Full Time Electrical
Resume:
LEVI A. FAY
CASPER, WY *****
Phone: 307-***-****
acxya8@r.postjobfree.com
Objective
I am a self-motivated hard worker, who would like to work for a company; that will allow me to utilize my skills, experience and training to the highest level.
Ability Summary
-Accurately Read and Interpreted Construction Prints
-Operate and Use all Basic Hand and Power Tools
-Customer Service Oriented
-Operate a Personal Computer
-Fiber Optic and Telecommunication Installation and Repair
-Excellent Technical and Mechanical Troubleshooting
-Installation and Repair of Complex Electrical Circuits
-Operate a Fork Lift
-Train and Organize New Hired Employees and Apprentices'
-Recognize and Correct Job Hazards and Unsafe Conditions
-Safety Trained in proper Tower Climbing Procedures
- Bend, Cut, Ream, and Fabricate conduit and wire raceway.
- Certified in Hazardous location Safety. Safety work in areas with flammable vapors
gasses, and filings.
- Highly trained in extensive safety procedures,
- Inspect, create, present and evaluate a JSA
Employment History
Instrumentation Technician/ Journeyman Electrician
01/2014 - 01/2015
BHI CO
Vernal, UT
Employment Type:
Full Time (35 Hours or More)
Repair, test, adjust, or install electronic equipment, such as industrial controls, transmitters, and antennas.
Install Power generators and Wiring to energize electrical control, measuring instruments, and relay controls.
Bend and install conduit and cable tray.
Install Heat trace for anti-freeze protection of plumbing and pipework
Follow instructions and coordinate with Journey management and other crew members for proper installation of control circuitry and devices
Install grounding systems for lightning and equipment protection.
Install Photovoltaic equipment for backup power and charging systems
Mentor and teach Apprentices and New hired employees for efficient and proper control and instrumentation circuitry
Planned layout and installation of electrical wiring, equipment, or fixtures, based on job specifications and local codes.
Connected wires to circuit breakers, transformers, or other components.
Tested electrical systems or continuity of circuits in electrical wiring, equipment, or fixtures, using testing devices, such as ohmmeters, voltmeters, or oscilloscopes, to ensure compatibility and safety of system.
Used a variety of tools or equipment, such as power construction equipment, measuring devices, power tools, and testing equipment, such as oscilloscopes, ammeters, or test lamps.
Inspected electrical systems, equipment, or components to identify hazards, defects, or the need for adjustment or repair, and to ensure compliance with codes.
Prepared sketches or follow blueprints to determine the location of wiring or equipment and to ensure conformance to building and safety codes.
Diagnosed malfunctioning systems, apparatus, or components, using test equipment and hand tools to locate the cause of a breakdown and correct the problem.
Worked from ladders, scaffolds, or roofs to install, maintain, or repair electrical wiring, equipment, or fixtures.
Advised management on whether continued operation of equipment could be hazardous.
Maintained current electrician's license or identification card to meet governmental regulations.
Journeyman Electrician
08/2013 - 12/2013
Satellite Systems & Solutions
Glenrock, WY
Employment Type:
Full Time (35 Hours or More)
Planned layout and installation of electrical wiring, equipment, or fixtures, based on job specifications and local codes.
Connected wires to circuit breakers, transformers, or other components.
Tested electrical systems or continuity of circuits in electrical wiring, equipment, or fixtures, using testing devices, such as ohmmeters, voltmeters, or oscilloscopes, to ensure compatibility and safety of system.
Used a variety of tools or equipment, such as power construction equipment, measuring devices, power tools, and testing equipment, such as oscilloscopes, ammeters, or test lamps.
Inspected electrical systems, equipment, or components to identify hazards, defects, or the need for adjustment or repair, and to ensure compliance with codes.
Prepared sketches or follow blueprints to determine the location of wiring or equipment and to ensure conformance to building and safety codes.
Diagnosed malfunctioning systems, apparatus, or components, using test equipment and hand tools to locate the cause of a breakdown and correct the problem.
Worked from ladders, scaffolds, or roofs to install, maintain, or repair electrical wiring, equipment, or fixtures.
Advised management on whether continued operation of equipment could be hazardous.
Maintained current electrician's license or identification card to meet governmental regulations.
Wind Turbine Technician
05/2012 - 08/2013
UpWind Solutions
Medford, OR
Employment Type:
Full Time (35 Hours or More)
Inspected, diagnosed, adjusted, or repaired wind turbines.
Perform maintenance on wind turbine equipment including resolving electrical, mechanical, and hydraulic malfunctions.
Monitored SCADA after hours to ensure proper operation of Wind Turbines and Wind park.
Maintained vehicles, tools and equipment used to maintain Wind Turbines.
Trained and supervised newly hired employees.
Climbed Wind Turbines to perforce work.
Observed and practice stringent safety practices
Journeyman Electrician
06/2005 - 04/2012
Casper Electric
3150 E Yellowstone Hwy, Casper, WY
Employment Type:
Full Time (35 Hours or More)
Planned layout and installation of electrical wiring, equipment, or fixtures, based on job specifications and local codes.
Connected wires to circuit breakers, transformers, or other components.
Tested electrical systems or continuity of circuits in electrical wiring, equipment, or fixtures, using testing devices, such as ohmmeters, voltmeters, or oscilloscopes, to ensure compatibility and safety of system.
Used a variety of tools or equipment, such as power construction equipment, measuring devices, power tools, and testing equipment, such as oscilloscopes, ammeters, or test lamps.
Inspected electrical systems, equipment, or components to identify hazards, defects, or the need for adjustment or repair, and to ensure compliance with codes.
Prepared sketches or follow blueprints to determine the location of wiring or equipment and to ensure conformance to building and safety codes.
Diagnosed malfunctioning systems, apparatus, or components, using test equipment and hand tools to locate the cause of a breakdown and correct the problem.
Worked from ladders, scaffolds, or roofs to install, maintain, or repair electrical wiring, equipment, or fixtures.
Advised management on whether continued operation of equipment could be hazardous.
Maintained current electrician's license or identification card to meet governmental regulations.
Data Communications Technician
09/2003 - 05/2005
Information Systems Consulting Inc.
Casper, WY
Employment Type:
Full Time (35 Hours or More)
Installed, set-up, rearranged, or removed switching, distribution, routing, and dialing equipment used in central offices or head/ends.
Service or repair telephone, cable television, internet, and other communications equipment on customers' property.
Installation of Structured Cabling in buildings.
Installed and maintained Fiber Optic Cabling
Terminated and installed Fiber Optic connectors and adapters
Spliced and diagnosed Fiber Optic communication failures
Low Voltage Technician/ Smart Systems Installer
04/2002 - 09/2003
Comtronix
800 W Collins drive, Casper, WY
Employment Type:
Full Time (35 Hours or More)
Installed and Repaired Complex Security, Fire, and Automation Systems.
Diagnosed failures of equipment and performance of Complex Security, Fire, and Automation Systems.
Interpreted construction blue prints and plans.
Advised customer and sold equipment used for better performance of these systems.
Supervised and trained newly hired Employees.
Fiber Optic Installer
07/2001 - 01/2002
Fiber Flow/Arguss Communications Gr
Woodenville, WA
Employment Type:
Full Time (35 Hours or More)
Foreman
03/2001 - 05/2001
Aqua Terra Construction & Engineering
Gulfport, MS
Employment Type:
Full Time (35 Hours or More)
Planning cabling installation routes. Organizing operation of cabling installation. Managing personnel. Organizing traffic control. Training new employees.
Fiber Optic Cable Installer
12/1999 - 02/2001
J&V Communication Services
Employment Type:
Full Time (35 Hours or More)
Superintendent
09/1999 - 12/1999
Northern Line Layers
Billings, MT
Employment Type:
Full Time (35 Hours or More)
Parts Clerk
04/1999 - 09/1999
Harley Davidson of Casper
Casper, WY
Employment Type:
Full Time (35 Hours or More)
Assistant Foreman
02/1999 - 08/1999
Cannon Group Communications
Desota, TX
Employment Type:
Full Time (35 Hours or More)
Fiber Optic Installer
09/1998 - 02/1999
Gilbert Western
Denver, CO
Employment Type:
Full Time (35 Hours or More)
Education and Training
Issuing Institution
Location
Qualification
Course of Study
KWHS
WY
High School Diploma
General Studies
State of WY
Casper, WY
Vocational School Certificate
Electrical Code and Installation
Occupational Licenses & Certificates
Certification Title
Issuing Organization
Completion Date
Expiration Date
Overhead Crane Operations
Casper Safety L.L.C
08/2012
OSHA 10 General Industry and Health
OSHA
05/2012
Wind Competent Tower Climber & Rescue
Tech Safety Lines
05/2012
First Aid, CPR, AED
American Heart Association
05/2012
05/2014
NFPA 70E
OSHA Campus
05/2012
Journeyman Electrician
State of WY
01/2009
01/2018
LV Technician General
State of WY
12/2004
Category 5,5e,6, 6a Technician
RWM Fiber Optics
02/2004
Structured Cabling Installer
Panduit
02/2004
Fiber Optic Installer
RWM Fiber Optics
02/2002
References Available on Request
Contact this candidate