Customer Service Maintenance
Resume:
ABIOLA MAKT AGEGE LAGOS
E-mail:
************@*****.***
and
************@*****.***
Skype:wale.okunlola1
and 081********
Status- Married
DOB-06/08/1967
POB-Ogun state Nigeria
Okunlola Rasheed Olawale
Objective: The desire for challenges and been resolute in the face of possible odds by contributing to the technological advancement of the organization. Profile/Area of
specialization
More than 2 decades of progressive experience in the field of Engineering and intensive hand-on training. Have strong people management skills, open to change, have the ability to deliver results and drive through continuous improvement. Adequate knowledge of work ethics and high team spirit with good interpersonal skills to effectively communicate with other team player to achieve more. Intelligent self - starter with proven problem solving skills. Seeks and embraces challenges as learning opportunity.
REPAIRS, CALIBRATION, SERVICING, INSTALATION, AND MAINTENANCE OF PNEUMATIC AND ELECTRICAL ELECTRONICS, EQUIPMENT, MAINTENANCE SERVICING AND INSTALLATION OF ELECTRIC MOTORS BOTH AC & DC. ENGINEERING MAINTENANCVE PROJECT IMPLEMENTATION PROCESS ENGINEERING AND AUTOMATION/ISTRUMENTATION
ENGINEERING.CONTINOUS IPROVEMENT OF MANUFACTURING
EQUIPMENT,TO DELIEVER THE REQUIREMENTS OF MAINTENANCE SYSTEM TO ENSURE ALL THE EQUIPMENT OPERATES AT OPTIMUM EFFICIENCY,CONSTANTLY IDENTIFY OPPORTUNITIES &GENERATE IMPROVEMENT IDEAS IMPROVE THE EFFECTIVENESS OF THE MAINTENANCE SYSTEM TO DELIEVER EQUIPMENT RELIABILITY TARGETS. ENSURE COMPLIEANCE WITH ALL SPECTS OF BEST MANAGEMENT STANDARDS.
PROCESS CONTROL INSTRUMENT SUCH AS PROGRAMMABLE LOGIC CONTROLLER PNEUMATIC & ELECTRONICS CONTROLLERS, CYLINDERS, AND PNEUMATIC & ELECTRONICS TRANSMMITTERS.EXPERIENCE IN COMPUTERISED MAINTENANCE MANAGEMENT SYSTEMS.FULL
ANDSOUND UNDERSTANDING OF ALL ASPECTS OF SOFTWARE
PROGRAMMING OF CONTROL SYSTEMS. SUCH AS SIEMENS S5/S7,WINCC SCADA,WINCCB,DCS,MITSUBISHI,ALLEN BRADLEY AND OMRON PLC’S.FLEXIBLE HMI,PROTOOL HMI,PROFIBUS ÐERNET NETHWORKS, PC BASE SCADA SYSTEMS& PROCON GL CARDSCONTROL VALVE, ACTUATOR, MEASURING INSTRUMENTS SUCH AS PH, RESISTANT THERMOMETER THERMOCOUPLE CONDUCTIVITY, PYROMETER, FLOW METERS, FLOW TRANSMITTER, DEHUMIDIFIER AND
DECOLOURISER..COMMISSIONING, REPAIRS AND PLANT PREVENTIVE MAINTENANCE ON EVAPORATING PLANT,,FILTRATION PLANT, MILLING PLANT, ULTRALFILTRATION PLANT, ION EXCHANGE RESIN PLANT, COUNTING MACHINE ANDWEIGHING MACHINE, BAGGIING
MACHING,AMACHINE,EVAPORATING,CENTRIFUGAL MACHINE, TURBINE POWER SUPPLY.BOILER STEAM GENERATOR, COMPRESSOR MACHINES,KRONES,KHS, SIDEL AND KISTER PROCESSING,PACHAGING,FILLING,LABELLING,SHRINKWRAPPING AND PALLETISING/DEPALLETISSING MACHINES
TASK::PLANT PREVENTIVE MAINTENANCE (PPM)
BUSINES CENTRED MAINTENANCE (BCM)
MAINTENANCE REPAIRS AND OPERATION (MRO)
MATERIALS REQUIREMENT PLANNING (MRP)
PLANT PREDICTIVE MAINTE NANCE (PDM)
COMMON MAINTENANCE SYSTEMS (CMMS)
COMPETENCY ACQUISITION PROCESS (CAP)
PROFIT IMPROVEMENT PROJECTS (PIPS )
WORLD CLASS MANUFACTURING (WCM)
FAILURE MODE EFFECT OF CRITICAL ANALYSIS (FMECA)
Experience:
2015 to date PERFETTI VAN MELLE NIG LTD(AGBARA OGUN STATE) SENIOR EXECUTIVE ELECTRICAL
Manage the day to day activities of Automation, Instrumentation, Electrical, Process, Packaging, Project, Facilities, and Utility equipment’s
Responsible for the effective management of Unit variable cost and has significant impact on spare parts/maintenance cost, capacity and overhead cost. For the unit
Responsible for constantly reducing spare parts/maintenance cost, while maintaining high quality and delivery in a highly unionized working environment.
Manage full unit responsibility including direct responsibility for developing, coaching, and supporting team members and directly overseeing maintenance activities.
Interact with other unit managers, factory manager, packaging manager, store manager, engineering and supply planning to ensure target volumes are achieved cost effectively and on time.
Responsible for the delivery of production outputs, targets and goal by managing, leading and supporting production team to produce in a safe manner to desired customer service, quality, and yield levels in the most cost effective and efficient manner.
Adhere and enforce all PERFETTI VAN MELLE safety policies and procedures to achieve zero harm for all safety areas, health, environment, hygiene to ensure safe and efficient operating environment. Utilise and apply safe systems of working and pro-actively seek opportunities to improve work environment.
Manage, prioritise and validate all activities of team workers by process confirmation, including safety, quality, operational, personnel, and administrative tasks.
Control cost of packaging by minimizing process waste, maximizing efficiencies, and taking appropriate actions to reduce downtime and improve quality.
Develop and deliver improved performance against targets through effective problem solving, decision making and communication between team, and aligned, planned activity with operations improvement team, spare parts engineering support and manufacturing supply chain
Plan and executes maintenance schedules to maximize operational equipment efficiency.
Manage materials, manpower, and production machinery effectively with full responsibility.
Manage the production section using OEM customized software as supervisors (Process line controllers).
Manage and direct Maintenance control workflow using coordinated weekly/monthly maintenance plans and oversight of Production Control, Materiel Control, and Work Centre Superintendents
Actively encourage team members to freely report actual and potential variations in quality.
Contribute to the production planning process, and Make recommendations for improvements.
Participate actively in all 5S, WCM, and TPM activities and training the workforce to conform to WCM order.
Prepare and/or collates all documents relating to maintenance downtime figures so as to draw reasonable and pro-active m maintenance future plans.
Constantly address all maintenance bottlenecks so as to achieve daily/weekly/monthly production targets
Ensure work activities consistently meet quality, safety, cost and delivery specification..
2012 to 2015 FLOUR MILLS PLC (Golden Pasta Division) Instrumentation/Electrical Manager(Head of Unit)
Manage the day to day activities of Automation, Instrumentation, Electrical, Process, Packaging and Utility equipment’s
Responsible for the effective management of Unit variable cost and has significant impact on spare parts/maintenance cost, capacity and overhead cost. For the unit
Responsible for constantly reducing spare parts/maintenance cost, while maintaining high quality and delivery in a highly unionized working environment.
Manage full unit responsibility including direct responsibility for developing, coaching, and supporting team members and directly overseeing maintenance activities.
Interact with other unit managers, factory manager, packaging manager, store manager, engineering and supply planning to ensure target volumes are achieved cost effectively and on time.
Responsible for the delivery of production outputs, targets and goal by managing, leading and supporting production team to produce in a safe manner to desired customer service, quality, and yield levels in the most cost effective and efficient manner.
Adhere and enforce all Golden Penny Floor Mills safety policies and procedures to achieve zero harm for all safety areas, health, environment, hygiene to ensure safe and efficient operating environment. Utilise and apply safe systems of working and pro-actively seek opportunities to improve work environment.
Manage, prioritise and validate all activities of team workers by process confirmation, including safety, quality, operational, personnel, and administrative tasks.
Control cost of packaging by minimizing process waste, maximizing efficiencies, and taking appropriate actions to reduce downtime and improve quality.
Develop and deliver improved performance against targets through effective problem solving, decision making and communication between team, and aligned, planned activity with operations improvement team, spare parts engineering support and manufacturing supply chain
Plan and executes maintenance schedules to maximize operational equipment efficiency.
Manage materials, manpower, and production machinery effectively with full responsibility.
Manage the production section using FAVA and PAVAN customized software as supervisors (Process line controllers).
Manage and direct Maintenance control workflow using coordinated weekly/monthly maintenance plans and oversight of Production Control, Materiel Control, and Work Centre Superintendents
Actively encourage team members to freely report actual and potential variations in quality.
Contribute to the production planning process, and Make recommendations for improvements.
Participate actively in all 5S, WCM, and TPM activities and training the workforce to conform to WCM order.
Prepare and/or collates all documents relating to maintenance downtime figures so as to draw reasonable and pro-active m maintenance future plans.
Constantly address all maintenance bottlenecks so as to achieve daily/weekly/monthly production targets
Ensure work activities consistently meet quality, safety, cost and delivery specification..
2011-2012 Nigeria Bottling Company(coca cola) Iddo House Oyingbo, LAGOS NIGERIA
AUTOMATION SYSTEM AND CONTROL ENGINEER(Head Office)
Responsible for all 13 plants Automation/Instrumentation system and control, brake down, Installation, commissioning, recapitalization of equipment, intervention,5000 hours maintenance in both the RGB and One Way pack
Managing OEM embedded Automation/Electrical Engineer on intervention, Commissioning, Recapitalization and plan maintenance
Responsible for all the 13 plants PLC’s software backups and upgrading
Take ownership and responsibility for ensuring delivery of high quality products to the consumers
Ensure adherence to customer service levels by developing effective relationships with appropriate vendors.
In concert with PMO, develop and maintain standardized performance indicators to track and report against production goals using automated systems to the maximum extent possible
Lead root cause analysis investigations with team to ensure recommendations are made in a satisfactory time frame 2008 to 2011 BUA SUGAR REFINERY,Tincan Apapa Lagos Instrumentation and control system Engineer
Manage the day to day activities of the process plant maintenance in accordance with the safety, quality and environment standards of the company.
Supervise, priorities and co-ordinate all maintenance and brake down activities of shift team workers, including operational, personnel, and administrative tasks to ensure that all maintenance and brake down equipment are meet to achieve target volumes and specifications with best possible efficiencies and optimum KPI”s.
Control cost of spare parts usage by minimizing spare parts wastes, maximizing efficiencies and taking appropriate actions to reduce downtime and improve quality.
Receives and control the use of equipment running parts with full responsibility and accountability.
Increase equipment OEE and develop training module for the subordinate. Track all the equipment brake down and take the full responsibility of the equipment availability
Reduce of downtime due to equipment failure and brake down
Constantly address all production bottlenecks so as to achieve daily/weekly/monthly production targets.
Maximize production output per employee thro work-study, industrial engineering and line balancing.
Ensure all the needed spare parts are provided
Reduce to the best minimum, all form of down time by ensuring that daily, weekly, and monthly maintenance activities are accurately done.
Provide feedback to team members in all the things most likely to maintain and improve performance.
Promptly identify poor performance / unacceptable behavior and bring it directly to the attention of the team member concerned.
Actively encourage team members to freely report actual and potential variations in quality and down time
Contribute to identifying the training needs for the teams and individuals.
Contribute to the performance reviews of team members
Ensure work activities consistently meet quality, safety, cost and delivery specification.
Motivate team members towards the achievement of planned work and dates.Relate with key members of the organization relevant to the achievement of set targets.
Participate actively in all 5S and WCM, TPM, FMECA activities and training the workforce to conform to WCM order.
Responsible for the conduct of team members.
Lead implementation of the company’s health, safety, quality, and environment and hygiene standards for the protection of company products, personnel and assets.
Managing all the Maintenance of plant equipment-such as pasta process lines, cheese balls lines Noodles lines, utility equipment and all the packaging and measuring equipment
Responsible for all the PLC/software backups, Manage new equipment installation and commissioning, responsible for company’s maintenance history data base, spare parts inventory, spare parts ordering preventive, predictive, corrective maintenance using SAM
software
2006-2008 Coca Cola Nig and Equatorial Otta Ogun State Maintenance Engineer
DUTIES: PLANT PREVENTIVE MAINTENANCE, FACILITIES GENERAL MAINTENANCE PRACTICE, ANCHOR TIMELY//QUALITATIVE EXECUTION OF CAP’S AND GMP.PROCESS /UTILITIES EQUIPMENT, LEADING TEAM ON PROCESS IMPROVEMENT OPPORTUNITIES, DEVELOPMENT OF ELECTRONICS DATABASE FOR UPDATING EQUIPMENT MAINTENANCE RECORDS.ASSET REGISTER AND EQUIPMENT HISTORY,INSTALLATION AND COMMISSIONING OF PLC BASE PROJECT.PROVIDING SUPPORT ON CALIBRATION PROGRAMME FOR EFFECTIVE AND TIMELY IMPLEMENTATION.
1993-2006,Cadbury Nigeria Plc Agidingbi Ikeja Lagos Instrumentation Team Leader
REPAIRS, CALIBRATION, SERVICING, INSTALATION AND MAINTENANCE OF PNEUMATIC
& ELECTRICAL ELECTRONICS EQUIPMENT, MAINTENANCE SERVICING AND INSTALLATION OF ELECTRIC MOTORS BOTH AC AND DC. TRANSFER PUMPS, FAMILIAR WITH SCADA MONITORING CENTRAL CONTROL ENVIROMENT. EXPERIENCE ON SIEMENS(SYSYTEM 5 & SYSTEM 7) OPERATOR PANEL 20&25, MITSUBISHI MELSECPLC PROCESS CONTROL INSTRUMENT SUCH AS PROGRAMMABLE LOGIC CONTROLLER PNEUMATIC & ELECTRONICS CONTROLLERS, CYLINDERS, PNEUMATIC & ELECTRONICS TRANSMMITTERS AND SCADA MONITORING 1997-1998 Cadbury Nigeria PLC
National Youth Service Corpse (NYSC)
Education:
1980-2016
Master in Business Administration in view
2016.Lagos State University
Licentiateship of City and Guilds of London
2005
Full Technological Certificate of City and Guilds of London Institute, 2001
Final City and Guilds of London Distinction in chemical composition,1997
Part 1 and 2,City and Guilds of London Institute 1990 - 1996 WAEC Papalanto High School Papalanto Ogun state
1980 - 1985
Awards
received
Seminar
Attended:
Training
Attended
CADBURY NIGERIA PLC 2003 CRATIVITY AWARD WINNER
CADBURY NIGERIA PLC 1997 PERSONAL ACHIEVEMENT AWARD WINNER
Occupational safety and health in the workplace
Total productive maintenance (TPM)
Single minute exchange die (SMED) in the workplace
Leadership in the workplace
World Class Manufacturing Excellence (WCM) (5S)
Good manufacturing practice (GMP)
Prevention of Industrial accidents and HIV-AIDS in the workplace.
Work attitude and Productivity improvement.
Supervisory skills for managers and team leaders
Team building skills for managers and supervisors ADVANCE AUTOMATION COURSE KRONES OGBA LAGOS 2011
GENERAL ELECTRICAL MAINT KRONES OGBA LAGOS 2011
BOILER MAINTENANCE IIT ISHERI LAGOS 2010
Association
Hobbies
Reference:
GENERAL ELECTRICAL MAINT IIT ISHERI LAGOS 2009
AUTOMATION AND CONTROL ENGLAND LONDON 2006
ELECTRO-PNEUMATICS CONTROL IIT OGBA LAGOS 2005
MAINTENANCE AND CONTROL MILAN ITALY 2003
MAINTENANCE ENGINEERING TEXACO NIG PLC 1999
MAINTENANCE OF ELECTRICITY CN PLC 1998
PROCESS MEASUREMENT AND CONTROL CN PLC 1997
BUSINESS SKILL DEVELOPMENT COURSE CN PLC 1994
PREVENTIVE MAINTENANCE WORKSHOP CN PLC 1994
Member Institute of Leadership management United Kingdom Licentiateship member institute of City &Guilds of London institute UK TRAVELLING, MUSIC, READING, GOLF AND FOOTBALL.
On request
Contact this candidate