Electrical service tecnician
Resume:
JUNRIEL ROBLE CALO
MOBILE NO. +966*********/ +639*********
EMAIL ADDRESS: ***********@*****.***
GMAIL ADDRESS: *************@*****.***
SKYPE ID: junrielcalo27
POSITION DESIRED: ELECTRICIAN/ ELECTRICAL and INSTRUMENTATION TECHNICIAN
ABOUT ME:
Certified Diploma in Bachelor in Electrical Technology holding the license of Registered Master Electrician with six years of industrial, commercial and residential experience. Adept a performing electrical installation, maintenance and repairs in homes and plant facilities; knowledge in all areas in national electrical code; and analysing and solving problems with various electrical controls and system.
KEY SKILLS:
PLC software Programming and hard wiring – Direct Digital Control (DDC) – Heat and Ventilation System(HVAC) – Coils and Solenoids Operating System – LV Power Distribution – Electrical Controls System Low Voltage(LV) – Electromechanical Repairs – Types of Switches and Circuit Breakers – Contactor and Relay Logic Control – Electrical Codes-Safety and QA – Microsoft Word, Power Point, Excel, WordPad – Wiring and Control Diagrams – Troubleshooting – Installation, Testing and Configuration of Instrumentation Device – Induction and Centrifugal Motors – Rewinding of Electrical Motors – Installation and Configuration of Variable Frequency Drives and VFD Motor – Fire and Smoke Alarm Devices - Cable trays and Conduits – AC-DC Circuits – Rectifier and Inverter.
OBJECTIVE:
To develop a professional skill and contribute to a dynamic organization which recognize and encourage creativity.
To strive for excellence and put in my best for the growth of the company where productivity, efficiency, and discipline are well established.
To work hard with the team of leading professionals that will help maximize my potential in order to make company’s objectives reality.
EMPLOYMENT EXPERIENCE:
February 08, 2014 – February 08, 2017 Al – Alwan Contracting and Maintenance Co, ltd.
25st. Al Khobar, Saudi Arabia
Projects Attended:
Period: March 2015- February 25, 2016
Project: Sadara Chemical III- HVAC Project
Technicas Reunidas (TR)
Jubail Industrial City 2
Company: Petra- Al Alwan Contracting & Maintenance Co, Ltd.
Position: Electrical and Instrumentation Technician
Project Highlights:
Installation of centralized HVAC unit in electrical substation.
Installation of two chiller unit in main control room and offices.
Responsibility:
•Programming a programmable logic control (PLC) and human machine interface (HMI) using SIEMENS TIA- PORTAL. S7-300 and S7 1200 with PROFINET communication interface to SIEMENS KTP1000. Conventional hardwiring, PLC hardware wiring, programming, debugging, commissioning.
• Honeywell PLC controller model 2026B21, PLC wiring and termination and modification,
Trouble shooting.
•Termination of Direct digital control (DDC) going to motor control junction box (MCJB) and MCJB to Motor control centre (MCC)
•Start-up machine from DDC controller by auto mood and manual.
•Configuration of Honeywell actuator valve and differential pressure transmitter and thermostat, flow switches for chiller pumps, air flow switch.
•Installation of chiller instrument, flow switch, water temperature sensor, motorized actuator valve, variable volume box controller, and heater.
•Termination of chiller control panel going to DDC.
•Wiring and termination of field instrument sensor, air flow, and differential pressure transmitter, and differential pressure switch, temperature, and air damper.
•Termination of HVAC unit control panel going to DDC panel.
•Termination of Power cable of HVAC unit.
•Assist Honeywell commissioning for configuration and start up.
•Calibration of instrument devices, motorized actuator valve.
•Inspection of all electrical equipment and generator.
•Troubleshoot AC generator and portable generator.
•Site survey for cable tray routing, instrument location and electrical conduits location.
•Installation and layout of cable tray, raceways, conduits, and instrument stanchion and supports.
•Cable pulling and continuity test of cables and wires.
•Layout and installation/fixing/dressing of multi-core single pair cables.
•Installation of instrument junction boxes and auxiliary terminal boxes.
•Fixing and installation of dry type transformer and power panel box.
•Modification of control wirings.
•Troubleshooting of HVAC controls and motor control.
Period: February 2014- November 2015
Project: Saudi Aramco School. (hufuf, al ashaa, al khobar, Dammam, quatif, rastanura, Saudi Arabia.
Position: Electrical and Instrumentation Technician
Project Highlights: Installation of instrument field devices and termination of Direct Digital
Control
This project upgrade old panel to Direct Digital Control (DDC). The old panel replace to honeywell DDC controller to monitor the HVAC unit for automation.
Responsibility:
• Site survey for cable tray routing, instrument location and electrical conduits location.
• Installation and layout of cable tray, raceways, conduits, and instrument stanchion and supports.
• Layout and installation/fixing/dressing of multi-core single pair cables.
• Installation of instrument junction boxes and auxiliary terminal boxes.
• Cable pulling and continuity test of cables and wires.
• Wiring and termination of field instrument sensor, air flow, temperature, air damper.
• Termination of HVAC unit control panel going to DDC panel.
• Termination of Power cable of HVAC unit.
• Assist Honeywell commissioning for machine start up.
• Installation of power panel and termination of cable.
• Cable pulling of underground service entrance high voltage cable
• Installation and termination of dry type transformer, circuit breaker, change over switch.
Period: November 2015
Customer: Hadeed/ Saudi Basic Industries Corp.
Position: Electrical and Instrumentation Technician
Project Highlight:
Steam pipeline bypass. Installation of instrument devices.
Responsibility:
• Site survey for cable tray routing and conduits and stanchion and support.
• Installation of junction box and control box.
• Installation of instrument devices, flow meter, pressure indicator, temperature detector.
• Layout and installation/fixing/dressing of multi-core single pair cables.
• Assist for commissioning.
Period: January 2016
Customer: Saudi Kayan
Position: Electrical and Instrumentation technician
Project Highlight:
Replacement of manual valve to motorized actuator valve.
Responsibility:
• Site survey for cable tray routing.
• Termination of motorized butterfly valve.
• Installation of cable tray and conduit.
• Assist for commissioning and start up.
• Layout and installation/fixing/dressing of multi-core single pair cables.
Project started: August 17, 2011- February 01, 2014
Company: Aboitiz Construction Group, Inc. – metaphil
Mandaue, Cebu City.
Customer: Philippines Costal Storage and Pipeline Corporation.
Position: Electrician/ Electrical Technician
Project highlights:
Additional of 13 tank farm.
Responsibility:
• Installation of cable trays conduits, instrument stanchion and support.
• Installation of instrument, flow meter, level transmitter, and control valve.
• Wiring and cable pulling.
•Loop check and continuity test of instrument.
•Installation of three phase wye delta banking transformer and termination.
•Installation of main panel board and circuit breaker.
•Termination of motors, generators, and welding machine.
•Conduct load calculation.
•Trained co- technician for proper using of tools and equipment.
•Conduct preventive maintenance of generators and tool, equipment.
•Installation and maintenance of air-conditioning.
•Installation and trouble shooting of residential house wiring and fixing receptacle, power outlets, switches, fan, housing and laundry appliance.
•Trouble shooting of electrical controls, and modification of wirings.
•Rewinding of Electric motors three phase and single phase.
•Troubleshooting and maintenance of split and windows type air conditioning.
Project Started: Dcember 01, 2010 – July 26, 2011
Company: Agusan Plywood Corporation
Position: Electrical Technician
Responsibility:
Fabricate power and control panel.
Trouble shoot hydraulic and pneumatic cylinder, electric hoist, wood lathe machine, wood dryer, and boiler.
Rewinding of electric motor, three phase and single phase.
Conduct preventive maintenance of electrical motor and all electrical equipment.
Installation and termination of control panel in lathe machine, press hydraulic machine, wood dryer and boiler.
Installation and termination of single phase and three phase electric motors, contactors, solenoid valves, sensors.
Conduct preventive maintenance of standby generators.
Conduct preventive maintenance of banking transformers and banking capacitors.
Trouble shoot Programmable logic control and identify the problems for the machine.
Assist plant operation to solve all the problem of machine and equipment.
Troubleshooting and fixing of electrical lightings, outlets and air conditioning.
Installation and trouble shoot power outlets and lightings.
TRAINING AND CERTIFICATE:
Title : Programmable Logic Controller/ Human Machine Interface
School : Metrologyx Industrial Instrumentation Training Center
Address : Mandaue City, Cebu., Philippines
Title : Instrumentation and Control NC II
School : Electro Technical Institute
Address : Capinpin St. San Jose, Balanga, Bataan, Philippines
Title : National Certificate (NC II) in Building Wiring Installation
School : Technical Education and Skills Development Authority
Address : Cabadbaran, Agusan Del Norte, Philippines
Title : Certificate of Eligibility – Building Wiring Electrician, serial no: 330*********
Agency : Civil Service Commission
Address : CARAGA – Butuan City
Title : Construction Occupational Safety and Health, serial no: 032313
Agency : LABSPEAK Safety Management Incorporated.
Address : Subic Bay Free Port Zone, Zambales, Philippines
Title : Certificate of board examination in Registered Master Electrician.
Agency : Philippines Regulation Commission.
Address : Manila, Philippines.
Title : Work Permit Authorization
Company : Sabic- Saudi Kayan
Authorization no. 2062
Badge no. 236*******
PROFESSIONAL EXPERTISE/ LICENSE:
Professional Regulation Commission – Manila
Registered Master Electrician
April 2013
License number: 40542
EDUCATIONAL BACKGROUND:
COURSE : BACHELOR IN ELECTRICAL TECHNOLOGY- Graduated
COLLEGE
School : Caraga State University
Address : Cabadbaran City, Agusan Del Norte
Year Graduated : March 29, 2011
SECONDARY
School : Agay National High School
Address : Remedios T. Romualdez, Agusan Del Norte
Year Graduated : March 2007
PRIMARY
School : San Antonio Elementary School
Address : Brgy. San San Antonio, Remedios T. Romualdez, Agusan
Del Norte
Year graduated : March 2004
PERSONAL BACKGROUND:
Place of Birth : Brgy. San Antonio, Remedios T. Romualdez, Agusan del Norte,
Philippines.
Present Address: Brgy. San Antonio, Remedios T. Romualdez, Agusan del Norte,
Philippines.
Date of Birth : January 27, 1989
Age : 27
Sex : Male
Height : 5 feet and 4 inches
Weight : 63kgs
Civil Status : Single
Citizen ship : Filipino
Religion : Roman Catholic
CHARACTER REFERENCE:
1.RAUL MISCALA
Aboitiz Construction Group, Inc. – metaphil
Project manager
2.NOOR EDEN AL ANATI
Al Alwan Contracting & Maintenance Co, Ltd.
Project Manager
Contact this candidate