Marc (Moien) Louzon

**** ****** ******

Fort Worth, TX 76106

Mobile: 682-***-****

acyk8w@r.postjobfree.com

Education:

PHD in System Engineering (Electrical & computer - control systems) 1994 - 2001. Oakland University. Rochester, Michigan.

Master of Science in Mechanical Engineering. (M.S.ME), AUG 1989. Wayne State University (W.S.U.). Detroit, Michigan, (Advance Fluid mechanics and control).

Bachelor of Science in Mechanical Engineering. (B.S. ME), May 1985. University of Detroit (U. of D.).

Business administration Management in Small enterprise projects, and program and business management experience and certification, Dec 1987, UNDP Certificate– Italy.

Qualification profile:

Highly talented and qualified product development such as Rotating Equipment’s design, Such as shale Oil and Gas Fracture Pumps 1800HP, 2250HP, 2500HP design export, fluid ends design and development, Pipes, valves, field Fracture drilling, high pressure drilling equipment, pipes drilling operation design Engineering project management, Facility Engineer project management, Drilling fluid, Mud fluid mechanics, management system and testing to minimize formation and drilling fluid improvement. Reservoir assessment planning such as well product development Frac pumps fluid end for fracturing. Designed testing equipment and new product full control system design including sales and marketing products. Downhole drilling, Hydraulic system, completion & fishing tools pump truck, blender, and coil, rigs & cranes and trucks built with engines and transmission, including hardware development Eager to learn new product, technology and on shore and offshore Drilling Rigs operations, I & C control, process &Equipment Subsea Riser System.

Diversified experience in product development and innovation such as rotating equipment, Frac pumps, centrifugal, fluid ends oil and gas, field support, fluid drilling dynamics, completion tools, rotating equipment’s complies with API 610 & API650, Solid control equipment’s, shakers, degas, splitter, Engine vehicle dynamics, Transmission, catalyst, and electro-mechanical system applications. Performed design specifications including performing rotating equipment sizing analyses for turbines, other compression, valves and pumps as well as calculating fluid flow.

Certified engineer on all of engineering displace such as ASME, FMEA, G8D, System Engineering, reliability in design, TD, DFMEA, REL, ED, PD, PCM, DVP&R ACF, QA/QC inspection, Black and Greenbelt (6 sigma), including ISO9001.

Performs economic evaluation and cost estimating including conducts plant, field optimization and feasibility studies as well as expansion studies for Oil and Gas projects.

Coordinates implementation of projects and ensures successful completion of the assigned project phase within the budgeted time and cost constraints with strong focus on safety and environmental considerations.

Performed Project management experience in engineering product design and development for Oil & Gas projects.

Led product quality to improving the efficiency and productivity of product and Process By utilizing Root Cause Analysis, methods to solve process issues and institute new Preventive and Predictive methods and procedures. Reduced cost and improving product quality through warranty project for customer satisfaction, increase product market share and improve company profit targets

Led QC/QA quality control and validate product and review critical product characteristics and critical process variables to implement of sustainable corrective action plans for robust quality. Ensure Identify and eliminate common causes of product and process variations to improve product durability and reliability.

CAD Experience - Solid works experienced and Inventor.

Randstad Engineering; Fort worth, TX

Consultant - Drilling Engineer/Fluid Mud Mix - 10/2014 – 4/2016: Product development to Design Drilling rotating equipment’s. Fluid Mechanics control, a MWD/LWD, record data using mud balance Schlumberger S/W, and Mud balance, Retorts test for Oil/Water Ratio and drilling control system stability. Oil based drilling fluid property mat'l related to emulsion stability and oil wetting capability per API-13B-2 spec, rheology test using Rheometer is a precision multiple speed rotational viscometer designed specifically for field testing the rheological properties of drilling fluids to verify plastic viscosity and yield point of the drilling fluid being tested.

Solid control equipment’s performance monitoring such as degas, shaker, splitters, mud reservoir and MWD measurement, and material stock monitoring.

Designed rotating equipment’s such as Fracture pumps, Mud pumps shakers, fluid end, pipes, and valves.

preparing well data sheets; designing and selecting well-head equipment; drawing up drilling programs, taking account of desired production flow rates;

obtaining relevant data, carrying out engineering analysis on site and recommending necessary actions and writing up reports;

monitoring the daily progress of well operations; keeping track of current daily costs, comparing actual costs with expenditure proposals and recommending cost-effective changes; liaising with specialist contractors and suppliers, such as cement companies or suppliers of drilling fluids; monitoring safety and ensuring the good maintenance of the well.

TSC OffShore Corp – Engineering Technical Project Manager -Drill Equipment, Rigs, Cranes, Solid Control & Frac Pump – Houston, TX: June 01, 2012 – 9/2014 : Product Development Senior Engineer for Rotating Equipment’s such as Fracture pumps fluid ends pipes valves. Designed, developed, and drilling operating such as fracture and treatment. Designed and analysis of Fracture Pump TWS2250HP and QWS2500HP from concept design including fluid end to produce drawings for manufacturing, production and assembly by using Solidworks tools. Mud pumps design, fluid flow & lubrication schematics and product improvement. Lead Project management, Designed, developed, and drilling operating such as fracture and treatment. Designed and analysis of Frac Pump TWS2250HP and QWS2500HP from concept design including fluid end to produce drawings for manufacturing, production and assembly by using Solidworks tools. Mud pumps design, fluid flow & lubrication schematics and product improvement.

Developed Fracture pumps products 2250HP and 2500HP including manufacturing process and launch, evaluated and, installed, operated, and maintain mechanical rotating equipment’s, shakers, downhole tool products, equipment, systems and processes to meet client requirements, applying knowledge of engineering principles

Analyzed customer application proposal completion tools, Rigs and Crane, completion tools, specifications for Oil and Gas well Frac pumps requirements.

Developed pressure limit requirements for fluid end application requirements.

Designed and developed Fluid end size range from 33/4” to 7.5” for various Frac pump applications pressure limits up to 24000 psi.

Participated in rigs, and crane, Frac Pumps design, electric motors for shale testing, specifications, service manual and manufacturing requirements for Frac Pumps production requirements.

Developed hydraulic Dura-prove leak design and improved fluid end life cycle with optimized material compositi Led product quality to improving the efficiency and productivity of product and Process By utilizing Root Cause Analysis, methods to solve process issues and institute new Preventive and Predictive methods and procedures. Reduced cost and improving product quality through warranty project for customer satisfaction, increase product market share and improve company profit targets

Led QC/QA quality control and validate product and review critical product characteristics and critical process variables to implement of sustainable corrective action plans for robust quality. Ensure Identify and eliminate common causes of product and process variations to improve product durability and reliability.on and manufacturing process.

Gardner Denver– Engineering Project Manager -– Water Jetting (Oil and Gas) September 05, 2011 – May, 2012

Developed Jetting product integration including design improvement for Frac Pumps, Fluid end Power end applications, pressure vassal, Pipe design and developed material, design specifications and service.

Responsibilities of Frac Pumps specifically fluid pumps gear pumps Provide technical assistance during FAT (Factory Acceptance Testing) and SIT (System Integration Testing) Requirements. Develop Pump test setup with full monitoring system.

Designed and integrated automatic water jetting Frac Pump Developed water jetting test setup applications for various applications using OPT22 programs for pump testing and auto frottage.

Provided engineering support in Oil field operations, system engineering and integration of pump compatibility with power. product design improvement such as develops research project and testing.

Consultant – Engineering Project Manager

Total Equipment and Services & Down-Hole National Oil Varco for Oil industries: (Engineering Team Leader) - Texas

April, 2011 – Sep, 2011

Lead Oil drilling Service Equipments makeup and breakout bucking and test equipments design and technical support to resolve engineering issues including design improvement. Lead downhole drilling, completion & fishing tools, rigs, and crane, Hydraulic fracturing and completion, Resolve downhole drilling hydraulic and fishing tool design improvement and efficiency for installation, material property robustness and verifications. Lead new Power end 2250 HP Pump product design and technical support to resolve engineering issues including design improvement for new high pressure Triplex pumps power end applications from concept to production.

Lead field equipment trucks design build and services for Frac Drilling Pump, cementing, fracturing, sand control, mixing, natural gas compression transportation system such as Twin Fluid Pump uses two deck mounted diesel engines to drive the fluid pump for Oil drilling customers such as BJ, C&J, Halliburton, Sclumberger, ..etc..

Lead Reservoir, tanks grinder and blender design and build of 1330 HP Trailer Mounted Twin Fluid Pump uses, Detroit diesel and Cummins Engines with Allison HD4700 Transmissions, Chem-add tanks on deck, triplex fluid pumps, and integrated customer-supplied Data Acquisition System.

Ensures root cause analyses are completed for failures related to products and services and informs customer of the relevant findings and actions.

Collaborates with R&E to resolve technical challenges and recommends improvements to products and services.

Proactively supports the implementation of corrective measures for product or service failures.

Resolves customer operational conflicts in a professional, ethical manner.

Manages daily pricing and invoicing according to the contract terms.

Ensures all critical data required to complete daily customer reports is accurate.

Manages all project reporting requirements as specified by the customer.

Completes and delivers the final project recap report to the customer.

Evaluates the project drilling performance data against relevant benchmark data for the delivered products or services, and reports the performance results.

Weir Oil and Gas (SPM): Engineering Project Manager – Fort Worth, Texas

October 05, 2009 – April, 2011

Designed new product integration including design improvement for Destiny Pumps, Power end applications TWS600S, QWS900S, TWS2250, QWS2500, BJ 3000 and QWS3500 pump, including fluid ends, Valves (check, butter fly, chock), pressure vassal, Pipe design HVAC cooling and developed material, design specifications and service. Field experience in supporting construction and start up activities with timely advice, and co-ordination with various engineering disciplines and resolution of problems.

Designed a new Destiny pump test setup, Chiller, shell and tube heat exchanger, cooling and fluid end Valves (check, butter fly, chock), setup requirements for both mechanical and Hydraulic drive. Registered two Patents (069JB.044290, 02393644, 02393844 & 02395158).

Provided engineering support in Oil field operations, system engineering and integration of pump compatibility with power. Provided technical support to multi-task projects in both research and test laboratory operation projects. Supported water pumps and fluid ends product improvement such as develops research project and material specimens tests and Assisted in field failure concern issues.

CAD Experience - Solid works experienced and Inventor for pump parts design.

Measure viscosity, Mud balance, Retorts test for Oil/Water ratio, Chloride, Alkalinity and water hardness, HTHP, electric stability - oil based drilling fluid property mat'l related to emulsion stability and oil wetting capability per API-13B-2 spec, rheology test using heometer is a precision multiple speed rotational viscometer designed specifically for field testing the rheological properties of drilling fluids to verify plastic viscosity and yield point of the drilling fluid being tested.

(Consultant) Volvo 3P Electronics System Engineer

July, 2008 – Aug, 2009

Developed Software interfaces specifications for Subsystem and system level ECU requirements for diesel, natural gas engine applications including cluster interface communication protocol such as J1939, J1587, and ISO and CAN network.

Developed OBDII & EE architecture protocol for the North American market providing customer requested features while taking advantage of common solutions.

Ford Motor Company (Total professional experience of 14 years in Ford Motor Co.)

July, 1993 – September, 2007 (Group Engineering Leader)

Designed Engine mechanical components Engine and transmission Hardware including PCM (Powertrain Control Module) hardware design (circuit board design, EMC guidelines & CAN layout) and release software and hardware for the truck module applications, and support resolution of PCM HW/SW issues. Ensure Engine development of PCMs, Sensors, Fuel Cell, hardware and vehicle development ECMs to ensure calibration are delivered on time for current and future Gas/ Electric Motor Hybrid control module from design development to production. Air induction, Exhaust system and project management.

Accomplished and developed a low level driver monitor software/ hardware interface (Powertrain control module spark duration diagnostic system)

Act as QM for QA/QC monitor and resolve manufacturing feasibility issues. Develop Engine components, Transmission system, & control architecture design and system models.

Define system Integrate program targets, developments and deliverable to meet specification and program milestones.

Lead team to resolve development, manufacturing quality, reduce cost and validation issues and identify root cause and eliminate the issues.

Develop robust and feasible application and find product solutions to minimize product cost and maximize profitability.

Lead product development, Validation, and launch to production including DFMEA, Vehicle durability and bench testing, HIL, CFTS, PPA, APQP deliverables for production release.

Work with manufacturing to develop Processes and Roles and Responsibilities’ Matrixes for global projects together with global counterparts to ensure feasible and optimize process to meet profitable and low reject rate.

Coordinate with multiple team manufacturing, customer and testing activities on product progress and report to management launch status, issues, customer and internal reporting standards.

Control and manage budgets including staff use, technology, facility and equipment requirements or improvements.

Developed requirements/specifications; perform model analysis, algorithm development, code generation and system integration.

General Motor Corporation (contract) – Powertrain (Hydra-matic) Ypsilanti, Michigan.

January, 1991- July, 1993 – Design and Release Engineer – Automatic Transmission

Complete Responsibilities were Automatic Transmission design valve body, Force Motor, Solenoid, Hydraulic Clutch, Torque Converter, Oil Pump, assembly complete system design solenoid valves, valve body and calibration/model changes and releases (including Valve body, gear sets design) for the 4L80-E Transmission.

Skills: Solidworks, Inventer, Fluid Mechanics, Modeling, Fluid Dynamics, Fracture mechanics, Fatigue analysis, MS Project management, Stress analysis, Mud Ware, Blue view, WellSyncN Testing.

References furnished upon request

Contact this candidate