Assembly Line Forklift Operator

Lonnie Hardwick

******************@*****.*** - 832-***-****

Authorized to work in the US for any employer

WORK EXPERIENCE

Assembly Line Worker

Goodmen manufacturing inc - Houston, TX - October 2016 to October 2016 My job duty was to assemble air conditioners and heating products using air compressed hand drill's, I have also use a machine the company called the roller, we would put a thin long sheet of metal onto the machine and make sure it is secured right before I would start the process. I would place two side mounts onto the machine and lock them in place so that the three components would join together once the machine has completed the first step. Also I would print a label scan it as well as the first component that goes in to start the building process I would place them inside of the empty frame and send it to the next assembling process. Receiving Associate

Express packing of Ohio - Ontario, CA - March 2016 to July 2016 Unloading the items or product from trailers onto pallets by there UPC or Po so that they are put into the right location after the trailer was completed I would count all the pallets to make sure that the count matches the count on the manifest. If the count is correct I would print labels for the pallets then wrap the pallets so that they can go to its right location or to shipping.

Assembly Line Worker

Allied manufacturing inc - Ontario, CA - March 2015 to July 2015 My job duty was loading and packing napkins, paper towels, tissue, and some restaurant take out bags. I was also trained to operate the trash compactor that compressed the product that did not come out properly into large bails.

Assembly Line Worker

PARTNER STAFFING - Ontario, CA - August 2014 to June 2015 The team would start the shift off with a safety meeting so that no one would get hurt or injured. I would set up my station by cleaning what the trash that would be in my way, I would hang trash bags up so it would not dirty my area. After this task was completed I would ask a forklift driver to bring me some pallets so I can start my job duty. I would unwrap the pallets take the crates from the pallet 25 at a time and place them on to a table for my next team member to start the next process. The crates are used at varies grocery stores like Wal mart stater brothers Ralphs as well as other places the crates were used for cucumbers, onions, lettuce, peppers and fruits.

Trader Joe's

Chino, CA - May 2013 to January 2015

i was a order puller before i started pulling my orders i would check my electric pallet jack to make sure it work properly and correctly. then i would go to the cage to get my rf scanner gun then i would get my labels and start picking my orders from its right location once i completed that order i would wrap it so that it wouldn't fall or tip over while im taking it to the wrapping station Target import warehouse 04-4-13 01-10-2014

Loading and unloading items from the conveyor into the trailer or from the trailer onto a conveyor right on to pallets. Shipping is the main job duty that I had loading product from the conveyor right into trailers all team members had to stock all the trailers from top to bottom until there were no more items that could fit inside the trailers then I would go to the next trailer and repeat the process. I would also be put on special projects as a temporary agency member I would get the job done in no time and with no problems. I also supervised team members on how to load trailers from top to bottom correctly at a steady pace and to help with and problems that my have happened.

Receving

N.F.I - Mira Loma, CA - February 2014 to May 2014

I would get a pallet jack so that I could complete my job duty using the pallet jack to unload the product from the trailers on pallets then scan the items into the correct trailers before i unloaded the product into its correct trailer Order puller

Khols-Order - San Bernardino, CA - March 2011 to March 2013 My job duty was order pulling i would go to the cage to get my wrist rocket or RF scanner so i would be able to complete my orders. once i got my scanner i would get me a cart to pull around so i would be able to get multiple items. Next i would assemble some boxes so i could place the items onto a boxes so the order could be completed.

RSI Communities

I am part of a team of construction workers that are divided up into different stations of work down an assembly line that constructs housing frames. The station I work at does window installation and plumbing for the house. Sometimes I help other co-workers at their stations when I finish early at my station, to keep the assembly line moving at its appropriate pace. I help cut all lengths and sizes that are needed for the house and for assembling stairs

volunteer

TLC of IE Pet Rescue - Colton, CA - October 2008 to July 2011 currently employed i

n Colton, CA

I am responsible for a volunteer kennel crew. I make sure our team cares for shelter rescued dogs and puppies. We provide food, water and attention to every dog, as well as cleaning and disinfecting kennels and crates. I also have to make sure there is a clean and healthy environment for the animals to live in. We also get them ready to go to the weekend Pet Adoption Events.

On the weekends, as a part of my personal goals to serve my community, I volunteer my time to set up and manage the adoption shows so the dogs can be shown and adopted to new loving families. I am the volunteer coordinator and trainer and teach the teens that want to help the non- profit pet rescue. SDAP CREW MEMBER

N.C.I.D.C, INC - BIG BEAR, CA, US - 2007 to 2008

Assisted with tree and brush removal after destructive fires in the Big Bear, CA area Working hand in hand with fire departments, police and emergency response teams in rescue efforts. Maintained a healthy and safe working environment for myself and team members according to state and national guidelines. Worked along side state parks and national wildlife association officers to identify safe and unsafe habitats for wildlife indigenous to area.

Commended for outstanding service and attitude after 3 months of working Taking measures to prevent further damage and devastation during fire. After fires are extinguished, to work with state and city workers to enact precautionary procedures for any future events.

Tool manager /Chef

California Conservation Corp - 2005 to 2006

Ukiah, ca

Preparing and served food and beverages to all crew members, response teams, park rangers and evacuation teams.

Provide basic safety instruction to all N.C.I.D.C crew members before engaging and periodically during the project, the safety practices of, and use of appropriate safety equipment by each member of the NCIDC crew. Ensuring that appropriate tools, Equipment, and safety gear are available to each member of the work party. ADDITIONAL INFORMATION

SKILLS

Excellent task and work skills

Good team player

Cutting trees/Construction worker/landscaping

Powered Industrial Truck Operator

I have received my sit down, stand up, electronic pallet jack, clamp and cherry picker Certification Forklift Operator (8 years), Warehouse (8 years)

Contact this candidate