Mechanical HVAC Engineer
Resume:
“Know and Learn, Grow and Achieve”
RONALD D. BARRION
B13L14 Rosewood Homes-1, Tagapo, Sta.Rosa City 4026, Laguna, Philippines Contact number: 092*-***-**** Email: *************@*****.*** CAREER/EMPLOYMENT OBJECTIVE:
To continuously advance the practice of Professional excellence in the field of Mechanical Engineering in association with a reputable Organization where Technical & Management capabilities can be fairly demonstrated to achieve an optimum win-win result in every endeavor. SUMMARY OF QUALIFICATIONS:
HVAC System - Design, Installation, Testing & Commissioning and Operation & Maintenance
Piping/Plumbing System - Design, Installation, Testing & Commissioning and Operation & Maintenance
Facilities/Utilities Systems - Operation & Maintenance Management
Mechanical Systems Construction - Project Management
Total Planned Maintenance/Reliability Centered Maintenance – Engineering & Management
Diesel Engine Power Plant - Design, Installation, Testing & Commissioning and Operation & Maintenance
Chiller Plant - Design, Installation, Testing & Commissioning and Operation & Maintenance
RO/DI Water & Waste Water Treatment Plant - Operation & Maintenance
Rotating Equipment - Design, Installation, Testing & Commissioning and Operation & Maintenance
Fire Protection System – Testing & Commissioning and Operation & Maintenance
ISO (Health & Safety, Quality and Environmental Management systems) – Practice / Implementation
Six Sigma Black Belt Practitioner
Occupational Safety Practitioner
EDUCATION:
Professional Mechanical Engineer (PME), certified by the Professional Regulation Commission (PRC) in the Philippines with License # 0004671 - March, 2013. (verify at prc.gov.ph)
Registered Mechanical Engineer (RME), certified by the Professional Regulation Commission (PRC) in the Philippines with License # 0052291 - November 1997. (verify at prc.gov.ph)
Bachelor of Science Degree in Mechanical Engineering at Colegio de San Juan de Letran – Calamba City, Laguna, Philippines - April 1997.
MECHANICAL ENGINEERING AFFILIATION:
Saudi Council of Engineers – Professional category with membership # 187528.
Philippine Society of Mechanical Engineers – Saudi Arabia Chapter with Life membership # L-233. Page 2 of 8
COMPUTER KNOWLEDGE:
Auto CADD, Micro Station, MS Excel, MS Word, MS Power point, MS Access, CMMS programs, Elite HVAC software.
PERSONAL DATA:
Birth Date: September 5, 1974
Height: 5’ 10”, Weight: 85 Kg
Citizenship: Filipino
Civil Status: Married
Religion: Christian
Language: Tagalog/English
Driving License: Philippines & Saudi Arabia (exp. 2019) PROFESSIONAL EXPERIENCE:
My 4th Company – July 2016 to January 15, 2017
Thermal Solutions Inc.
5th floor, Sycamore ARCS 1, Buencamino St., Alabang-Zapote Rd., 1770 Muntinlupa City General Maintenance Services – Outsourced Facilities Management Position: GMS Facilities Manager
Continental Temic and ST Microelectronics Facilities Light Industry & Science Park 2, Brgy. Lamesa, Calamba Laguna Summary of Works Accomplished in Continental Temic and ST Microelectronic Facilities: August 1, 2016 to January 15, 2017
Reviewed and re-organized Manpower requirements for GMS Contract with ST Microelectronics
Identified various Technical & Administrative issues related to GMS contract
Reviewed and re-organized GMS work systems for Operation & Maintenance Improvements
Conducted system analysis for HVAC and Chiller problems. Coordinated issues to Service specialist
Proposed Corrective and Improvement actions for the identified issues
Handled GMS related Projects and work orders
July 1, 2016 to July 31, 2016
Set-up Manpower requirements for new GMS Contract with Continental Temic
Identified various Technical & Administrative issues related to GMS contract
Reviewed and re-organized GMS work systems for Operation & Maintenance Improvements
Conducted Trouble shooting and system analysis for HVAC and Chiller problems specially cooling towers
Proposed Corrective and Improvement actions for the identified issues Page 3 of 8
My 3rd Company - March 2012 to February 29, 2016
Saeed Radad Al-Zahrani Corporation (SRACO)
P.O. Box # 6669 Dammam 31452, Kingdom of Saudi Arabia Operation Support Services - Saudi Aramco Projects Position: Senior Mechanical (HVAC) Design Engineer Saudi Aramco Northern Area Community Utilities Division, Ras Tanura & Jeddah, KSA Summary of Works Accomplished in Aramco:
July 1, 2013 to December 31, 2015
Led the Mechanical Team under Aramco Project Acceptance Committee to complete the Pre- Commissioning & Commissioning of HVAC & Utilities Systems of General Presidency of Youth Welfare
(GPYW) Admin Building Project at King Abdullah Sports City in Jeddah.
Led the Mechanical Team under Aramco Project Acceptance Committee to complete the Pre- Commissioning & Commissioning of HVAC & Utilities Systems of a 40,000 seating capacity Sports Hall
& Athletic Stadium Project at King Abdullah Sports City in Jeddah.
Led the Mechanical Team under Aramco Project Acceptance Committee to complete the Pre- Commissioning & Commissioning of HVAC & Utilities Systems of a 60,000 seating capacity Main Stadium at King Abdullah Sports City Project in Jeddah
Handled the review and hand-over of Mechanical Close-out documentations such as Project Record Book, As-built drawings, O&M Manuals, Spare Parts Data Packages, Warranty Certificates, Calibration Certificates, Pre-commissioning & Commissioning Records, Inspection Records and Material Submittals.
Conducted Pre-commissioning and Commissioning of HVAC & Utilities Systems and ensured that all the Mechanical equipment/systems were Installed, Tested and Commissioned in accordance with the Project Specifications and applicable Codes & Standards.
Conducted Testing, Adjusting & Balancing (TAB) for Air & Water Systems of HVAC & Utilities.
Monitored the progress of Construction works of the assigned disciplines and coordinated every concerns/issues to PMT through Aramco correspondences and Progress meetings.
Conducted Site Walk-through Inspections and generated/uploaded Exception items in the MPCS system. March 1, 2012 to June 30, 2013
Performed the previous role as HVAC Engineer for Projects and Community Utilities Maintenance after Sponsorship Transfer from Dallah to SRACO on March 1, 2012. (see below Summary of Works)
Performed additional Responsibility as Maintenance Coordinator/Planner for all types of HVAC Maintenance Work Orders covering various Aramco areas such as Saudi Aramco Training Center, KFIA Aviation, Air Strip Aviation, Health Center, Schools and Recreation Facilities. Page 4 of 8
2nd Company - March 2009 to February 2012
Dallah Albaraka Holding Company
P.O. Box # 32383 Al-Khobar 31952, Kingdom of Saudi Arabia Engineering and Technical Support Services - Saudi Aramco Projects Position: Mechanical (HVAC) Design Engineer
Saudi Aramco Northern Area Community Utilities Division, Ras Tanura, KSA Summary of Works Accomplished in Aramco:
Evaluated, reviewed and implemented various HVAC Projects for Residential, Recreational, Commercial, Hospital/Clinic, Store Houses and Offices within Aramco Community areas in conformance with ASHRAE, SMACNA, NFPA, NEC, UMC, SAES, and Industry Best Practices & Standards.
Conducted Site assessment, Cooling/Heating load calculation, Duct & Pipe sizing and System Controls provision for various Facilities and building’s HVAC requirements.
Created Scope of Work for various Projects and conducted Job explanation meetings and site walk- throughs together with different Contractors prior to project bidding.
Reviewed HVAC Technical packages and Submittals from different vendors, Proponents, Consultants and Contractors for Utility Department’s Approval prior to issuance of Notice to Construct.
Coordinated with different Engineering disciplines and concerned Departments in the Planning, Equipment Selection and implementation phases of HVAC-related projects.
Supervised, inspected and monitored the progress of Ongoing and On-stream HVAC projects and ensured that the works comply with Project Specifications, Scope of Works, Codes and Standards.
Ensured that high levels of Safety & Housekeeping are maintained in the work areas.
Provided periodic Progress Reports during Department’s Communication Meetings.
Participated in the Commissioning, Testing, Adjusting, and Balancing activities in the Performance Acceptance of HVAC Systems and generated Performance Deficiency listing during the Mechanical Completion Phase of the Project.
Reviewed and ensured that all IFC drawings of HVAC, Equipment, Piping & Instrumentation, Ducting, and Mechanical layouts of the assigned Projects are complete and updated As-built.
Ensured that Close-out Documentations like Final Reports, Commissioning data, TAB results, Drawings, O&M Manuals, Spare Parts Data Packages, Calibration & Warranty Certificates and other pertinent Project Records are complete prior to Project Turn-over and Close out.
Conducted Technical Assessment of existing problematic HVAC equipment and systems in Ras Tanura, Tanajib, Shaybah and Yanbu Facility sites of Aramco and provided Technical Support and recommendations to the Utility Division and AC Maintenance Services Unit. Page 5 of 8
1st Company - December 1997 to March 2009
Hitachi Global Storage Technologies Philippines Corporation Semi-Conductor Industry – HDD/Slider Manufacturing Special Export Processing Zone, Laguna Techno Park, Biñan 4024, Laguna, Philippines Positions Handled and Terms of Office:
Facilities Manager (April 2008 to March 2009)
Facilities Unit Manager (September 2005 to April 2008) Facilities Senior Engineer (May 2003 to September 2005) Facilities Engineer-II (May 2001 to May 2003)
Facilities Engineer-I (Nov 1999 to May 2001)
Facilities Cadet Engineer (December 1997 to November 1999) Summary of Works Accomplished in Hitachi:
Managed the Operation & Maintenance of Plant’s Facilities & Utilities (Mechanical) Systems.
Implemented the Total Planned Maintenance (TPM) in parallel with the establishment of Reliability Centered Maintenance (RCM) programs and has kept the Maintenance KPIs such as Availability, Reliability, Efficiency, MTBF, etc., to fall within the specified optimum targets.
Prepared, monitored and controlled the Section Budget for Operation and Maintenance of Facilities & Utilities systems and maintained them as close as the Planned Budget for each Term.
Applied Six Sigma approach in finding opportunities to reduce process variations to control and maintain the Key process variables within the optimum operating levels. This has led to a major breakthrough in reducing the fuel consumption of Diesel-engine Generators and the power consumption of Chillers in Energy center, and the stabilization of Temperature & Relative Humidity values inside the Production areas.
Analyzed the Key O&M parameters using different Statistical Tools & Techniques and led Engineers and Technicians in adjusting/troubleshooting the operational issues of machines and systems.
Implemented the Energy Conservation Programs of Facilities Department on a Company-wide scale and has kept the Energy/Cost Reduction targets not less than 5% on a quarterly basis.
Monitored and maintained the Regular Inventory of parts, materials, consumables and controlled the Purchase Requisitions to sustain the Operation & Maintenance.
Coordinated all Special maintenance works to all concerned parties and Departments prior to executing Major equipment Maintenance especially during Company-wide Plant shutdown.
Ensured that Clean Room qualification and certification during Plant start-ups after long days of scheduled shutdown were properly carried out and communicated to Manufacturing Departments.
Ensured that the annual Safety Inspection for Pressure Vessels & Tanks were carried out on time by a qualified contractors and that preventive & corrective measures were taken accordingly.
Conducted Testing & Commissioning of newly installed Facilities equipment and ensured that all relevant hand-over documents, orientations/trainings and punch lists items were completed accordingly.
Handled all Manufacturing concerns related to Product quality and Environmental issues in Production areas served by Facilities & Utilities systems.
Implemented and completed System Improvement Projects on time with minimal backlogs and within the approved budget.
Conducted Regular Trainings for Engineers and Technicians about Administrative matters, ISO
(Quality/Environment/Occupational Health & Safety), Housekeeping and Technical aspects of Operations
& Maintenance.
Conducted periodic Personnel Evaluation/Appraisal and Re-qualifications to ensure compliance to ISO and Work Competency requirements.
Page 6 of 8
Ensured that Company documents like Department Standards, Work Instructions, Equipment Registry, As-built drawings and Specifications of each Utility system are updated, complete and readily available for use at all times.
Participated regularly in the Facility Function meetings, Status Reporting and Teleconferencing with Hitachi Headquarters and other Hitachi sites Managers.
Facilities & Utilities Systems Handled:
Diesel Engine Power Plant (Yanmar engines 1.5MW x 8 Units)
Power Distribution System (3 Local Sub stations)
Chiller Plant (Hitachi, Mac-quay, Carrier - various capacities)
Air-conditioning system (Daikin, Kruger, Mac-quay, Carrier, Mitsubishi - various capacities)
Compressed Dry air systems (15 Hitachi compressors of various capacities)
Local Ventilation and Extract System (various units)
Centralized Process cooling system
Centralized Vacuum system
Liquid Nitrogen system
RO, DI & UDI Water Treatment Plants (30 CMH capacity)
Recycled & Waste Water Treatment Plants (30 CMH capacity)
Building Maintenance (includes Fire Alarm & Detection System, elevators, dumb waiters & lifters)
Energy saving Co-generation system (ESCO project) which recovers waste heat energy from Diesel engines Generator and powers up the Steam & Hot water Absorption chillers.
Process & System Improvement Projects
Personnel Management & Supervision Experiences:
Handled 63 Operations & Maintenance Personnel inclusive of Engineers, Technicians and In-house Contractors.
Trained, supervised, and coached Facilities employees for Technical skills improvement and conducted Personnel Performance Appraisals on a regular periodic basis.
Bridged gaps/conflicts between higher and lower management teams and implemented Administrative Matters based on Company Policies and Standard Code of Ethics.
Planned, Lead, Organized and Coordinated various task/functions and worked collaboratively with different Teams to achieve the Department’s goal in line with the Company’s Objectives & Targets. Technological Excellence Awards:
Director’s Award: “RO Cooling water system for cooling towers” – April 2008
Outstanding Project Award: “Energy savings thru Co-Generation system” – December 2006
Director’s Award: “Fuel Quality Treatment” – December 2005
Excellent Employee Award: “Perfect Attendance” – August 2005
Director’s Award: “Lube oil extension program of Diesel Engine generator” – December 2004
President’s Award: “Evolution of price reduction of Diesel fuel oil” – December 2002 Seminars / Trainings /Career Development:
May 13, 2014 Aramco recognition for King Abdullah Sports City Project – Jeddah, KSA
May 23, 2013 Took Oath for Professional Mechanical Engineer – Al Khobar, KSA
March 26, 2013 Passed the Professional Mechanical Engineer’s Certification Exam –PRC Philippines
December 7, 2012- 22nd PSME-SA Anniversary – Dahran International Hotel, Dahran KSA
November 30, 2012- 17th Annual IIEE Chapter Convention – Le Meridien Hotel, Al Khobar KSA Page 7 of 8
October 26~27, 2012- Third Middle East Regional Conference – Abu Dhabi
October 26, 2012 – Professional Mechanical Engineer’s Thesis Presentation to BME/PRC- Abu Dhabi
July 25~26, 2012 – Professional Mechanical Engineer’s First Interview by BME – Riyadh KSA
March 12, 2012- Technical presentation on General Ventilation Design Method-Al Khobar KSA
February 24~March 16, 2012- Fire Protection & Plumbing System Design-Al Khobar KSA
January 20~February 17, 2012 –Heating, Ventilating and Air-Conditioning Design-Al Khobar KSA
October 9~10, 2011- EQIP Phase 1 Safety/Behavioral Training (Saudi Aramco-Dahran KSA)
May 29~30, 2011- Supervisory Safety Awareness Training (Saudi Aramco-Ras Tanura KSA)
November 18, 2009- HVAC Technical symposium (Trane Air-conditioning – Dammam KSA)
April 24, 2008 -Power Quality Seminar (by SCL Worldnet Inc.)
April 24, 2008- Technical conference on Power deregulation & power quality (by IIEE NL chapter)
June~November, 2007- Six Sigma Black Belt Training (by Breakthrough Management Group) o June 11~16, 2007 - Define Phase – Singapore
o July 15~20, 2007- Measure Phase – Thailand
o August 19~25, 2007 - Analyze Phase – China
o September 22~26, 2007- Improve Phase – Philippines o Nov 19~23, 2007- Control Phase – Thailand
April 18, 2006- Risk Management and Insurance Seminar (by PGA Sompo Japan Insurance Inc.)
May 27, 2005- Technical Seminars on Electrical distribution & Industrial automation (by Schneider)
February 21, 2005- Air Filtration Technology & Innovation (by ACS filtertechniek BV)
October 30, 2004- First Aid Training (by Philippine National Red Cross)
September 10~12, 2004- Maintenance Management Course (by UP National Engineering Center)
June 27, 2003- Technical Point of Firecrest (by Hitachi)
June 24, 2003- HAD structure and function (by Hitachi)
June 15, 2002- Environmental Management System Implementation and Documentation (by SNI)
June 14, 2002- Appreciation course on ISO 14001
March 19, 2002- Updates on Environmental Policies, Legislations and Processes (by DENR)
February 23, 2002- Theoretical & Practical Driving (by Southern Tagalong Driving School)
April 16, 2001- Basic of Air Filtration and Clean room (by Rexim Philippines)
March 28~30, 2001- Maintenance Management Course (by UP National Engineering Center)
March 3, 2000- HDD Head Positioning Dynamics (by Hitachi)
March 3, 2000- Fundamentals of Lubrication (by Unioil Petroleum Philippines)
February 10, 2000- Contamination Control Technology (by Hitachi)
February 8, 2000- HDD Theory of Operation (by Hitachi)
October 29~30, 1999- Effective Warehousing System (by Kaizen management System Inc)
October 25~28, 1999 - Yanmar Diesel Engine Inspection & Commissioning-Japan (by Yanmar)
August 25, 1999- Practical approach to Precision alignment (by Fixtur Laser)
May 7~8, 1999- ISO 9000 Introductory course (by TUV Rheinland)
May 12, 1999- Basic PLC application (Ohmron)
May 21~22, 1999- Establishment of preventive maintenance system (by MIRDC)
June 2, 1999- ISO 9002 Awareness programs (by Hitachi)
April 19~28, 1999- Supervisory Management and leadership training (by Hitachi)
March 2, 1999- Water treatment program (by Nalco) Page 8 of 8
February 17~18, 1999- Emergency Response (by Hitachi fire brigade)
February 1~6, 1999 (Japan)- Facility Training (by Hitachi Japan)
January 25~31, 1999 - Yanmar Industrial Engine Operation and maintenance-Japan (by Yanmar)
December 1, 1998- Electrical safety Lock out/tag out (by Hitachi)
July 11, 1998- Industrial Fire Brigade Training (by Hitachi)
June 26, 1998- Lubrication Fundamentals (by Mobil)
March 12, 1998- Stationary Diesel Engine Lubrication (by Idemitsu)
March 11~12, 1998- First Aid training (by Philippine national red Cross)
December 1~2, 1997- Hitachi Company General Orientation (by Hitachi) Note: Majority of the Trainings and Seminars and Awards listed above have supporting Certificates References:
SRACO Company- (Operation Support Services Tel. 03 843 3441)
Dallah Trans Arabia Company- (Engineering and Technical Support Services Tel. 03 872 7231)
Saudi Arabian Oil Company –ARAMCO (NAWR- Community Utility Division Tel. 03 673 3322)
Hitachi Global Storage Technologies Philippine Corp. (RESO-Facilities Dept. Tel. 632-***-**** ext. 3501) With all Honesty
Contact this candidate