RANZEL ROSTRATA

*** ********* **. ****** ** ***33 acxyej@r.postjobfree.com 805-***-****

Education

Bachelor of Science in Electrical Engineering June 2006- October 2010

Far Eastern University – Institute of Technology Manila, Philippines

Summary

A hardworking and motivated Electrical and Instrumentation Engineer seeking a position in a reputable, progressive, and diverse organization where my skills can be beneficial and put to good use. Fast learner and can easily grasp new ideas and knowledge in a short span of time with minimal supervision. Does work with dedication, passion and willingness to learn new concepts and technology to increase efficiency and competency in job implementation.

Highlights

Instrument and Electrical Maintenance

Project Management

Materials Management

Plant/Refinery Shutdown and Startup

Startup and Commissioning

FAT/SAT

Construction Supervision

Detailed Design

Technical Plan Execution

Document Control

Experience

Instrument and Electrical Mechanic July2015 to November2016

Royal Dutch Shell Batangas City Philippines

Philippines Shell Petroleum Corporation – I/E Maintenance Department

Good knowledge about Permit to work systems and several kinds of permits like Cold work permit, Hot work permit, and limited Space Entry permit.

Familiarity about several kinds of hazard involved in work area and essential safety measure to be done for the safe work.

Capacity to do job by following Safety rules & regulations.

Experienced in the oil and gas refinery instrument maintenance, instrument calibration and commissioning.

Effective knowledge of the lock out and tag out process.

Operational knowledge in a Fire and Gas Systems like HC Detectors & UV, H2S Detectors, Smoke Detectors.

proficient in Installation & Calibration of different types of the Modern Smart Electronics & Pneumatic instrument.

Capable of Inspection, overhaul, repair and calibrate instruments and control devices.

Knowledge of the Bently Nevada Vibration Monitor system.

Skilled to read Engineering Drawings, Loop Diagrams, P&ID Drawings, Logic Diagram & Hook up drawings.

Involved in startup/shutdown team for turnaround of the plant.

Expert at Enraf tank level gauging system, maintenance of tank, commissioning of tank instrument and using of 847 portable enraf terminal

Safety Sub-com officer

24hrs on call duty in case of instrument breakdown, LOTO activities and during startup/shutdown of the plant

Checking and maintenance on site of Electrical activities, process controls, calibration due date and instrument transmitters/systems.

Project Engineer / DCS Hardware Engineer January2015 to June2015

Yokogawa Philippines Inc. Batangas City Philippines

PSPC DCS Modernization Project Ph. 2 and 3 (Process A and B)

Supervised, managed and planned site works

Prepared hot and cold cutover from old system to new system

Managed and updated the materials needed in project execution

Generated daily, weekly and monthly project update as requested

Lead the troubleshooting team and installation team

Monitored and checked all installation made by 3rd party contractor

Maintained and secured the project team high safety performance standards and regulatory compliance at all times

Prepared detailed project schedules and managed to meet completion deadlines

Worked with various disciplines, including drafting, to complete detailed designs, including P&IDs, Plot Plans, Cutover’s files, Electrical documents, Instrument loop diagrams, etc.

Lead Project Engineer at SAT

Engineered all related instrumentation and electrical works related to the project.

Project Engineer / DCS Hardware Engineer May2012 to December2014

Yokogawa Philippines Inc. Batangas City Philippines

PSPC DCS Modernization Project Phase 1 (Oil Movements)

Conducted site surveying and gathering of technical data related to future projects.

Designed the Marshalling DI/DO and AI/AO Cabinet, Overall Signal Flow Diagram, and Earthing scheme

Designed the Hardware Functional Design Specification, Earthing scheme, Console Design and Overall Signal Flow Diagram.

Managed the overall quality, standards and submission of Yokogawa documents under project scope.

Reviewed subcontractor submissions and issued Permit to Work to subcontractors.

Conducted inspection and testing of field instruments.

Prepared cabinet bill of materials, as built documents and transmittal for client review.

Supervise site check/verification

Managed and provided instructions to designers and draftsmen and reviewed drawings for submission.

Reviewed and implemented Shell DEP standards/job specification.

Prepared engineering documents for government submission and construction.

Designed instrumentation system layouts, loop diagrams, instrument cable schedules, data sheets, instrument index sheets, I/O lists, installation drawings, etc.

Supervised panel component requisition and panel fabrication.

Conducted panel FAT, SAT and Instrument Loop Checking.

Conducted hot-cutover, startup and commissioning of Shell Phase 1 project.

Coordinated with the end user for clearing technical clarifications, punch lists and implementing site modifications.

Checked and updated hardware as built documents

Assisted in project handover checked and updated hardware as built documents.

Site Engineer/Instrument and Electrical Technician July2011 to March2012

R Square Consolidated Services Corp. Sorsogon City, Albay Philippines

BACMAN Geothermal Power Plant (Energy Development Corporation) Revamp Project

Took responsibility for service activities at site installation/commissioning. Duties included planning profitability and matters relating to the efficient running of the project at site level.

Worked with the customer support to deliver efficient and timely organized service calls for commissioning, repair and training along with the system team.

Engineered construction and commissioning of geothermal plant

Controlled and maintained calibration of measuring and testing equipment.

Monitored the geothermal power plant preventive maintenance (Repair, fault finding, installation, calibration, line checking, loop checking, functional testing and commissioning. Replacement of faulty instruments and adjustments of plant instrument such us setting of pressure, temperature, level and flow transmitters with analog output, also HART protocol type)

Studied plans, drawings, specifications, and work orders to determine work requirement and sequence of repairs and/or installations.

Proficient in Engineering Control System I/O List, Logics, P&IDs Development. Review of P&IDs, Equipment Specifications, Instrument Applications, Instrument Index, Control Panels, Junction Boxes, Cable Tray Routings Drawings, Control Room Layouts Drawings, Hook Up Drawings, Cause and Effect Drawings, and Field Wiring Diagram.

Worked with the client for inventory of instruments and fittings.

Expertise in Hot Works, Energy Isolation, Confined Space and Scaffold Erection.

Involved in punch clearing such as repair, fault finding, line checking, loop checking and commissioning.

Training and Seminar

Shell Trainings

-Shell Code of conduct, Application of MOS and OOS, Proper use of Breathing Apparatus, Carry out gas testing, Carry out material sampling, Confined space work, conflict of interest in business line, Controlling static electric hazard, fatigue self-management, Shell Golden rules, introduction of fatigue, IPF component testing, Isolate and De-Isolate Electrical Equip, Permit to work (Sentinel and E-vision), Safe isolation of plant and equipment, Safeguarding information, Simple lifting, rigging and slinging, Use of nitrogen, Working around h2s hazards,

Working at height and Works with safeguards and interlocks

Tricon System Configuration & Implementation, Singapore, March 21-24 2016

Yokogawa DCS Centum VP training

Shell Road Safety & Defensive Driving June 26-27, 2014

HSSE Leadership for front line supervisors course, May 12-13, 2014

Shell training for Safety Audit Analysis, May 8, 2014

Training for competent person for Hot works, Energy Isolation, Confined Space and Scaffold Erection, Bacman Geothermal Power plant, January 09-13, 2012

Seminar in National Grid Corporation of the Philippines, Transco San Manuel, November 19, 2009

Leadership Seminar, Training, Planning and Teambuilding Workshop Enhancing campus leadership (Vice-Chairman for external Electrical Engineering Student Association), Conflict Management and Community Involvement, Caliraya Recreation Center Lumban Laguna, May 23-25, 2008

Knowledge, Technical Skills and Abilities

Tools, equipment, and materials common to the electrical trade.

Applicable electrical codes, standards, and regulations.

Electrical application for high and low voltage electric system.

Skills in the installation, repair and maintenance of all types of electrical system equipment and components.

A thorough understanding of Control and Instrumentation

Hands on in instrumentation and electrical experience and ability to read/produce electrical schematics and ILD’s

AutoCAD

Calibrating field instrument

Testing and commissioning field instrumentation

Hot and Cold cutover

Basic First Aider

Microsoft Office MS Word, MS Excel, MS Power Point and Microsoft Outlook

Yokogawa DCS Centum VP Parameter Management

Triconex PLC - TriStation 1131

Enraf Level gauge Honeywell

847 Portable Enraf Terminal

Contact this candidate