754 documenting process calibrator.

Work in Area 500-Utilities & Common includes the following Facilities:

Sea Water Intake, Cooling Towers, Instrument Air Generation, Fire Water, Demin Water & Potable Water, Fuel Oil Storage & Distribution, Gas Plant Nitrogen and Oxygene Distribution, Waste Water Treatment.

Performs preventive and corrective maintenance on most plant electrical, instrument, and control system devices using established written procedures.

Interprets technical drawings and procedures to aid in limited troubleshooting and repair of most electrical, instrument and control system equipment.

Performs limited repairs and calibration of most control valves, actuators, positioners and in-line pressure regulators following established written procedures. Operates and maintains a variety of test equipment using established written procedures. Uses computerized equipment and software to perform limited testing and troubleshooting procedures.

Assembles and tests experimental switch panels, solenoids, and other electrical equipment and components. Assist in modification of electrical prototypes to correct functional deviations under direction of Electrical Engineer. Diagnose cause of electrical or mechanical malfunction or failure of operational equipment and performs preventative and corrective maintenance. Reviews and updates loop diagrams and specification sheets as required.

Instrument Commissioning : SHERRITT ( AMBATOVY )

Technician Ambatovy Cobalt & Nickel Project ( Mining )

Tamatave,Madagascar,Africa

November 24, 2010 – March 07,2011

Client’s Name

Ambatovy Cobalt & Nickel Project ( Mining )

Scope of Work

Inspection of all installed instrument in area from construction turnover to commissioning.Perform simulation of Transmitters Rosemount,Krohne,Endress + Hauser,Yokogawa. Loop test PLC & DCS and functional test.

Pre-commissioning and Commissioning of area (3100) Slurry Thickening & Storage,area (3200) Ore Leach Circuit,area (6600) Air Separation Plant,area (7200) Demineralized Water Plant.

Ensure that all instrument installation are established on standard procedure as per quality plan.Check standards/specification according to client’s requirements.Preparation of daily and weekly instrument work reports.

Maintains daily routine check-up for every operating machine

Checks on machine temperature condition on stable mode

Checks on daily record of machines progress report such as daily output

made.

Supports the senior maintenance engineer in troubleshooting machine out

of order mode.

Coordinate with the supervisors daily handover record to the company

during inventory period.

Assist in the development of company thru machines repair, modification

and or upgrade application.

Providing timely and effective maintenance and advising technical support

in maintaining and operation.

Assembles and tests experimental switch panels, solenoids, and other instrument equipment and components. Assist in modification of instrument prototypes to correct functional deviations under direction of Instrument Engineer. Diagnose cause of electrical or mechanical malfunction or failure of operational equipment and performs preventative and corrective maintenance. Reviews and updates loop diagrams and specification sheets as required.

Lead Instrument Technician : KENTZ ( Engineers & Constructors )

& Document Controller Sakhalin Energy Investment Company

Booster 2 Station ( Gastello Project )

Sakhalin Island, Russia

July 15,2009 – November 30,2009

Client’s Name

Sakhalin Energy Investment Company, Booster 2 Station ( Gastello Project )

Scope of Work

Start-up and commissioning and trouble shoot auxiliaries, instruments and the whole system for their 2-Units RR-30 MW Gas Generator Turbines.( Rolls Royce )

Working Fire & Gas for start-up and commissioning of the system at Power Generation Area and Lube Oil Area.

Performs loop checking of instruments from field to Central Control Room, Programmable Logic Circuit Panel and Emergency Shutdown System, using Hart 475 Field bus Communicator, loop Validator, loop checking of various types of control valves (Diaphragm and actuator type) stroking. Calibration of all types of transmitters using various types of equipments such as RTD Calibrator, Decade box, and Hart communicator and hand pump.

Involve in commissioning & initial start-up of the whole instrumentation system.

Preparation of all drawings and plans before performing any inspection such as

single line diagram, location plot/plan, hook- up drawings, JB/panel termination diagram, data sheets and P&ID ( piping and instrument diagram ) . Check standards/specification according to client’s requirements.

Preparation of E&I MCR’s ( mechanical completion records )

Instrument Technician : BETS B.V. (Bechtel-Enka Technostroyexport)

& Completion Engr. Sakhalin Energy Investment Company

Onshore Processing Facilities ( OPF II )

Sakhalin Island, Russia

April 24, 2006 – January 31,2009

Client’s Name

Sakhalin Energy Investment Company, Onshore Processing Facilities ( OPF II )

Scope of Work

Check standards/specification according to client’s requirements, preparing BETS/SEIC QC internal punchlist.

Perform & prepare puchlist during 3 party walkdown with construction,

commissioning,and operations group.

Preparation of all drawings and plans before performing any inspection such as

single line diagram, location plot/plan, hook- up drawings, JB/panel termination diagram,data sheets and P&ID ( process and instrument diagram )

Involve in commissioning & initial start-up of the whole instrumentation system.

Assists Fire & Gas Vendor in start-up and commissioning of the system at Power Generation Area.

Start-up and commissioning and trouble shoot auxiliaries, instruments and the whole system as well as per supervision from Hitachi for their 4-Units H25 Gas Turbines Generator ( 29MW ).

Perform loop checking and final loop selling to the client as per Engineer / Supervisor schedule. Performing calibration of all types of transmitter on field. Configuration setting on the other types and models instrument.

Study and analyzed the lay-out details of process and instrument diagrams (P & ID) and contract drawings before installation.

Performs loop checking of instruments from field to Central Control Room, Programmable Logic Circuit Panel and Emergency Shutdown System, using Hart 475 Field bus Communicator, loop Validator, loop checking of various types of control valves (Diaphragm and actuator type) stroking. Calibration of all types of transmitters using various types of equipments such as RTD Calibrator, Decade box, and Hart communicator and hand pump.

Instrument / Electrical : HYUNDAI ENGINEERING AND CO. LTD.

Technician South of Marza El-Brega, Benghazi, Libya

April 29, 2004 – May 01, 2005

Client’s Name

ATTAHADDY GAS PLANT

Scope of Work

Calibration of instrument, pressure, flow, level, temperature transmitter, level switch, control valve.

Termination of cable from the instrument to the marshalling cabinet, loop checking.

Pre-commissioning and Commissioning

Assist the vendor to the water treatment operation.

Trouble shooting of instrument, control valve, M.O.V, S.D.V., B.D.V.

Conduct loop check from field instrument to DCS and PLC, assigned in commissioning team in train 4 and 5 which include Propane and Mixed Refrigerant Compressor (NUOVO PIGNONE).

Perform immediate field calibration of process instruments. Wire check from the field to control room.

Conduct loop checking from field instrument to control room at DCS (Foxboro) and PLC (Allen Bradley). Installation of instruments as per standard installation.

Preparation of daily and weekly electrical work reports.ensure that all electrical installation are established on standard procedure as per quality plan.

Attend daily toolbox talk meeting with electrical work force to ensure good HSE on jobsite.Termination of cables from motor control center and field side.

Lay-out and installation of electrical raceways and conduits as per engineering plan and specifications.

Vendor assist on loop checking on gas turbine generators,lube oil cooler fans,lube oil pumps,ventilating pumps,etc.

Instrument Technician : ALI H. AL-GHAMDI EST

P.O. Box #75, Rahima Rastanura 3194 K.S.A.

November 11, 2001 – November 15, 2003

Client’s Name

A.) QUARAYAH POWER PLANT SCECO

Scope of Work

Perform related testing on the instrument such as: calibration and functional testing

Calibration of all gauges such as: Temperature gauge and pressure gauge

Level switch testing and installation

Air damper stroking and overhauling, Fuel gun Retracting

Perform sequence test. Assigned in shutdown team plant-wide which includes compressor, trains, boiler.

Calibrate plant-wide instruments and conduct field inspection for installation of instruments, impulse line and air line, termination of instrument cable. Perform immediate troubleshooting, repair, calibration and installation of process instruments.

Client’s Name

B.) SAUDI ARAMCO BULK PLANT (RIYADH)

Scope of Work

Termination of instrument cable from marshalling cabinet to field panel, primary and secondary cable.

Installation of electrical equipment, pump house II and III in refueling system, motor, control breaker, substation, compressor, etc.

Megger test of supply cable MCC to MDP. Carry out maintenance of instrument facilities

Calibration of all gauges such as: Temperature gauge and pressure gauge

Level switch testing and installation

Air damper stroking and overhauling,fuel gun retracting.

Check physically and visually the instrument before start calibration

Calibrate pneumatic and electronic instruments.

Instrument / Electrical : AL-HAMMAM COMPANY

Technician P.O. Box #230, Rahima Rastanura, 31941 K.S.A.

November 1, 1998 – July 30, 2001

Client’s Name

A.)SAUDI ARAMCO (SOUTH RIYADH BULK PLANT) MODERNIZATION PROJECT

Scope of work

Check instrument connection

Calibrate instrument as per given on the data sheet.

Installation of UPS, ESD, and DCS panel

Cable pulling/cable laying, including loop checking and termination of cable.

Grounding, cad welding,conduiting, Cable tray laying

Conduct pre-commissioning work up to project commissioning.

Client’s Name

B.)SAUDI ARAMCO RIYADH REFINERY (JET FUEL MODIFICATION SYSTEM)

Scope of Work

Calibration of emergency isolation valves, control panel and tubing.

Installation of instrument air line supply

Conduiting and cable pulling,Cable dressing and termination

Calibration of pneumatic and electronic instruments, pressure flow, temperature, level and control valves.

Conduct pre-commissioning activities up to project commissioning

Client’s Name

C.) SAUDI ARAMCO RIYADH REFINERY (COOLING TOWER UP GRADE SYSTEM)

Scope of Work

Set up and calibrate instrument as per instrument data sheet.

Cable termination and continuity check,loop checking

Conduct a pre-commissioning activity,perform commissioning activities.

Distribute work schedule such as cable pulling,cable tray and junction boxes installation,cable glanding and termination.

Performing cable line continuity test,insulation resistance test.

Troubleshoot of instrument, control valve, M.O.V., S.D.V., B.D.V.

Client’s Name

D.) SALINE WATER CONVERSION CORPORATION (S.W.C.C.)

Scope of Work

Erection and installation of gas insulated breaker (G.I.B.) and gas insulated switchgear (G.I.S.).

Installation of cable tray, ladder type

Installation of control panel board and accessories including termination and loop checking.

Cable pulling/cable laying, termination and loop checking.

Pre-commissioning & Commissioning

Assist the Vendor to the water treatment operation.

Seminars / Training Attended

Saudi Aramco Work Permit-Kingdom of Saudi Arabia

Integrated Safe System of Work( ISSOW ) -OPF-Sakhalin II Project Russia

Electrical Installation Operation Safety,Training Confined Spaced & Work at Height.

Personal Safety and Social Responsibility (PSSR)

OPF Hazardous Area’s Familiarization Workshop On Explosion Proof E & I Equipment and Termination Installed at the OPF Project ( Russia ).

Electrical & Instrumentation Level 4 ( RTN – Russia )

Basic Offshore Safety Induction & Emergency Training ( BOSIET ).

References:

-Emai add- -Position-

1.Russell Stephenson- acyo27@r.postjobfree.com – Comm. Manager

in Korea / Qatar

2.Kiran Patel - acyo27@r.postjobfree.com – Instr.Engr./Supervisor

in New Caledonia

Contact this candidate