HENRY BELLEN BO

E&I site engineer/supervisor/inspector

CompEx Certificate No.34518

Contact:

+639*********

acynhx@r.postjobfree.com

acynhx@r.postjobfree.com

QUALIFICATION

E&I engineer (PMT-E&C), E&I Workpack engineer( HUC), E&I Supervisor, E&I/Ex inspector

Computer skills & familiar with electro-mechanical, hydraulics, pneumatics & HVAC.

Can work independently or within a team to complete the job correctly & safely as schedule.

SYNOPSIS OF WORK EXPERIENCE

Project management experience on Oil and Gas for Onshore / Offshore construction works involving Electrical and Instrumentation, Supervision/Inspection on Fabrication, Installation, Hook Up and Commissioning of Central Processing Platforms, Satellites, FPSO, Turret, MOAB : Mobile Offshore Application Barge, TLP, Semi-FPS and Drilling Platforms. Involves in the general review of scope of work, preparation of project schedule, man-hour estimates, material take off and progress reporting. Preparation of workpack for hook-up, commissioning and maintenance work. Prepare commissioning scope of work & relevant check sheets overview.

WORK HISTORY

29 June 2015 to 10 October 2015

Company: SBM OFFSHORE

Keppel Shipyard (Tuas) Singapore

Position: Sr. F & G Commissioning Technician /inspecton

Project: FPSO TURRITELLA

Responsibilities:

Review all the commissioning procedures for the F&G commissioning activities. Assist in the establishment of a commissioning plan for the discipline and ensure integration into the Project execution plan.

Review and define the testing and commissioning scope, planning and man-hour estimates required to complete the scope of work.

Review of all certification and documentation to ensure validity and compliance with specifications, drawings, manufacturing and inspection test plans.

Expedite installation of Fire and Gas devices, Junction Boxes, Panels, Cable pulling, etc.

Coordinate with the contractor field supervisor for the final location of Fire and Gas devices.

Verify/inspect all completed installation as per MC application and prepare punch list for contractor to rectify.

Monitor and on acceptance execute outstanding punch list items.

Carry out all the commissioning activities for F&G and complete the Commissioning check sheets

01 April 2013 to 07 February 2015

Company: SHELL PHILIPPINES EXPLORATION B.V.6

Keppel Subic Yard

Position: E&I /Ex Inspector (Shell construction site team)

Project: DEPLETION COMPRESSION MODULE (DCP)

MALAMPAYA PHASE 3 PROJECT

Responsibilities:

Ensure that all required inspections, verifications and audits performed during the installation and termination of E&I equipment, site instrumentation, functional loops checks are performed and witnessed on all instrumentation wiring and tubing systems. Schematic and logic programming of the Instrument Systems are in compliance with the project technical and safety codes, specifications and procedures. Ensure that work is carried out in accordance with AFC drawings, specifications, DEP, Regulations and as per approved project ITP.

Actively involved with all aspects of safety, ensuring the work areas are maintained in a safe condition and Shell 12 Life Saving rules are adhered to comprehensively.

Attend and actively participate in Safety Walks; Stand downs, Meetings, Tool Box talks, pre start Step Back 5X5. Permit related JSA and JHA and regularly complete / submit Safety Observation Cards.

Verify Contractor and subcontractor quality and safety qualification audits with recommendation for approval.

Provide coverage for E & I, F&G, PAGA, Telecommunication & HVAC inspection duties when required or as directed by the CA and E & I Engineers.

Ensure E & I work is completed in compliance with project safety policies and procedures.

Monitor and report weekly work schedules for proper level of detail to ensure expeditious progress in E & I tasks recognizing the critical path of the master schedule.

Establish close communication and teamwork with other disciplines to ensure overall successful completion.

Ensure proper custody transfer of Company supplied equipment and Contractor supplied Equipment to the yard warehouse and that they are received, identified, handled, preserved and cared for before and after installation.

Carry out material inspection at warehouse, checked as per requisition and specification and prepare punch list for action by contractor.

Check Material certificates, Hazardous Equipment certificates and calibration certificates.

Carry out field inspection of cable supports, ensure that the cable supporting infrastructure is complete (prior to pulling cables) and as per AFC drawings, Cable Laying inspection, ensure that the cables are correctly installed to their final destination and cable ends are protected from moisture ingress.

Carry out inspection of in-line instruments witness impulse-line pressure testing, point to point wiring checks, earthing integrity tests, field junction box inspection, instrument cabinet inspection, check on the straight length requirements for flow meters, instrument accessibility, inspection of process connections, ensuring that welding activities shall not affect the electronic instruments already installed.Witness electrical continuity, insulation resistance test, conductivity & earth resistance test, protection relay test, instrument calibrations, pop test of PSV & loop testing.

Witnessed the functional test of the E & I equipment, motors, generators, switchgear, etc. and record all reading for reference as per commissioning procedures and sign the completed report which compiled by Testing and Commissioning Team.

Prepare punch list relative to the inspection, giving full description of nonconforming item or condition, and re-inspect after rectification is completed. Verify/sign MC check sheet, ITR “A” .

Carry out the verification of the Ex Components for vendor packages as per Ex register, Ex Check sheets, Certificate of conformity, equipment or package datasheets in compliance to IEC 60079-14 & IEC 60079-17. If during the course of verification for any components which should be Ex rated and is not listed in the Ex register, it shall be added to the register.

Ensure that the register/certificates/datasheets are signed off indicating that all required Ex components has been verified sufficiently. Carry out verification of Ex field components (All Ex components outside of skid packages) -electrical/instrument / F & G /Telecom as per Hazardous Area Certificate and Data sheets, AFC drawings, and signed off Ex ITR”A” Check sheet in compliance to IEC 60079-14 & IEC 60079-17

Produce daily reports of inspection carried out on the site.

Document and communicate Lessons Learned in all above

26 March 2012 to 31 November 2012

Company: DAEWOO-GERMANISCHER LLYOD

HHI Yard (Hyundai Heavy Industry)

Ulsan, South Korea

Position: Sr. Instrument Inspector (Independent Verification Body)

Project: SHWE FIELD DEVELOPMENT PROJECT

Responsibilities

Ensure adherence to contract documents, including drawings, specifications, approved ITPs and procedures for the installation, testing, and commissioning.

Monitor the project schedule and proactive in identification of any activities that could impact the planning / progress reporting.

Verify certification of instrument materials and equipment for area / zone classification.

Support the efforts on maintenance and preservation of E&I equipment at the construction site. Review construction documentation for completeness and correctness.

Ensure and witness instrumentation system performance test, loop testing and components testing.

Assist with resolution of Contractor’s technical queries, non-conformances with concurrence from instrumentation and engineering site leads.

Verify Contractor and subcontractor quality and safety qualification audits with recommendation for approval.

Actively support coordination / progress meeting with agenda to facilitate meeting execution.

Oversee the preparation, tracking and completion of Contractor’s instrumentation punch list.

Document and communicate Lessons Learned in all above responsibilities.

11 Nov 2011 to 15 March 2012

Company: SBM OFFSHORE

Keppel Shipyard, Singapore

Position: Sr. F & G Commissioning Technician /inspector

Project: FPSO CIDADE DE PARATY Testing & Commissioning

16 Feb 2009 to 05 Nov.2011

Company: Malaysia Marine and Heavy Engineering SDN/BHD

Pasir Gudang, Johor Bahru, Malaysia

Position: Lead E & I Engineer (PMT/ E & C Division)

Project: Hull and Topside fabrication- GUMUSUT KAKAP Project, Semi-FPS

Sabah Shell Petroleum Company (SSPC).

Responsibilities:

Lead a team of engineers and supervisors in carrying out all installation activities with respect to Electrical and Instrumentation within budgeted man-hour and project schedules.

In-charge for the complete installation of E & I system, DCS, SDS, IPS, F &G, PAGA etc.

Participate in the development of scope of work of E & I activities. Participate in the preparation and development of scope of work for tender packages and technical evaluation of subcontractors and submitted tenders.

Make sure that the sub-contractors completely understand the scope of work and are technically competent to execute the work as per standard specifications and they have adequate resources to complete the work to the required MCD. Review project specifications, documents, drawings, data sheets & vendor manuals related to electrical / instrumentation systems.

Prepare / review material take-off of latest drawing issued by Client.

Coordinate with client regarding Engineering, Technical, Fabrication, Installation, Quality and Material deliveries.

Plan, organize and supervise E & I site installation activities.

Monitor and supervise day-to-day contractor activities and identify and implement corrective action as appropriate.

Provide technical support, coordination, inspection and testing of DCS/ESD/PLC /LV/MV Switch Gear installation/modifications.

Monitor Installation of major electrical equipment such as switchgears, MCC, generators, electrical motors, transformers etc.

Coordinates with” Testing and Commissioning team” regarding system priorities, tie-in points and ship loose items. Studies and interpret specification, piping and instrumentation diagram prior to installation.

Review hook-up and loop diagram. Review interface to incorporate on the termination drawing.

Review hook-up and pre-commissioning documentation and ensure completion prior to hand over. Highlighted design discrepancies and raised site technical queries.

Review “Red Line Marking” on IFC drawings for as “AS BUILT” regarding the site modification. Prepare calibration procedure for various instruments. Provide technical support when required to related engineering activities.

Prepare “Weekly Progress Reports” and submit to client for verification. Prepare project related reports and presentation as required and produce performance measurement tools to monitor sub-contractors and project performance.

Supervise, mentor, and train junior level PMT Engineer & Quality inspectors.

Attends and participates project related meetings as required.

Performs other related duties as assigned by the manager.

Document and communicate Lessons Learned in all above responsibilities.

Directs and participates in accidents investigation when require

15 August 2008 to 16 Nov. 2008

Company: SBM OFFSHORE

Keppel Shipyard, Singapore

Position: Sr. F & G Commissioning Technician /inspector

Project: FPSO Espirito Santo Testing & Commissioning-Shell (Brazil)

01Aug 2007 to 28 July 2008

Company: GERMANISCHER LLYOD - TALISMAN MALAYSIA LIMITED

PTSC Yard, Vung Tau, Vietnam

Position: Sr. E & I Engineer/Inspector

Project: FABRICATION, TESTING & COMMISSIONING OF BUNGA ORKID B/C/D, Talisman Malaysia Ltd

June 2006 to June 2007

Company: PETRA RESOURCES SDN. BHD

Miri, Sarawak,Malaysia

Position: E&I Engineer (HUC - Workpack Development)

Project: Offshore Construction, Hook-up, Commissioning and Maintenance

Sabah Shell Petroleum Company Limited (SSPC) / Sarawak Shell Berhad (SSB)

August 2005 to May 2006

Company : Malaysia Shipyard and Engineering Sdn. Bhd.

Position: Lead E& I Engineer (PMT/ E & C Division)

Project: KIKEH DTU TOPSIDE AND HULL PROJECT

Client : TECHNIP/MURPHY OIL

August 2004 to August 2005

Company : Malaysia Shipyard and Engineering Sdn. Bhd.

Position; E&I Engineer(PMT/ E & C Division)

Project ; South Angsi “A” (MOAB-2) Topsides Fabrication, Installation, testing & Comm.

Client : TALISMAN MALAYSIA LTD.

October 2003 to August 2004

Company : Malaysia Shipyard and Engineering Sdn. Bhd

Position Instrument Engineer(PMT/ E & C Division)

Project; KIZOMBA –B Drilling Rig Platform Fabrication

Client : EXXONMOBIL / PRIDE INTERNATIONAL

November 2002 to October 2003

Company : Malaysia Shipyard and Engineering Sdn. Bhd

Position Instrument Engineer(PMT/ E & C Division)

Project: MOAB – (Mobile Offshore Application barge) Hull Fabrication/Erection of FSO-Turret

Client : TALISMAN MALAYSIA LTD.

November 2001 to September 2002

Company : Malaysia Shipyard and Engineering Sdn. Bhd

Position Instrument Engineer(PMT/ E & C Division)

Project EPC OF BS –A WHRP PM3 PHASE 2 and 3 Development of BS-A & BR-B Wellhead Riser

Client TALISMAN MALAYSIA LTD

May 2000 to October 2001

Company : Malaysia Shipyard and Engineering Sdn. Bhd

Position Instrument Engineer(PMT/ E & C Division)

Project LARUT –A CPP TOPSIDES Construction & HUC

Client : EPMI (ESSO PRODUCTION MALAYSIA INC.)

October 1997 to April 2000

Company: Engineering Equipment Inc. Philippines

Position E&I Inspector

Project Mauban Thermal Power Plant Construction Testing & Commissioning

May 1991 to Jun 1997

Company: HUGHES AIRCRAFT SYSTEM INT’L

Riyadh, K.S.A.

Position E&I Supervisor

Project OPERATION & MAINTENANCE Sector Command Center/Sector Operation Center-

Royal Saudi Air Force

December 1985 to March 1991

Company: RETSER ENGINEERING (RETSEA)

Taif, KSA

Position E&I Supervisor

Project FABRICATION, TESTING AND COMMISSIONG LONG RANGE RADAR FACILITIES,RSAF

June 1982 to Sept. 1985.

Company: CAPITOL INDUSTRIAL CONSTRUCTION GROUP

Cainta, Rizal, Philippines

Position Maintenance engineer (E & I)

TRAINING ATTENDED:

Hazardous Areas Comp’Ex’ Competence Based Course ( E&I )

17-21 December 2012 (Certificate No.34518)

Assets Training & Technical Services Pte Ltd

Singapore

Shipyard Safety Induction Course For Workers (General Trade)

NTUC Learning Hub, Singapore

CENTRAL CONTROL & MONITORING SYSTEM/ SCADA (CCMS)

Johnson Controls, Riyadh, KSA

AUTOMATIC TEMPERATURE CONTROL SYSTEM

HVAC OPERATION AND MAINTENANCE”

AJB High Tech LTD, Al Kharj, KSA

ELECTRO DIALYSIS REVERSAL SYSTEM (WATER TREAMENT)

IONICS INCORPORATED, AL Khobar, KSA

COMMUNICATION SITE FACILITIES OPERATION & MAINTENANCE

BES ENGINEERING, Riyadh, KSA

INDUSTRIAL ELECTRICITY & MOTOR CONTROL

REFRIGERATION & AIRCONDITIONING

DIESEL MECHANIC

Guzman Institute of Technology, Manila, Phil.

PROGRAMMING FUNDAMENTAL

ELECTRONIC DATA PROCESSING

INTRO TO MICROCOMPUTER

Bicol University, Legazpi city, Phil

PROFILE PERSONAL:

NAME HENRY BELLEN. BO

Home Address 16-9 Panay Avenue, Brgy. Paligsahan, Quezon City, Philippines

E- mail acynhx@r.postjobfree.com

acynhx@r.postjobfree.com

Birthdate 7 May 1959

Birth Place J. Panganiban, Camarines Norte, Philippines

Nationality Filipino

Religion Christian

Educational Attainment B.S. Engineering Bicol (State) University – 1981

Computer Skills “Microsoft office-Excel, Ms word, Power Point

REFERENCES

EDGARDO REMO Lead QA/QC- Malampaya project Phase 3

+639********* Shell Philippine Exploration B.V

acynhx@r.postjobfree.com

LARRY TALE GOMEZ Instrument Commissioning Engineer

+658******* Bumi Armada

acynhx@r.postjobfree.com

WILFREDO MENDAROS Cost Engineer

+601******** Malaysia Marine & Heavy Engineering

acynhx@r.postjobfree.com

Contact this candidate