Sales Engineer

Mr. Joel R. Flores

Dama de Noche St, Katipunan Village

Western Bibutan, Taguig, Philippines

Philippine Mobile No.: +63-928******* / +63-915-*******

e-mail address: acxu74@r.postjobfree.com / acxu74@r.postjobfree.com

EXPERIENCE SUMMARY:

Had Fourteen (14.0)-years of progressively responsible experience in Engineering, Procurement & Construction (EPC) Projects, such as in Front-End-Engineering Design (FEED) for Oil and Gas, Turn-around, Total Plant Shut-down, Revamp & Tie-Ins, Construction, Commissioning Stage, Mechanical Static/Rotating Equipment installations and Lay-out for Modularization for Oil & Gas Projects such as Greenfield, Brownfield Plant Projects with strong background in Steam Engineering, Piping & Pipeline Engineering.

Experience in Project Proposal & Tendering, Scheduling, Involve in Project Estimates (Bill of Quantities, BOQ) for Oil and Gas Projects & Piping Bulk MTO. Participate in FEED/FMEA and EPC Design/Model Review and Field Engineering activities.

Experience working on Piping & Supports, Piping Stress Analysis, Piping & supports fabrication & Project Design: In-Plant Piping Design (Detailed Engineering) & Lay-outs (Black Utilities: Steam & Condensate Lines, Chilled Water System), Cryogenic Piping for Cleanroom, Power Plant, Chemical, Refinery, Fertilizer Plant, Petrochemical, Pharmaceutical, Wafer Fab Projects & Industrial Gases, Fire & Water Tube Boilers for clients such as Saudi Aramco, Saudi Basic Industries (SABIC), Saudi Electric Company (SCECO), PetroVietnam, Canadian Oil Sands, Repsol, Eni Agip and Micron - Singapore.

Sales experience for products as follows: Spirax-Sarco, Forbes Mashall, Cochran Rolls-Royce Boilers. Had hands-on experience in AutoCAD 2015, Microstation VJ, MS Office 2007 and 3D modeling Intergraph’s SmartPlant 3D (SP3D) 2011 R1 and operation of SmartPlant Review (SPR) Version 10.0.

Involve in large scale projects in overseas assignment (Middle East, Libya, Singapore & Vietnam), as Piping Engineer in Site Supervision/Field Engineering activities - Construction & Piping Design Engineer for Design Office Center.

SUMMARY:

M+W Singapore Pte., Ltd., Senior Process Supervisor II, July 2015 – September 2016

KBR Singapore Pte., Ltd., Senior Piping Designer/Piping Checker,

December 2013-January 2015, Singapore Operating Center.

J & S Consultancy Services Co., Inc., Engineering Center, Piping Designer - SP3D,

January 2013 – July 2013

Samsung Engineering Saudi Arabia Co., Ltd., Engineering Center (IK-EPC Projects), Samsung Naffora Techno Valley, Al-Jubail - Kingdom of Saudi Arabia,

Piping Design Engineer / Tender Engineer, June 2011- June 2012.

Ferrostaal Industrieanlagen GmbH (formerly: MAN Ferrostaal Oil & Gas, Ltd.), Engineering Head Office - Libya, Piping Engineer / Tender Engineer, June 2009 – March 2011.

Tecnicas Reunidas, S.A./Technip Consortium, Oil & Gas, Dung Quat Refinery - Vietnam, Piping Engineer, July 2007- December 2008.

Al Suwaidi Industrial Services Co., Ltd., Oil & Gas, Yanbu Refinery, Saudi Aramco - Kingdom of Saudi Arabia, Piping Engineer, September 2004 – September 2006.

ARCC & Engineering Equipment, Inc., Ltd., Oil & Gas, Kingdom of Saudi Arabia,

Junior Piping Engineer / Estimate Engineer, March 2001 – July 2004

Steam Systems Phils., Inc.,Assistant Sales Staff/Technical Engineer, June 1999-August 2000

EMPLOYMENT EXPERIENCES:

M+W Singapore Pte., Ltd.

Position: Senior Process Supervisor II

Department Assign: Engineering & Construction

Period: July 2015 – September 2016

Address: #02-00, International Business Park, Singapore 609929

Job Description:

a.Involve in Project Management, Planning, Scheduling & Execution.

System handles: Chilled Water System, Compress Dry Air (CDA) Plant & Distribution, Bulk Gases System.

b.Reviews Tender & Contract Documents as per project specifications & Micron Standards and required design basis.

c.Provide timely regular provide progress report, reviews Capital Expenditures (CAPEX) costs base from Scope of Work (SOW) as determined in Bid Contract.

d.Participate in Tendering & Kick-Off meeting with the Clients & Sub-contractors.

e.Reviews sub-contractor detailed engineering, shop drawings and IFC drawings.

f.Supervised respective subcontractors line managers as per Scope of Work/Contract.

g.Supervision in Equipments installations, piping fabrication and erection such as (Cryogenic/non- Cryogenic Piping systems).

h.Supervision in Hydrotest, Reinstatement till commissioning period.

i.Provide technical support in both Engineering & Construction Departments.

j.Squad check of vendor drawings & reviews engineering deliverables.

k.Reviews Method of Statement/Procedures & Risk Assessment, Test Packages, Hydrotest circuit diagram & identification of test limits as define in Line List/Schedule.

l.Conduct Line checking, Punchlist activities, Red-line & As-Built Drawings (Isometric, General Arrangement and P&ID drawings).

Project Involve - Design & Construction Execution Stage:

Project Title/Owner: Micron Pte., Ltd.

Fab 10X (Detailed Engineering & Expansion Project)

IM Flash Singapore, North Coast Drive, Singapore 757432

Position: Senior Piping Designer/Piping Checker

Manpower Secondment of Mobiz Pte., Ltd. to KBR Singapore Pte., Ltd.

Department Assign: Piping - Engineering Operating Center

Period: December 2013-January 2015

Address: 79 Anson Road, Singapore

Reason for Leaving: Project Completion.

Job Description:

a.Provide piping design clinic to Junior Piping Designers.

b.Checking piping routing & lay-out, interference, tripping hazards and operation/maintenance spaces that are not satisfied per project specifications.

c.Involve in developing the piping activities by using Intergraph’s SmartPlant 3D (SP3D) software.

d.Participate in Design Review in Mechanical/Piping concepts & Equipment Layout.

e.Understand and apply project specifications and piping basis in modular projects.

f.Squad check of vendors drawings (i.e. Mechanical equipment drawings and nozzle orientation & Data Sheets, Project piping Standard & Specifications).

g.Prepares & review engineering deliverables.

Project Involve & Design On-Execution Stage:

Main Contractor Partner: Tecnicas Reunidas Canada

Project Number/Owner: 806147 VDU-DRU-HSU Project (Detailed Engineering Project)

Canadian Natural Resources Ltd., Oil Sands, Edmonton, Canada

Company: J & S Consultancy Services Co., Inc.

Position: Piping Designer - SP3D

Client Caters: Mitsubishi Heavy Industries MCEC

Department Assign: Piping - Engineering Center

Period: January 2013 – July 2013

Address: Republic Glass Bldg., Legaspi Village, Makati City, Philippines

Reason for Leaving: Project Completion.

Job Description:

a.Works in a workshare project between Mitsubishi Heavy Industries and J&S offices.

b.Responsible for the split areas assign in developing the piping activities in a workshare mode project by using Intergraph’s SmartPlant 3D (SP3D) software.

c.Performed piping layout, equipment layout, platforms and miscellaneous structure into the 3D modelling using SP3D.

d.Checking piping routing, interference, tripping hazards and operation/maintenance spaces that are not satisfied per project specifications.

e.Did material take-off based on P&ID's and piping layouts.

f.Extraction & checking of isometric drawings generated from SP3D.

g.Prepared and checked 2D drawing for special pipe support.

h.Squad check of vendors drawings (i.e. Mechanical equipment drawings, equipment lay-out, nozzle orientation & Data Sheets, Project piping Standard & Specifications).

i.Prepares & review engineering deliverables.

Project Involve & Design On-Execution Stage:

TAF Project (Detailed Engineering Project)

Owner: Ammoni - Tatarstan Fertilizer Plant Project

Repubilc of Tatarstan, Russian Federation

Company: Samsung Engineering Saudi Arabia Co., Ltd.

Position: Piping Design Engineer / Tender Engineer

Department Assign: Piping - Engineering Center

IK-EPC Projects (Detailed Engineering & Revamp Project)

Period: June 2011 – June 2012

Address: Samsung Naffora Techno Valley

Royal Commission Area, Al-Jubail

Kingdom of Saudi Arabia

Reason for Leaving: Project Completion.

Job Description:

a.Involve in Project estimate, Proposal & Tendering activities.

b.Responsible in the in-depth study of ITB package document, prescribed by the client.

c.Responsible for the split areas assign in developing the piping activities in a workshare mode project by using Intergraph’s SmartPlant 3D (SP3D) software.

d.Prepares piping engineering deliverables & BULK MTO.

e.Conceptualized the large bore piping and developed cost significant pipeways and pipeline corridors.

f.Did material take-off based on P&ID's and piping layouts.

g.Prepares pipe loading data.

h.Attend technical meetings and discuss design issues with the client’s Project Management Team.

i.Participate in design review with the Client and coordination of design issues with other engineering disciplines.

j.Squad check of vendors drawings (i.e. Mechanical equipment drawings, equipment lay-out, nozzle orientation & Data Sheets, Project piping Standard & Specifications).

k.Prepared and checked 2D drawing for special pipe support.

l.Proactive in the interface of design concepts execute the termination of clash items.

m.Participated in Projects: Material Cost Evaluation, Proposal, Tendering & Estimates as mention in Item “B”.

Project Involve & Design On-Execution Stage:

Wasit Cogeneration & Steam Generation Project

Wasit Gas Plant - Saudi Aramco

Al-Jubail, Kingdom of Saudi Arabia

Item “B”: Project (Proposal & Tendering and Estimates) Involve:

Project Title/Owner: De-Bottlenecking & Expansion Project

Bahrain Petroleum Company (BAPCO)

Manama, Bahrain

Project Title/Owner: CO2 Capture & Injection Facilities Project

90.0 Km Pipeline (8” diameter)

Hawiyah Natural Recovery Plant to

Uthmaniyah Gas Plant

Saudi Aramco, Al-Hofuf

Kingdom of Saudi Arabia

Company: Ferrostaal Industrieanlagen GmbH (formerly: MAN Ferrostaal Oil & Gas, Ltd.)

Position: Piping Engineer / Tender Engineer

Department Assign: Tripoli Engineering Head Office (Detailed Engineering & Revamp Projects)

Period: June 2009 – March 2011

Address: Tripoli, Libya

Reason for Leaving: Political Up-rise crisis in Libya last March 2011.

Job Description:

a.Responsible in checking isometrics generation against the P&ID's per project specifications, equipment vendor drawings and nozzles orientation.

b.Participated in conceptual design of piping routing (2D lay-out) as per P & ID, equipment lay-out, pipe rack drawings with reference to applicable project and international standards and specifications.

c.Squad check of vendors drawings (i.e. Mechanical equipment drawings, equipment lay-out, nozzle orientation & Data Sheets, Project piping Standard & Specifications).

d.Prepares and specify pipe support requirement base from the result of Caesar II (Stress Analysis report).

e.Participated in design review and coordination of design issues with other engineering disciplines.

f.Attend technical meetings and discuss design issues with the client’s Project Management Team.

g.Design the flowline/pipeline route of 45-wellheads in J & K Field up to gathering stations to GOSP area, respectively.

h.Participated in design development defined piping scope of work.

i.Prepares pipeline engineering deliverables & BULK MTO.

j.Responsible for preparation of Demolition drawings and Checklist/Index.

k.Responsible for preparation of Tie- In Job Cards for process and GOSP area maintenance shutdown.

l.Checked the equipment layout and issued to inter-discipline.

m.Participated in Projects: Material Cost Evaluation, Proposal, Tendering & Estimates as mention in Item “B”.

Project Involve & On-Design Execution Stage:

Project Title/Owner: Debottlenecking, Flowlines, OHTL and General Facilities Project, J&K Field, Akakus (Repsol) Oil Operations

Replacement of GRP to GRE Pipes Project

GOSP A, NC-186 Akakus (Repsol) Oil Operations

El-Sharara Field, Ubari, Libya

Item “B”: Projects (Proposal & Tendering and Estimates) Involve:

Project Title: Upgrading Works of Water Injection Facilities

I/R Field Akakus (Repsol) Oil Operations

El-Sharara Field, Ubari, Libya

Project Title: 90.0 Km Pipeline (16” diameter)

WAFA Field, Mellitah Eni Agip Ltd.

Tripoli, Libya

Company: Tecnicas Reunidas, S.A./Technip Consortium

Position: Piping Engineer

Department Assign: Engineering

Period: July 2007- December 2008

Address: Quang Ngai, Vietnam

Reason for Leaving: Project Completion.

Job Description:

a.Coordinate and discuss design/construction issues with other engineering disciplines.

b.Responsible in checking of isometric drawings generated are as per the latest approved Engineering Flow Scheme, Equipment approved for construction drawings, Piping project specifications and client’s standard using Smart Plant Review (SPR) utility software.

c.Provide Engineering support to Construction Department in the on-going construction activities at site i.e. reply to Technical Queries rise by Sub-contractors.

d.Responsible to determine the worthiness of proposed piping systems for construction and operation.

e.Checking awkward routing, interference, tripping hazards and operation/maintenance spaces that are not satisfied per project specifications.

f.Responsible for site engineering activities/survey such as clarification of approved drawings versus established specifications, revision of drawings as per actual installation.

g.Responsible for preparing site modification of piping routing changes based on actual site condition / isometric sketches and as-built.

h.Attend in-situ walk tru with the Clients.

Project Involve & On-Construction Execution Stage:

Project Title/Owner: Dung Quat Refinery - Crude Distillation Unit

Vietnam Oil & Gas Corporation PetroVietnam

Company: Al Suwaidi Industrial Services Co., Ltd.

Position: Piping Engineer

Department Assign: Engineering

Period: September 2004 – September 2006

Address: Yanbu, Kingdom of Saudi Arabia

Reason for Leaving: Project Completion.

Job Description:

a.Supervise in on-going Tie-In & Hydrotesting activities, Mechanical Piping Installation.

f.Provide Engineering support to Construction Department in the on-going construction activities at site. Prepares line re-routing, field modification changes and as-built drawings & Line checking.

b.Prepares Piping Test Packages (Tie-in & Construction).

c.Prepares quantification of Piping & Pipe Support materials for requisition & fabrication.

d.Prepare engineering drawings prior to fabrication shop (i.e. Spooling and weld mapping of isometric drawings) and issue to other discipline.

g.Check Piping Support & Piping Spooled drawings prior for pre-fabrication & fabrication.

h.Perform the hydrotest circuits diagram in accordance with the engineering standard & procedures, as well as planning a test in order to define the material needs by circuit or lines before the starting of test of works.

Project Involve & On-Construction Execution Stage:

Main Contractor Partner: Tecnicas Reunidas Gulf Co., Ltd.

Project Title/Owner: BI-10-0010 Diesel Hydro Treater Project

Yanbu Refinery, Saudi Aramco

Company: Al-Rushaid Construction Company & Engineering Equipment, Inc., Ltd.

Position: Junior Piping Engineer / Estimate Engineer

Department Assign: Technical Support Services - Engineering

Period: March 2001 – July 2004

Address: Al-Jubail, Kingdom of Saudi Arabia

Reason for Leaving: Project Completion.

Job Description:

a.In-charge in quantification of Pipe Supports, As-built, & Technical queries.

b.In-charge in preparation of materials take-off for pipe supports & coordinates the installations of piping and supports.

c.Line checking activities in the installations of pipe supports, spooling, & weld mapping, and correct valves flow direction & orientation according to its plan isometric drawing / as-built drawings.

d.Coordinator of construction Punchlist Items prior to completion of Test packages.

e.In-charge in the quantification of Pipe Supports and review pipe support drawings i.e. needed for fabrication.

f.Spooling and weld mapping of fabrication isometric drawings (IFC).

g.Supervise Sub-contractor in the Hydrotest, Bolt Tensioning, Pneumatic Torquing & Flange Re-facing activities.

h.Prepares Project Material Cost Evaluation & Estimates.

i.Participated in Projects: Material Cost Evaluation, Proposal, Tendering & Estimates as mention in Item “B”.

Project Involve & On-Construction Execution Stage:

Main Contractor Partner: Chiyoda Petrostar, Ltd. / FLUOR Corporation

Project Title/Owner: United Olefins - Ethylene Plant Project

Jubail United Petrochemical Plant

Period: July 2003 - July 2004

Address: Al Jubail, Kingdom of Saudi Arabia

Main Contractor Partner: AMEC BKW Arabia, Ltd.

Project Title/Owner: BI-3150 Ethane & NGL Recovery Project

Berri Gas Plant, Saudi Aramco

Position: Junior Engineer (Piping)

Period: July 2002 - May 2003

Address: Al Jubail, Kingdom of Saudi Arabia

Project Title: 4 x 600 MW Ghazlan Power Plant Phase II Project

SCECO

Period: March 2001 - June 2002

Address: Juaymah, Kingdom of Saudi Arabia

Item “B”: Projects (Proposal & Tendering and Estimates) Involve:

Project Title/Owner: Project Title/Owner: United Olefins - Ethylene Plant Project - Jubail United Petrochemical Plant

Period: November 2002

Company: Steam Systems Phils., Inc.

Position: Assistant Sales Staff / / Technical Engineer

Period: June 1999 - August 2000

Address: Sucat, Parañaque City, Philippines

Reason for Leaving: Project Completion.

Job Description:

a.Develop, promote business relationship & identify potential Steam Users Plants and promotes Spirax-Sarco Products by providing technical knowledge for plant efficiency on how to attain & to maintain the proper and good use of Steam using Spirax Sarco Products.

b.Design Piping Systems Arrangements & Lay-outs in Steam Engineering: Generation, Distribution, Utilization and Condensate Recovery System.

c.Prepares modification of piping lay-out/arrangement for Steam & Condensate lines in industrial / manufacturing plants.

d.Conduct plant survey, Line checking & re-design the existing steam & condensate lines in industrial, manufacturing & processing plants who are “steam users”.

e.Supervision in Installation of Spirax-Sarco Products in Upgrading works of Steam & Condensate lines.

f.Participated in Projects: Material Cost Evaluation, Proposal, Tendering & Estimates as mention in Item “B”.

g.Participate in EPC Project of expansion and revamp Projects as mention below:

Item “B”: Projects (Proposal & Tendering and Estimates) Involve:

1). Wyeth Philippines, Inc., Laguna Plant, Philippines

2). Coca-Cola Bottlers Phils., Inc., Sta. Rosa Laguna Plant, Philippines

3). Treasure Packaging Corporaton, Mandaue Plant Cebu, Philippines

4). Alpha Oil Mills, Cebu Plant, Philippines

COMPUTER SOFTWARES’ KNOWN:

AutoCAD 2015

Microstation VJ

CADWorx (Basic, use 2.0-months)

MS Office 2007

Navisworks

SmartPlant 3D (SP3D) 2011 R1

Smart Plant Review (SPR) Ver. 10.0

PERSONAL DATA:

Date of birth: 15 February 1976

Place of birth: Hilongos, Leyte, Philippines

Civil Status: Married

Citizenship: Filipino

Height: 5’ 6”

Weight: 175 lbs.

Religion: Roman Catholic

Father’s Name: Mr. Dalmacio M. Flores

Mother’s Name: Mrs. Vicenta R. Flores

Permanent Address: Himo-aw, Hilongos, Leyte, Philippines

Language or Dialect Spoken: Bisaya, Chavacano, English, Tagalog & Spanish

EDUCATIONAL ATTAINMENT:

Elementary: Pilar College

Address: R.T. Lim Blvd., Zamboanga City, Philippines

Year Graduated: 1989

High School: Ateneo de Zamboanga

Address: La Purisima St., Zamboanga City, Philippines

Year Graduated: 1993

College: Western Mindanao State University

Address: Normal Rd., Baliwasan, Zamboanga City, Philippines

Year Graduated: 1998

Course: Bachelor of Science in Mechanical Engineering

Special Skills: Drawing, Driving, Computer Literate

SEMINARS & TRAININGS ATTENDED:

1. In Pneumatics by FESTO, Inc. at the University of San Carlos, Cebu, February 2000.

2.In Steam Engineering given by Steam Systems Philippines, Inc., and Spirax Sarco Pte., Ltd. at the Monde Denmark Nissin Biscuit Corporation (Cebu Plant), May 2000.

3.SP3D – Smartplant 3D (Piping, Equipment and Frameworks Modelling).

4.Passed the Working-at-Heights (Assessor & Supervisor), Building Construction Supervisors Safety Course-(BCSS) taken last January 2015 in Ever Safe Consultants Pte. Ltd., Pioneer Junction, No:3, Soon Lee Street, Singapore 627606.

CHARACTER REFERENCES:

1.Mr. Ismael F. Sancho 2. Mr. Nestor A. Galang

Managing Director Principal Technical Prof.-Piping

Tecnicas Reunidas, S.A. KBR-AMCDE Saudi Arabia

Arapiles, 14 Al-Khobar

28015 Madrid, Spain Kingdom of Saudi Arabia

+34-679-****** / +917********* +966-*-***-****

acxu74@r.postjobfree.com acxu74@r.postjobfree.com

Contact this candidate