CURRICULUM VIATE

PERSONAL INFORMATION:

Name : Muhammad Azhar Ali

Father’s Name : Muhammad Asghar Ali

Date of Birth : 12-06-1980

Nationality : Pakistani

N.I.C. No. : 42401-1859820-3

Contact Address : House No. K-672, Street No. 09, Sector No. 16-A,

Alkhizra Society Gulshan-e-Bahar Orangi Town

Karachi 41.

Phone No. : 006**-*******

Status : Married with one kid

E-mail : acy68v@r.postjobfree.com

QUALIFICATIONS : Diploma of Associate Engineer in

MECHANICAL TECHNOLOGY (2003)

ADDITIONAL QUALIFICATIONS:

LEEA Registered Engineer. : Registration No. 006165

Certified Lifting Equipment Inspector (Part 1 Entry) From LEEA – UK

Certified Lifting Equipment Inspector (Lifting Gear General) From LEEA – UK

Certified Lifting Equipment Inspector (Lifting Machine Manual) From LEEA – UK

Certified Lifting Equipment Inspector (Lifting Machine Power) From LEEA – UK

Certified Lifting Equipment Inspector (Runways & Light Crane Structures) From LEEA – UK

Certified Lifting Equipment Inspector (Offshore Container) From LEEA – UK

Certified Lifting Equipment Inspector (Mobile Crane Examination Advanced Programmed) From LEEA – UK

CSWIP 3.0 Visual Welding Inspector from TWI.

Rigging and Slinging from Megamas.

FA-1 SENIOR FIRST AID from Megamass.

IN-1 INCIDENT INVESTIGATION AND REPORTING from Megamass.

IMS-5 COMPETENT FRONT LINE WORKSITE SUPERVISOR from Megamass.

ISSOW LEVEL 1 from Brunei Shell Petroleum.

Competent Authorized Person (CAP)

Banksman (Level 1)

Advanced Banksman (Level 2)

Lift Planning 1 (Simple)

Lift Planning 2 (Complicated)

Person in Charge (PIC)

Non destructive Examination (NDE)

Magnetic Particle Testing ASNT LEVEL II from SETSCO training center Singapore

Liquid Penetrant Testing ASNT LEVEL II from SETSCO training center Singapore

Liquid Penetrant Testing (ASNT LEVEL –II) from Pakistan Industrial Technical Assistance Centre Government of Pakistan

Magnetic Particle Testing (ASNT LEVEL –II) from Pakistan Industrial Technical Assistance Centre Government of Pakistan

Magnetic Particle Testing (ASNT LEVEL –II) from Smith International Gulf Services

Liquid Penetrant Testing (ASNT LEVEL –II) from Smith International Gulf Services

Rotary Shoulder Connection (ASNT LEVEL –II) from Smith International Gulf Services

Drill Pipe Inspection (ASNT LEVEL –II) from Smith International Gulf Services

Driving License : Valid Brunei light vehicle Driving license

: Valid Pakistan light vehicle Driving license

PROFESSIONAL TRAINING

Safety course of eight golden rules of British Petroleum (bp) from SGS Pakistan.

Task risk assessment of British Petroleum (bp) from SGS Pakistan.

Fire fighting course from Civil Defense Karachi.

First Aid course from Civil Defense Karachi.

OSHAS 18001. Awareness, Implementation &Auditing from Adcotech Systems.

H2S Safety Awareness from SEAL International Dubai.

Permit to Work. Of British Petroleum (bp) from SGS Pakistan.

Permit to Work. (Advance Course) Of British Petroleum (bp) from SGS Pakistan.

Safety watch. Of British Petroleum (bp) from SGS Pakistan.

Personal survival technique course from Pakistan Marine Academy.

Attended SGS Safety and Task Risk Assessment.

Train the Trainer Course (safety) From British Petroleum (bp)

Advance Safety Audit of British Petroleum (bp) from SGS Pakistan

Permit to work system by PDO (Petroleum development of Oman)

Job hazard analysis by PDO (Petroleum development of Oman)

Enhance site supervision by PDO (Petroleum development of Oman)

Environmental awareness by PDO (Petroleum development of Oman)

Initial Fire Response by PDO (Petroleum development of Oman)

Basic Gas Testing by PDO (Petroleum development of Oman)

Tropical Bosiet including travel safety by boat and tropical EBS from Megamas training (Opito Approved).Brunei

HSE Familiarization from Megamas training (Opito Approved) Brunei

Defensive driving of Brunei Shell Petroleum from Megamas

ATTENDED TRAINING COURSE BY LIFTING EQUIPMENT ENGINEERING ASSOCIATION

TRAINING ON THE FOLLOWING SUBJECTS

Legislation

Standards

Code of Practice

Lifting Operation Lifting Equipment Regulation

The duty of the tester and examiner

THOROUGH EXAMINATIONS ON THE FOLLOWING

Shackles

Eye Bolts

Chain sling

Wire rope sling

Textile sling

Lifting & pulling Machines

Hand Chain Blocks

Required Standard in written and practical assessment

CAREER PROFILE

More than 3 years in Gulf experience and 4 Years in Pakistan and more than 3 year experience in Brunei in the Oil and Gas Industry working for the Leader in Conformity Assessment and Quality, The work experience covers Pakistan, Middle East and Brunei.

EMPLOYMENT RECORD

i)Period : Since June-2009 up to date

ii)Company : GERMANISCHER LLOYD OFFSHORE & INDUSTRIAL SERVICES

iii)Job Title : Lifting Equipment Surveyor

iv)Project Phase : Lifting Equipment & Lifting Loose Gears Inspections

v)Assignments/Responsibilities/Main Projects – Shell Petroleum Brunei (Secondment)

Inspection and testing of all Kinds of lifting equipment, thorough examination of lifting gears items as well as review of lift plan in shell petroleum - Brunei

-Thorough Knowledge of Brunei Shell Petroleum lifting equipment inspection and testing standard/Regulation, and international standard, Gas Cylinder regulation

-and all relevant BS, BS EN, ISO, BS EN ISO, ASME Standards for Inspection and Certification of Lifting Equipment, and ELEVATOR inspection and testing as per BS EN -81-Part 1 & 2, and JIS A 4302 (Japanese industrial standard)

-Inspection and Testing of various Lifting Equipment such as Runway Beam, Mobile Crane, Pedestal Crane, Gantry cranes, EOT Crane, Forklift, Man lift, Side Boom Crane, Davit Winch, Wire rope slings, Webbing slings, Eye Bolt, Shackles, Chain slings, A-Frame, Chain Block, Lever Hoist, Offshore Containers and various type of loose tackles used for Lifting operations.

-Inspection and Proof Load Testing of Offshore & Onshore Containers, Transportation Baskets and Lifting Tackles.

-Review and approval of documents for procurement of new lifting equipment and lifting gears for Shell Petroleum in selection based upon Project requirements.

-Carrying out Inspections and testing on diving related Equipment i.e. Personnel Baskets, etc.

-Reviewing the NDT Reports of welds on Lifting pad eyes and structure of the Onshore & Offshore Containers.

-Vehicle Inspection for various clients as per the manufacturer checklist.

-Issuing Certification and Documentation in accordance with the Relevant Shell Petroleum and International Standards.

i) Period : Since April 2008 to June 2009

ii) Company : AIB-VINCOTTE INTERNATIONAL & PARTNERS – Oman

ii) Job Title : Lifting Equipment Inspector

iii)Project Phase : Lifting Equipment & Lifting Loose Gears Inspections.

iv)Assignments/Responsibilities/Main Projects – PDO(Petroleum Development Oman)

Inspection and testing of all Kinds of lifting equipment, thorough examination of lifting gears items as well as review of lift plan and manufacturer documents prior to installation, testing and use of Lifting Appliances and Equipment.

-Thorough Knowledge of Petroleum Development Oman, AIB-Vincotte International Lifting Equipment Inspection and Testing Standard/Regulation, and International Standard, Gas Cylinder regulation and all relevant BS, BS EN, ISO, BS EN ISO,ASME Standards for Inspection and Certification of Lifting Equipment

-Inspection and Testing of various Lifting Equipment such as Runway Beam, Mobile Crane, Gantry cranes, EOT Crane, Forklift, Man lift Side Boom Crane, Davit Winch, Wire rope slings, Webbing slings, Eye Bolt, Shackles, Chain slings, A-Frame, Chain Block, Lever Hoist, Offshore Containers and various type of loose tackles used for Lifting operations.

-Inspection and Proof Load Testing of Onshore Containers, Transportation Baskets and Lifting Tackles.

-Review and approval of documents for procurement of new lifting equipment and lifting gears Equipment for Petroleum Development Oman in selection based upon Project requirements.

-Reviewing the NDT Reports of welds on Lifting pad eyes and structure of the Onshore Containers.

-Vehicle Inspection for various clients as per the manufacturer checklist.

-Issuing Certification and Documentation in accordance with the Relevant Petroleum Development Oman and International Standards.

-Maintaining full Data of periods of particular Inspections, Maintaining master list of all Lifting Gears and appliances of our principles and carry out inspection on specific time.

i)Period : Since May 2006 to April 2008

ii) Company : SMITH INTERNATIONAL GULF SERVICES - Oman

ii) Job Title : Lifting Equipment Inspector/NDT Inspector

iii)Project Phase : Lifting Equipment, Lifting Loose Gears and NDT Inspections.

iv)Assignments/Responsibilities/Main Projects – Third party inspections and certifications

Inspection and testing of all Kinds of lifting equipment, thorough examination lifting gears items, and NDT test as well as review of manufacturer documents prior to installation, testing and use of Lifting Appliances and Equipment..

- Providing Inspection Services to Major Oil & Gas Service Companies such as Dalma Energy, Midwesco, MB Petroleum services, Precision Drilling Services, United Engineering Services, Ensign Energy and Baker Hughes.

-Thorough Knowledge of Smith International Gulf Services Lifting Equipment Inspection and Testing Standard/Regulation, and International Standard, Gas Cylinder regulation and all relevant BS, BS EN, ISO, BS EN ISO,ASME Standards for Inspection and Certification of Lifting Equipment

-Inspection and Testing of various Lifting Equipment such as Runway Beam, Mobile Crane, Gantry cranes, EOT Crane, Forklift, Man lift Side Boom Crane, Davit Winch, Wire rope slings, Webbing slings, Eye Bolt, Shackles, Chain slings, A-Frame, Chain Block, Lever Hoist, Offshore Containers and various type of loose tackles used for Lifting operations.

-Inspection and Proof Load Testing of Onshore Containers, Transportation Baskets and Lifting Tackles.

-Carrying out NDT Inspections and testing of welds on Lifting pad eyes and structure of the Onshore Containers.

-Carrying out NDT Inspections and testing of BHA-drill collar, drill pipes, fishing tools, all the necessary rig parts(Rig Mast, Raising Lines, Stabbing Board, Crown Block, Drilling Hook, Traveling Block, Top Drive), and MWD (Measurement While Drilling) and LWD (Logging While Drilling) tools Shop Inspection of Casing, Tubing etc.

-Vehicle Inspection for various clients as per the manufacturer checklist.

-Issuing Certification and Documentation in accordance with the Relevant International Standards.

-Maintaining full Data of periods of particular Inspections, Maintaining master list of all Lifting Gears and appliances of our principles and carry out inspection on specific time.

i) Period : Since April 2002 to May 2006

ii) Company : PREMIER TUBULAR INSPECTION SERVICE (PTE.) Pakistan

ii) Job Title : Lifting Equipment Inspector/NDT Inspector

iii)Project Phase : Lifting Equipment, Lifting Loose Gears and NDT Inspections.

iv)Assignments/Responsibilities/Main Projects – Third party inspections and certifications

- Providing Inspection Services and audits to Major Oil & Gas Service Companies such as Oil and Gas Development Company, Oil & Gas Exploration Company, DEUTAG Drilling, LASMO Oil Pakistan, LASMO Oil Pakistan, LASMO Oil Pakistan, LASMO Oil Pakistan, British Petroleum Pakistan, Pakistan Petroleum Limited, Baker And Hughes Inteq, Hycarbex, Paige Limited, PAKISTAN EXPLORATION LIMITED, Weatherford, Schlumberger Well Services and Schlumberger Drilling & Measurement.

-Inspection and Testing of various Lifting Equipment such as Runway Beam, Mobile Crane, Pedestal Crane, Gantry cranes, EOT Crane, Forklift, Man lift Side Boom Crane, Davit Winch, Wire rope slings, Webbing slings, Eye Bolt, Shackles, Chain slings, A-Frame, Chain Block, Lever Hoist, Offshore Containers and various type of loose tackles used for Lifting operations.

-Carrying out NDT Inspections and testing of welds on Lifting pad eyes and structure of the Onshore & Offshore Containers.

-Carrying out NDT Inspections and testing of BHA-drill collar, drill pipes, fishing tools, all the necessary rig parts(Rig Mast, Raising Lines, Stabbing Board, Crown Block, Drilling Hook, Traveling Block, Top Drive), and MWD (Measurement While Drilling) and LWD (Logging While Drilling) tools Shop Inspection of Casing, Tubing etc.

-

-Maintaining full Data of periods of particular Inspections, Maintaining master list of all Lifting Gears and appliances of our principles and carry out inspection on specific time.

-

i) Period : Since January 1999 to December 2001

ii) Company : SIEMENS PAKISTAN ENGINEERING CO. LTD

ii) Job Title : Machinist - Trainee

iii)Project Phase : Trade Training.

Basic Trade Training:

Basic workshop Operation including filling, cutting, drilling, fitting, machining, reading engineering drawing and use of workshop tools.

On-the job practical training

Reading, understanding an application of engineering drawings.

Understanding and use of related measuring instruments and production tools/machines.

Understanding and application of dimensional variation like fits, tolerance, allowances, and bilateral/unilateral dimensioning system.

Hands-on training on standard machine such as lathe machine, milling machine, shaping machine, surface grinder, cylindrical grinder etc.

Hands-on training on special function machine such as key-way cutting machine, boring machine, broaching machine, dynamic balancing machine and CNC machines.

Machining of raw material (metallic pieces, steel, copper, aluminum) and that of different unfinished parts of products to finish them to specified size/shapes.

General repair/maintenance of related tools machines and instruments.

General repair/maintenance of related tools machines and instruments.

* END*

Contact this candidate