Engineer Mechanical Engineering

SUMAN KUMAR MAJEE

B.E in Mechanical Engineering

E-mail: *************@*****.***

Mobile: +91-887*******

OBJECTIVES:

Seeking for a quality level position in a growth oriented organization. Open to all assignment that will improve my professional skills in a stable work place. Betterment of organization is my priority.

EDUCATION PROFILE:

School Secondary Examination from Jharkhand Academic Council with 68.8% marks in 2007.

Higher School Secondary Examination from C.B.S.E Board with 68.8% marks in 2009.

B.E in Mechanical Engineering with First Class from SGBAU University, Amaravati (Maharastra) in 2013.

SKILL SETS:

Mechanical Engineering Process: Fabrication, Machining, Pipeline, Station Piping.

Office Utility Tool : Microsoft Word, Excel, Power Point, Access etc.

Testing : Non-destructive, Destructive, Chemical, Adhesion etc.

OTHER CERTIFICATION:

Level (II) NDT (UT, RT, MPT, DPT, VT) from (ASNT) Rastriya Technical Institute (Jamshedpur).

CATIA V5 R-18 from IDTR, Jamshedpur.

WORK EXPERIENCE:

Currently Working as Inspection Engineer in VCS Quality Service (P.) Ltd. Mumbai for the CGD project of Gujrat Gas Ltd. From 20th April-2016.

QA/QC Engineer in Likhitha Infrastructure Pvt. Ltd. Hyderabad, from april-2014 to march- 2016.

Graduate Engineer Trainee & QA/QC Engineer in Technofab Mfg. Ltd. Village- Uparipallayam, Near Edapalliyam, Red-hills, Chennai (Tamilnaddu) from June 2013 – March-2014.

PROJECT : STEEL PIPELINE CONSTRUCTION FOR CITY GAS DISTRIBUTION.

CLIENT : GUJRAT GAS LIMITED.

DESIGNATION : INSPECTION ENGINEER

COMPANY : VCS QUALITY SERVICE PVT LTD.

Major Assignments for VCS:

Stage-wise inspection, monitoring & witness of line pipes as per approved QAP & client specification.

Review of manufacturer procedure as per client specification.

Manual UT of pipe ends and tie-in joints.

Magnetic particle inspection of pipe Bevel ends witnessing, Dye penetrate test witness for repair after gouging.

Review of Radiographic films of the welds.

Witnessed pre and post hydro test of pipes and fittings with calibration witness of instrument use for such activity.

Witness of mechanical testing viz. tensile test, hardness test, guide bend test, impact test as well as chemical analysis.

Review and witness of TLP installation.

Review of cathodic protection technique to control the corrosion of a metal surface by a use of electrochemical cell.

PROJECT : LAYING AND CONSTRUCTION OF PIPELINE & STATION PIPING WORK FOR CNG STATION.

CLIENT : INDRAPRASTHA GAS LIMITED

COMPANY : LIKHITHA INFRASTRUCTURE PVT LTD.

DESIGNATION : QA/QC ENGINEER

RESPONSIBILITIES:

Inspection of city gas distribution network Mild steel according to ASME 31.8 section B.

To carry inspection of the pipeline network as per the company guidelines.

Site survey for the extension of existing network.

Co-ordination with the utility owners like Municipal Corporation, telecom companies, to maintain the safe working condition on site.

Inspection of SMAW Welded mild steel pipes GRADE X-52M PSL 2 according to API 1104 & client specification.

Verification of documents, conducting welder qualification test & issuing welder ID cards for qualified welders and monitoring of welder performance.

Maintaining Quality related records as per ISO procedure.

Ensuring stage wise inspection as per approved quality plan.

Maintaining Pipe book & controlling the same.

Interpretation of Radiographic films as per API 1104 & client specification.

Weld visual inspection and witness the ultrasonic testing for weld repair & tie-in joints.

Lamination check of pup-piece by ultrasonic testing & DPT.

To maintain records for the each activity carried on site like laying, welding, flushing and testing of entire network.

Trench inspection (open cut, HDD & Boring) & cased crossing & crossings (Highway, Road, Railway, Canal, Nala, River etc).

Back-filling & Restoration inspection as per specification.

Holiday inspection of field joint coating & Peel test.

Surface preparation & Joint coating of pipes.

Visual inspection surface preparation of MS pipe by sand blasting.

Inspection of external 3LPE/FBE/Coating such as preparation to blast cleaning, surface profile, surface cleaning, dust contaminant test, phosphoric acid & water washing, Induction &Holiday test.

Also for surface preparation & their testing, wet film thickness (WFT), dry film thickness (DFT), adhesion testing, pinhole or holiday testing & other lab testing such as water test, bend test as per client specification.

Site documentation such as site TBT, SSRA and HSSE Reporting.

PROJECT HANDLED IN STRUCTURE & EUIPMENT FABRICATION:

COMPANY NAME : TECHNOFAB MFG. LTD.

Project 1 : Boiler Housing & Air-Preheater structure

Client : BGR Boiler Pvt. Ltd.

Designation : QA/QC Engineer.

Description : BGR energy engaged in manufacture of STPP Boiler housing & Air-preheater Structure Items, We were engaged in manufacturing of components starting from the First tier to Seventh tier structure, i.e. column, girder, beam, bracing, Roof structure, purlin, Duct wall structure etc.

Project 2 : NTPC Kudhgi site Ducts and General Structure.

Client : Doosan Energy System Pvt. Ltd.

Designation : QA/QC ENGINEER

Description : Doosan is engaged in design and construction of STPP Power Plant project in NTPC Khudgi (Karnataka). We were engaged in manufacturing of different type of Duct Wall Structure of Boiler Component and General Structure.

Project 3 : Installation/ Up gradation of Conveyors and Crushing/Screening Building (Ores Mines) Bolani, Orissa.

Client : Steel Authority of India Ltd. (SAIL)

Designation : QA/QC ENGINEER

Description : SAIL is engaged in design and construction of Ores Mines in Bolani Orissa. We were engaged in manufacturing Screening and Crushing Building structure Column, Base column. Purlin, laced Purlin, Hand Rail, Floor Bracing, Floor beam, Bracing, Grid Beam, etc.

Project 4 : Railway Engine Equipment structure (for e.g. Headstock, sidewall, central under-frame etc).

Client : Chittaranjan Locomotive Works (CLW).

Designation : QA/QC ENGINEER

Description : CLW engaged in manufacture of Railway electrical engines. We are doing the fabrication work of different mechanical structure such as Head Stock, Under-frame, Central Under-frame, side wall, Roof structure etc of engine as per the design of client for the different type of engine of minimum speed to high speed trains. The different type of quality analysis process we are following as per the instruction and routine of client from pre-process to final stage of job.

RESPONSIBILITY AND DUTIES:

To assist the Site Superintendent & coordinate the supervisor’s activity, carry out and implement the QA/QC program, arrange and conduct meeting under the Site superintendent direction.

Visual checking of material as per dimension and material test certificate.

To visit site daily to check whether all works, material, equipment are in accordance with the QA/QC Program. When defective material equipment or workmanship are found immediate action to be taken to correct them.

Coordinating with internal inspection teams for inspection process. Checking the completeness of component dimensions and quality parameters. As per QAP(Quality assurance plan)

Preparing the weld inspection & material traceability certificate and updating the same.

Inspecting the weld fit-up of joint prior to root pass and visual inspection of final weld. Conducting penetrating test on welding joints.

Planning/organizing and checking of work progress and schedules to meet the deadline/target dates and implementing QA/QC plans.

Field Quality assurance maintaining the relevant Quality activity as per document(QAP)

Maintaining the Quality Document by client associate document like field register.

Conducting through stage-wise inspection as per procedure/codes as well as alignment.

Coordination with finishing department such as blasting and Painting.

CUSTOMER & INSPECTION HANDLING:

BHARAT HEAVY ELECTRICALS LIMITED

BGR BOILERS PVT LTD

DOOSAN ENERGY SYSTEMS PVT LTD

NATIONAL THERMAL POWER CARPORATION LIMITED

CHITTARANJAN LOCOMOTIVES WORKS

STEEL AUTHORITY OF INDIA LIMITED

INTEREST & HOBBIES:

Playing table tennis.

Reading news and magazines of political affair.

PERSONAL INFORMATION:

Name

Suman Kumar Majee

Date of Birth

15/05/1992

Father’s Name

SHRI MUKESH CHANDRA MAJEE

Marital status

Unmarried

Nationality

Indian

Religion

Hindu

Languages Known

English, Hindi, Bengali (Read, Write, Speak)

Present Address

Village: Belut, P.O: Alkusha, P.S: Chas, District: Bokaro,Jharkhand-827013

PASSPORT DETAILS:

Passport No.

N1932053

Issue date

13/08/2015

Expiry date

12/08/2025

DECLARATION:

I hereby declare that all the statement made in the above application is correct to the best of my knowledge and belief.

Suman kumar Majee

Signature

Contact this candidate