CURRICULUM VITAE
Personal Data
Name : Busran
Date of Birth : October 26,1975
Marital Status : Married
Nationality : Indonesia
Religion : Moslem
Gender : Male
Current Location : Indonesia
Educational Qualification : Bachelor Degree Mechanical Engineer
Total Experience : 18 Years
Languages Known : English,Indonesia,Melayu
Email : acxpzr@r.postjobfree.com
Mobile Phone : +628**********(Indonesia)
Adress :JLN.AP Mangkunegoro No 5 RT 009 Bontang,East Borneo Indonesia 75323
TURBO MACHINERY SPECIALIST ( TURBINES)
Field Maintenance Oil &Gas Operation (Offshore/Onshore)
OBJECTIVES
Become a valuable asset for the people I may work with and able to develop and mature with every task which I will face ahead.
Personal Profile
Turbine Machinery Specialist and Field machanical technician in oil and gas Industry Experienced more than 15 years, Particularly in Oil & Gas Industry Offshore Production and onshore Operation, Familiar with Turbine engine/compressor (Maintenance,Overhaul,Unit Dismantle,Unit Reinstalled,Alignment,Vibration,Boroscope and Repairing),Familiar Overhaul and Maintenance All kind Centrifugal pump (Shipping pump,Jockey pump,Well clean pump),System Maintenance Reporting & Documentation, Standard Job Operations, Job Safety analysis,Standard Work Permit Oil & Gas, Construction Safety, Medical Evacuation & Emergency Response. A conscientious person who works well under pressure. Flexible and organized approach to heavy workloads. Good team player able to use own initiative
Summary of Skills, Responsibility & Working Experience
01 December 2004– Up to 31 March 2016, Chevron Indonesia as Turbo Machinery Specialist ( Turbines Mechanical )
Maintain Reliability and availability Of Turbine Gas turbine (Engine & Compressor) Operation
Routine Preventive,Predictive and Corrective Of Turbine Gas turbine (Engine & Compressor) Operation base on Scedule ( PM 4K & 8K Hours)
Overhaul unit Of Turbine Gas turbine (Engine & Compressor)
Unit Dismantle and Reinstalled
Condition Monitoring (Vibration,deffect units)
Turbine Engine & Compressor Alignment
Turbine Engine & Compressor Boroscope
Repaired All part/equipment support for Turbine Gas turbine (Engine & Compressor)
System Maintenance Reporting & Documentation, Standard Job Operations, Job Safety analysis,Standard Work Permit Oil & Gas, Construction Safety, Medical Evacuation & Emergency Response
Day to Day Activities 2015-2016 (Turbine engine and Compressor Dismantle,Installation and Overhaul)
Date
Remaks of Jobs/Activities
08-15 Jan 2015
Tools Preparation For G-1D ( Turbine Generator) and Engine Installation in Santan Terminal,East Kalimantan,Chevron Indonesia ( Onshore)
03-16 Mar 2015
Preparation,reinstallation CAE-1510 Engine and Compressor in West seno field(Deep water) East Kalimantan,Chevron Indonesia (Offshore)
01-06 April 2015
Overhaul C303B ( Compressor Gaslift) Installation in Attaka Field,East Kalimantan,Chevron Indonesia ( Offshore)
11-15 April 2015
Overhaul of HPC ( High Pressure Compressor) C-1A for unit Sepinggan Field,East Kalimantan,Chevron Indonesia ( Offshore)
16-21 April 2015
Overhaul of HPC ( High Pressure Compressor) C-1B for unit Sepinggan Field,East Kalimantan,Chevron Indonesia ( Offshore)
27 Mei-06 June 2016
Engine Compressor C-101 Replacement and Start Up Installation in Santan Terminal,East Kalimantan,Chevron Indonesia ( Onshore)
30 June-05 July 2016
Engine Compressor C-103 Replacement and Start Up Installation in Santan Terminal,East Kalimantan,Chevron Indonesia ( Onshore)
22-30 August 2015
Restaging Project C-1A Sepinggan Field,East Kalimantan,Chevron Indonesia ( Offshore)
04-Nov-05 Des 2015
Project Engine and Compressor Change Out,Compressor Overhaul, Engine Replacement,Compressor Reinstallation,Start Up of unit C-30 (Booster Compressor) C-40 ( Gaslift Compressor) NIB Field(Serang),East Kalimantan,Chevron Indonesia ( Offshore)
05 Jan-15 March 2016
Project CAE-1610 Engine and Compressor (Taurus Unit) replacement in West seno field(Deep water) East Kalimantan,Chevron Indonesia (Offshore)
Event set up the availability part and support tools for equipment (Shop Activities)
Part/Tools
Used For Engine/Compressor Turbine and Generator
Hands Tools
For Engine/Compressor Turbine and Generator
Seal oil Regulator
Stock inner part, Repair, rebuilding for Spare Turbine Compressor
Buffer Gas Regulator
Stock inner part, Repair, rebuilding for Spare Turbine Compressor
Bleed Air Valve
Stock inner part, Repair, rebuilding for Spare Turbine engine
Exhaust Collector
Stock inner part, Repair, rebuilding for Spare Turbine engine
Seal oil Pump
Stock inner part, Repair, rebuilding for Spare Turbine engine (Hydraulic System)
Main Lube oil Pump
Stock inner part, Repair, rebuilding for Spare Turbine engine (Hydraulic System)
Primary Gas Valve
Stock inner part, Repair, rebuilding for Spare Turbine engine (Fuel system)
Secondary Gas Valve
Stock inner part, Repair, rebuilding for Spare Turbine engine (Fuel system)
Thermostart lube system
Stock inner part, Repair, rebuilding for Spare Turbine engine (Hydraulic System and safety devices)
Hydraulic System in Turbine Engine and Compressor
Seal oil System
The use of the centrifugal compressor to download the gas seal is in order not to get into the compressor lube oil system that will result in the LEL hi lube oil tank,Standard operating pressure of about +/- 20 psig above the suction pressure compressor
Lube oil System (Main lube oil pump,aux pump, Turning Oil Pump,Emergency Oil Pump,Jacking Oil Pump
Lube oil serves to lubricate the contact area on the bearings and shaft,pressure depends on lube oil system as per OEM spec ( know the specifics must Solar Turbines is 50-60 psig
Basic Control System
With basic mechanical for turbine engine and compressor but understand most Basic control system on Turbotronic of Solar turbine (Allen breadly, of PLC-5 for Turbotronic 3, until the ControlLogix 5000-series for Turbotronic 4)
1.Information devices, which is usually a transmitter or a probe that converts physical quantities (such as temperature, pressure or velocity) into electric signals (such as voltage, current, resistance, or frequency), and sends it to Input Module.
2.Input Module, which works to change electric signals into digital data (similar to the A / D converter) and sends it to the controller.
3.Controller, which contains a program that will make the decision based on the data information received from the input module.
4.Output module, that receives commands (decision) from the controller and converts it into electric signals (voltage or current) (similar in functionality to D / A converter).
5.Decision device, which converts electric signals into physical movement (such as solenoid or actuator).
Routine Job for Compressor and Engine Turbine Base Time
Preventive Maintenace 1K Hours
For Engine Compressor turbine ( This 1000 Hours done after a new engine installed by checking functions lube filter system)
Preventive Maintenace 4K Hours
Routine periodic maintenance 4K to check the function of the oil filter, air filter, air intake, safety device, leakage, by setting this parameter calibration standards
Preventive Maintenace 8K Hours
Routine periodic maintenance 8K with the oil filter and gas, calibration parameter based on the setting, lubricating oil changes if necessary, replacement of air intake filters and function test of safety devices
Project With Chevron Indonesia
Upgrade wet seal system (April 2008)
Project to upgrade the wet -seal oil system of boost compressor on Saturn-20 Compressor Set C-16 and Centaur-40L T-5302 Compressor Set C-30 in NIB Field, Chevron. Balikpapan East Kalimantan
Upgrade wet seal system (Feb 2011)
As Project Leader to upgrade the wet -seal oil system of boost compressor on Saturn-20 Compressor Set C-16 in Attaka Field, Chevron. Balikpapan East Kalimantan
Retrofit Control System (August 2014)
As Project for retrofit the turbine control system of Centaur-40 T-4702 Refrigerant compressor set in Santan Terminal, Chevron. Tanjung Santan East Kalimantan.
Tandem Boost Compressor Restaging (November 2015)
Restaging tandem boost compressor C28-C16-C16 in Sepinggan Field, Chevron. Balikpapan East Kalimantan
System Maintenance Documentaion,Standard Maintenance procedure, Standard Operation Procedure Qualified(SOPQ), Job Safety Analisys (JSA) and Work Permitted
Create Seven days Planning and implementation for Goal Project and all activities( Start to finish)
Working base on Maintenance and repair procedure from manufacture and qualified reference
Familiar Accustomed to adjust the working procedures in abnormal conditions based on place, time and circumstances (Capture in SOPQ)
Conduct hazard analysis before doing the work, when the work is in progress and completion of work (JSA)
Creating a work permit and apply a work permit based on the type of work, hours of work and work area
STOP WORK AUTHORITY, Stopping work for a while and review the SOP, JSA if deemed harmful to workers and equipment
House Keeping After finish Jobs
Safety Management
Implemented Five minutes Talk berfore Jobs execute
Implemented Works Permit base Kind of jobs,Time,condition and Place
Implemented SOP and SOPQ
Implemented JSA
Behavior Base Safety
Familiar Hazardous Area
Falimiar Hazardous Material
Hazard identification
Hazard Mitigation
Hazardous Waste management
Awards
Terimakasih Award
Chevron Indonesia Company
June 2007
Certificate of Appreciation (Terimakasih Award) for “Demonstrating a diligent works in finding out alternative solution in crane’s hydraulic trouble shooting”, Chevron Indonesia Company
Terimakasih Award
Chevron Indonesia Company
April 2008
Certificate of Appreciation (Terimakasih Award) for achievement in “Demonstrating hard work and support completed Turn around Project in NIB Field”, Chevron Indonesia Company
Teladan Award
Chevron Indonesia Company
November 2008
Carry out installation new seal system and degassing tank of gas compressor C-30 and C-40 in Serang Platform safely and meet the scheduled. Success troubleshoot and configure PLC of system control due to document of PLC related new control system of seal is not complete from manufacture.
Terimakasih Award
Chevron Indonesia Company
Oktober 2010
TMG Group has demonstrated hard work to complete Sepinggan C-1B overhaul 3 units boost compressors and problem solving C-1A compressor high vibration
Terimakasih Award
Chevron Indonesia Company
The team has demonstrated hard work to execute the critical projects such as Turbine Engine Change Out, Overhaul 1st 2nd 3rd stage of Compressor C-1B and Trouble Shooting Leaking at Gas Coolers timely and safely.
Terimakasih Award
Chevron Indonesia Company
Februari 2014
This team has consistently demonstrated hard work and support during the project. They provided continuous support to all the project stages to ensure all new upgrade system is working well. They work together as a team and always show determination to finish the project in a timely manner
1998 Up to November 2004, Unocal 76 Indonesia as Field Mechanical Techniacian ( Offshore Operation)
Handling Mechanical equipment ( Pump,Crane,valve,Diesel/gas engine) Maintenance
Centrifugal pump Overhaul
Positive Displacement Pump Overhaul
All Kind Valve Overhaul (Ball,Gate,Globe,Check)
Crane Wiring Remove and Reisntalled
System Maintenance Reporting & Documentation, Standard Job Operations, Job Safety analysis,Standard Work Permit Oil & Gas, Construction Safety, Medical Evacuation & Emergency Response
IT /Computer SKILLS:
Microsof Office ( Excell, word,outlook)
Internet
Health & Medical Training / Courses / License
BLS (Basic Life Support) from Chevron Indonesia Company
Basic Sea and Survival from Chevron Indonesia Company
Life Raft Training from Chevron Indonesia Company
Safety & Environment Training / Courses / License
KLO Installation Emergency Respond Team From Chevron Indonesia Company
Basic Rigging and Slinging From Chevron Indonesia Company
Advance Fire Fighting and Fire Member From Chevron Indonesia Company
BBS (Behavior Based Safety) and Software From Chevron Indonesia Company
FSWP (Fundamental Safe Work Practice) from Chevron Indonesia Company
Hazard Communication From Chevron Indonesia Company
Skill Improvment Program From Chevron Indonesia Company
Solar Gen-Set 3516 Training from Trakindo Indonesia Authorize Caterpillar
Gas Engine Maintenance from Trakindo Indonesia Authorize Caterpillar
Gas turbine (engine and compressor) Training
Reliability Overview Course from Chevron Indonesia Company
JDE Training ( CMS implemented and Software)
Boroscope Inspection
Educational Background
Bachelor Degree Mechanical Engineer (Diploma)
References
M.Agung P Turbo Machinery Coordinator in Chevron Indonesia
Telp: +62-542-*******