Danilo Arquiano Bustamante
Winnipeg, Manitoba R2R 0J4
Home Phone 204-***-****
Cellphone 204-***-****
*********@*****.**
HIGHLIGHTS OF QUALIFICATION
Red Seal Truck & Transport Mechanic No. G-24-00736 Safety Inspection Mechanic No. M7005
Specialization in Diesel Engines
Overseas experience in Saudi Arabia, Saipan, Guam and United Arab Emirates RELEVANT EXPERIENCE AND ACCOMPLISHMENTS
Kindersley Transport Limited November 13, 2012 to present 1991 Brookside Boulevard
P.O. Box 51069
Tyndall Park P.O.
Winnipeg, MB R2X 3C6
Journeyman Truck and Transport Mechanic
• Performs Manitoba government safety inspection
• Maintains and repairs company trucks, tractors and trailers
• Overhauls different kinds of engines such as ISX Cummins, Mercedes Benz MBE 4000, Caterpillar C-13, Detroit Diesel Serices 60, DD15 and Paccar
• Performs engine checks and replace clutches, steering components, brake system - air and hydraulic
• Using laptop computer to diagnose fault codes like check engine, emission, ABS, check and repair electronic and electrical system, heating and air-conditioning.
• Maintains/repairs company forklifts such as Hyundai, TCM, Toyota and Nissan.
• Performs forklift engine overhauls, differential transmission, brakes, troubleshooting of electrical and hydraulic system.
• Performs welding using mig and gas welders.
• Prepares parts requisition and orders as well as work accomplishment reports using shop bay computers.
Beaver Truck Centre (VOLVO) August 15, 2011 to November 11, 2012 33 Oak Point Hi-way
Winnipeg, MB R2R 0T8
Truck Transport Mechanic
• Performed Manitoba Government Safety inspections.
• Performed troubleshooting / repairing of electrical harnesses. Adjusted breaks and clutches in specific clearances. Changed clutches pack kit.
• Performed pre-delivery inspections of new trucks, checks fault codes, updates programs using computer.
• Performed complete services.
Ram Winn Diesel Inc. June 15, 2011 to August 10, 2011 2165 Brookside Blvd.
Winnipeg, MB R3C 2E6
Truck Transport Mechanic
• Performed Manitoba Government Safety inspections.
• Performed complete services.
Paramount Truck Lines February 09, 2009 to June 02, 2011 1200 Fife St. Winnipeg, MB, Canada
Truck and Transport Mechanic
• Performed Manitoba Government Safety inspections of trucks, tractors and semi-trailers.
• Overhauled Cummins and Mercedes Engines.
• Performed tune-ups/set ups of top end Cummins, Detroit and Mercedes Engines Benz and Volvo Engines.
• Performed wet services, electrical troubleshooting and repairs, diagnostic troubleshooting and repairs, check and repair of air/hydraulic brakes, replace hub seal and etc.
• Replaced clutch kit and differential, steering gear box, etc.
• Replaced broken leaf and air spring, repair fifth wheel. Direct Fleet Management May 07, 2008 to February 08, 2009 100 Higgins Ave. Winnipeg, MB, Canada
Truck and Transport Mechanic
• Performed Manitoba Government Safety inspection of Truck Tractors and Semi Trailers.
• Performed tune-up of Cummins, international engines, Caterpillar, Detroit, and Mercedes Benz Engines.
• Performed wet and dry services, electrical troubleshooting/repairs, checked and repaired air/hydraulic brakes, replaced wheel hub seal, slack adjusters, s-cam.
• Replaced/adjusted clutches and brakes in specific clearances. RIVLEY SALES & SERVICES May 17, 2005 to March 27, 2008 Swan River, Manitoba, Canada
Heavy Duty Mechanic
• Performed Manitoba Government Safety Inspection of Truck Tractors, Trailers and Buses.
• Performed engine overhauling, transmissions, differentials, steering gearboxes and brake boosters.
• Troubleshoot/ repair of electrical wirings, air brakes and hydraulic brake systems.
• Adjusted brakes and clutches in specific clearance.
• Replaced broken leaf springs, air bags, kingpins/bushings, tie rod ends, airpots and u-joints.
• Rebuilt and replaced fifth wheels.
• Carried out arcs and gas welding boxes.
• Repaired various type of vehicles.
• Prepared daily accomplishment reports.
Abu Dhabi Municipality June 1999 to April 2005
United Arab Emirates
Heavy Equipment Mechanic
• Performed preventive maintenance of city buses, trucks, tractors and trailers.
• Performed engine overhauling of famous brands like Cummins, Caterpillar, Iveco, Volvo, Nissan, Isuzu, Hino and Komatsu.
• Dismounted and rebuilt of Bulldozer under carriage, grader, backhoe, and payloader.
• Diagnosed and repaired of hydraulic system, cooling system.
• Diagnosed and repaired of hydraulic/mechanical cranes use for heavy lifting. Tonggi Trucking Service November 1996 to March 1999 Las Pinas, Philippines
Heavy Equipment Mechanic
• Performed daily preventive maintenance of dump trucks, payloader, backhoe and other machineries
• General overhauling of engine, transmission, differential, steering gearbox, break and electrical system
JJ Moving Service Inc. September 1995 to September 1996 Guam, USA
Heavy Equipment Mechanic
• Performed engine overhauling of Cummins and Caterpillar engines.
• Performed daily pre-trip inspections of company trucks, tractors, trailers and beach cleaning machines.
• Prepared canvass sheets, purchase orders and submit orders to owner for approval.
• Monitored daily operation of van deliveries from post office to airport and vice versa. Consolidated Transportation Service Inc. November 1994 to August 1995 Saipan CNMI
Diesel Mechanic
• Responsible for daily maintenance and general repair of company truck tractors and trailers.
• Responsible for gathering truck parts quotation and submit to the officer for approval. Home Improvement Center November 1990 to September 1994 Saipan CNMI
Diesel /Gas Mechanic
• Performed engine overhauling of Cummins, Caterpillar and Japanese/Korean brand engines.
• Responsible for daily maintenance and general repair of trucks, forklifts. Generators and other machineries.
• Responsible for gathering truck parts quotation and submit to the officer for approval. Engineering Equipment Inc. March 1988 to August 1990 Saudi Arabia Project
Heavy Duty Mechanic
• Assigned to different oil fields, desalination and power plants projects to maintain and general repair different kinds of machineries used at the construction of projects.
• Performed preventive maintenance and prepared daily accomplishment reports.
• Responsible for parts requested to the central garage and monitored parts inventory. R.S. Service and Trading Center April 1978 to October 1980 Manila, Philippines
Mechanic/Assembler
• Responsible for parts requested, estimated man hours to complete assembling Philippine model jeepneys.
• Performed fabrication of some accessories.
• Responsible for test drives of the assembled unit. Other Work Experience
• Heavy Equipment operator.
• Gas/Arc welder.
• Fabricator
SPECIAL SKILLS
• Repairing, overhauling, engine installations and alignments, inspections of machinery fuel, exhaust and engine control systems
• Troubleshooting and inspecting of equipment for detect faults and malfunctions to determine the extent of repairs required
• Outstanding team player, trustworthy and hardworking
• Efficient organization skills
• Ability to work independently in a fast pace environment with minimum supervision Training and Seminars
• TIMKEN - Heavy Truck Wheel End Training – November 16, 2011
• KOBELCO – Construction Machinery Wheel Loader LK 350Z-3 – February 8, 2000
• KOBELCO – Construction Machinery SK430 III – October 3, 2000
• FIAT HITACHI - New Motor Grader- G200 System operation testing adjusting – 18 October 1999
• CATERPILLAR- 633E Series II Wheel Tractor Scraper System Operation - Testing and Adjusting – September 25 to 29, 1999.
• EXECUTIVE TECHICAL CONSULTANTS (Trade Test and Training Center Inc.) Heavy Equipment Mechanic (class B+) – October 19, 1998 Vocational Education
• Automotive Mechanics (Home Study Program)– Guzman Institute of Technology, August 1992
• Automotive Mechanics (Diploma 4-year secondary Trade Curriculum) – Camarines Sur National College of Arts and Trades - Naga City, April 1978 Character References
1. Bob Chodachek
Work No. 204- 697 0189
Home No. 204-***-****
2. Abey Solomon
Mob No. 204 – 998 3355
3. Clyde Taylor
Mob No. 204-***-****
Home No. 204-***-****