EDWARD R. KERR, JR.

216-***-**** cell

acxres@r.postjobfree.com

ENGINEERING SUMMARY

Layout and revise electrical schematics, ladder logic, loop, interconnection, one and three line diagrams, PLC, cable and harness, enclosure panels wire trays. Write technical specification and procedure documents for installation and assembly. Familiar with oil and gas refinery processes (P&ID) schematics. Layout electronic components and schematics on AutoCAD and Cadence schematic capture for printed circuit boards. Layout and design conduit routing throughout cable trays, structural and facility machinery. Detail mechanical parts and components for machinery, refinery power and electrical equipment. Notable industries include, Petrochemical processing plants, Government Military, Pharmaceutical, Clean room and laboratory, Transportation, Energy, and Manufacturing

ENGINEERING RELEVANT SKILLS

Operate AutoCAD Electrical (Release 2016), Micro-station, Word, Excel, Acrobat Adobe, Raster, Cadam (Release 21) with Cadex electrical software, Cadence.

I have knowledge of National Electrical Codes, UL-508A, DOD standards, ASME/IEEE and geometrical tolerance. Training course in Agile and Access software.

UNRELATED WORK EXPERIENCE

02/16 to 05/16 – Retail sales associate for Home Depot (Part Time) Operate scissor lift truck, stock merchandise

12/14 to Present – Operate independent landscaping, Volunteer remodeling homes (roofing and painting.

RELATED WORK EXPERIENCE

02/16 to Present - Electrical Designer – Independent Contractor – Cleveland, Ohio (Part Time.)

Update Mechanical, Electrical and facility and residential diagrams, on Auto-Cad 2015

09/14 to 06/16 - Electrical Designer/Drafter- Contractor @ Alcoa (Oh)- PSE (Utah)

Layout and update electrical diagrams for conveyor line emergency and safety equipment on

AutoCad 2014. Verify and modify electrical instrumentation in manufacturing plant.

Update and layout electrical grounding, details and cable trays for gas storage facility. Create single line diagrams, update Electrical drawing index and incorporate xref changes in paper/model space on AutoCAD 2014.

RELATED WORK EXPERIENCE – CONT.

Edward R. Kerr, Jr. Page 2.

11/13-03/14 - Electrical Designer/Drafter - Contractor @ Matrix Technologies (Oh)

Update and layout electrical P&ID, control schematics, loop drawings, Instrumentation list, panel, layout and revise cable trays runs, edit grounding xref drawings on AutoCAD 2013. Check cable schedules, Instrumentation installation manuals/procedures and Instrumentation diagrams, related to Oil and Gas Marathon (Michigan) documents.

08/12-07/13 - Electrical Designer/Drafter - Contractor @ Toshiba L- 3 (Texas)

Update and layout electrical control schematics, panel diagrams for Oil and gas customers using AutoCAD 2012. Verify and document panel components, size cables and wires for electrical technician on the shop floor. Update electrical cable and schematics diagrams for aircraft simulation using Access and AutoCAD 2011. Create standard documents on procedures to update and revise cables drawings with Access

03/12-08/12 - Electrical Designer/Drafter – Mahindra Satyam (Penn.)

Layout electrical schematic diagrams for new and existing projects for the locomotive industry at General Electrical using AutoCAD Electrical 2011 software. Update existing schematic diagrams on AutoCAD 2010 and create new symbols and parts for electrical assemblies. Lead Electrical Designer and coordinator of six Electrical Designer, to track and maintain the workload duties and requirements for future projects. Maintain work log schedule and time spent on projects.

10/11-03/12 - Electrical Designer/Drafter - Contractor @ AEP (Ok.)

Incorporate electrical sub-station standards for 480v schematic schemes in the engineering department design working folders. Revise and edit manual/raster drawings, loop diagrams, produce and layout conduit and routing cables trays to and from motor control cabinetes and other related machinery on Micro-station 2012. Perform walk down and update equipment per field work at trailer substations.

08/10-10/11 - Electrical Designer/Drafter - Cntrctr @ Avtron (Ohio) - Northrop Grumman (Va.)

Layout and design ac/dc drive control electrical schematic, single line and panel diagrams on AutoCAD 2011, and AutoCAD Electrical 2010, for manufacturing, oil and gas, industrial, and energy.

Revise and update red-line electrical power diagrams from engineer’s verbal and written instructions. Calculate the size/weight of electrical equipment, wires and cables to be installed or remove from aircraft carrier. Verify electrical equipment through ship-check. Develop electrical schematics and block diagrams.

11/08-11/09-10/94-04/95 - Electrical Designer - Contractor @ Middough Consultants – (Oh.)

Layout and revise electrical single line diagrams from engineers verbal and written instructions.

Revise facility lighting, site plans, electrical red-lines and elevation, structural drawings for routing low to high voltage conduit routing and power distribution to controls and substation, motor control centers, perform duties working in paper space and model space. Check Instrumentation installation manuals/procedures, size cables and wires, layout cable trays and revise oil/gas electrical and facility diagrams for Shell refinery. Knowledge of 480 volt motor control schematic, wiring diagrams, 1 & 3-line diagrams, and power transformer schematic.

RELATED WORK EXPERIENCE – CONT.

Edward R. Kerr, Jr. Page 3

04/07-11/08 - Electrical Designer/Drafter - Contractor @ Philips Imaging – (Oh)

Layout and design electrical cable and harness for control cabinets. Layout electrical assembly diagrams of medical imaging equipment. Select and size wires and cables for assembly, research and purchase parts for electro-mechanical devices. Design electrical enclosures panels with bill of materials. Design mechanical parts for imaging table. Order parts for harnesses and enclosures with vendors and salespersons. Layout cable/harnesses on stick table. Document diagrams of imaging system on AutoCAD Rel. 2008.

02/01-10/05 - Electrical Designer/Drafter - Lockheed Martin NESS – (N.Y)

Layout and designed schematics and cable/harness diagrams from engineering sketches for various radar programs. Revise printed circuit assembly boards and mechanical diagrams for radars. Produce geometry (gerbers) for printed circuit board packages, using allegro electrical software. Update and convert raster drawings to AutoCAD format, PDF to AutoCAD for revisions. Maintain sophisticated filing system for engineering control of documents. Design electrical enclosures panels with bill of materials on AutoCAD Rel. 2005.

10/00-02/01 Electrical Designer/Drafter - Contractor @ Lockheed Martin – (N.Y)

Layout and design cable/harness drawings, electrical enclosures and revise electrical schematics from engineering sketches. Design electrical enclosures panels with bill of materials. Revise mechanical assembly drawings on AutoCAD Rel. 2000.

01/99 -12/99 - Electrical Designer/Drafter - Contractor @ Texas Instruments – (Texas)

Revise and layout PLC schematics, enclosure panels and mechanical parts diagram. Maintain sophisticated filing system for engineering control of documents. Field verify and document electrical and P&ID’s for a microchip clean-room. (AutoCAD Win. 95 Rel. 14)

EDUCATION

09/2015 – AutoDesk AutoCAD Electrical (2015) 1 wk. Course (Certificate)

02/2015 to 09/2015 On-line Electrical Engineering Classes (01/2015 – 11/2015)

Engineering Technical Institute – Cleveland, Ohio

Kaplan Institute – Cleveland, Ohio (Certificate)

LEADERSHIP/INVOLVEMENT

- Leader of designer and drafters developing cable and harness diagrams for radar systems

- Lead electrical designer and coordinator of six electrical designers

- Track/maintain the workload duties and requirements for future projects

- Maintain sophisticated filing system for engineering control of documents

Contact this candidate