To find a secure full time position where I can utilize my skills to their full potential. I

would like to find a position that will allow me to gain further experience with the possibility for future advancement.

welder

Big 3 Precision, Dearborn, Mi

09/2016 to Present

We weld on various types of racks that hold automotive accesories from fenders, to headliners. Mig welding is the process of welding we use also have the use of plama cutting machines, and oxyfuel cutting and burning torches. We also have to rework some racks to accept new components for the industry.

belt slicer trainee

Duke & Duke Services Inc., 25566 Pennsylvania Rd, Taylor, 48180, Mi 05/2016 to 05/2016

Was training watching osha videos about safety safe work environments and so on watch a full week of videos and some hands on experience.

Mig Welder

S&A Staffing Inc., Sterling Heights, Mi

12/2015 to 04/2016

I work at a company call Precision in Inkster mi, I weld on various types of racks for the automotive industry. Mainly using mig welder with mild steel wire, also assembly different components in the racks when told to do so. The shop is a production atmosphere so getting your numbers for the day are key.

EXPERIENCE

William K. Cummings

16965 Rudgate st

Southgate, Mi 48195

734-***-****

acxsl1@r.postjobfree.com

SUMMARY OF QUALIFICATIONS

Welding experience; arc,mig mild steel, stainless, aluminum regular and using spool gun. Tig welding; mild steel, stainless, and aluminum gas welding outfit; cutting, brazing, and sodering. Have knowledge using plasma cutter, bandsaw, electric and air tools hi-lo experience manual pallet jacks. Warehousing loading and unloading trailers using hi-lo manual pallet jacks, shipping and receiving, dock work. Basic knowledge working on cars or trucks and basic blueprint reading.

OBJECTIVE

Welder

Benlee Inc., Romulus, Mi

07/2014 to 04/2015

I was welding parts on trailers for roll off containers, welding the top then flipping the trailers over on its side using two 10 ton overhead cranes. Once the side was fully welded with intalling proper gussets and accessories would use the two cranes to flip over to other side and repeat the process. Then fully weld the bottom install proper axles, u bolts center pin, air bags, air tanks, all in the correct areas. An install proper towers for axles layout are with tape measure and align everything properly and fully weld. Install axles weld in place and then square up axles for proper alignment and move trailer to front of shop using cranes. Also had to use plasma cutter, torches and mig welding machines for the job. Mig Welder

Reliance One Inc., Auburn Hills, Mi

12/2013 to 03/2014

I worked for a company called Watson Engineering in Taylor mi, putting parts into fixtures and looking over the blueprints for proper welding instructions. Including what type of welding and proper welding sequence in which the company wanted the parts welded. After welding was completed I would clean the part of welding splatter using a chisel and 90 degree air die gringer with a soft pad. Next would remove the part from fixture and install it in another text part fixture and install all pins. To make sure part has not warped from to much heat or inproper fixture alignment. Last step was to place parts on empty pallet and place a piece of cardboard on top of part.

Welder/Trailer Mechanic Trainee

Commercial Trailer, Warren, Mi

09/2013 to 12/2013

Worked on enclosed semi trailers that had to be overhalled either 48' or 53' trailers. We would remove smashed or dented trailer walls and install new ones using rivets using an air hammer and solid piece of bar stock with one person on each side. Remove old wiring and install new with new rubber grommets, side markers, and brake lights all were led. We would remove old rear swing out door and the header above the door and install new header and side walls if needed. Installlation of new slide rails for new slide up door were put in and new door and sometime we would install lift gates on rear of trailer. Axle assembly would be removed and rebuilt one put in it's place moved back 9 holes in the frame and gussets welded to strengthen the frame. Had to use of arc welding, mig welding, plasma machines, bandsaws and air tools.

Mig Welder

Reliance One Inc., Auburn Hills, Mi

07/2013 to 09/2013

I worked for a company called Argus in Redford Township, welding on various types of racks for the automotive industry. The racks would be retro fitted with new parts for different applications. We would have to cut sections out using either a plasma cutting machine or using oxyfuel torches then the fitters would install new parts an we would weld it back together.

Welder/Machine Operator

SAS Global Corp, Warren, Mi

11/2010 to 06/2012

We made wear resistance plate in many different thicknesses for the mining industry. My duties included running a machine which held a large round drum which had to plates welded to together on the drum with backing bars to hold both plates together. The drums would rotate and be overlayed with a process called chromium carbide, each drum would take several hours to fully overlayed depending on its lenght. Also would work in welding area installing the half moon plates onto the drums using mild steel wire using a mig welder. Would use an hi-lo to install the plates first the bottom then install drum then install top and properly align plates using pry bars and hammers. Once places are on drum correctly we would install backing bars in channel on drums and both weld plates together with three passes.

EDUCATION & TRAINING

Diploma, Basic's also Auto & Machine Shop, Theodore Roosevelt High, 540 Eureka Rd Wyandotte Mi, 48192, 4 year(s)

Welding, Henry Ford Community College, 5101 Evergreen Rd, Dearborn Mi 48128, 1 year

(s)

Contact this candidate