Reza Mahmoudi, P.Eng

Tel: ***-403-***-****

Email: acxno2@r.postjobfree.com

Senior / lead Rotating Equipment Engineer

QUALIFICATION HIGHLIGHTS

Registered Professional Engineer

Over twenty years of working experience with EPC,PMC, and construction companies as a Rotating Equipment Engineer

Experienced in FEED, detailed design, commissioning and start-up for large sized projects in oil and gas, refineries, onshore, offshore, NGL industries

Knowledge of international codes & equipment standards

Technical leadership of rotating equipment and expertise for all machinery packages

Performed technical management of the assigned equipment and interdisciplinary coordination through communication with engineering disciplines, vendors, EPC Contractors, third party & local authorities for successful design & installation of mechanical rotating equipment project.

Provided engineering support to construction of the facility, overseeing installation of the plant equipment at site. Support field and responded to RFI questions.

Primary responsible as a senior and lead engineer for Rotating Equipment i.e. pumps, compressors, gas and steam turbine, and packaged equipment, also responsible for static equipment such as pressure vessels, valves as a secondary area of expertise.

Provided technical support for rotating equipment packages of Projects in various phases (scope of work preparation, Pre-award evaluations, Engineering, Procurement, Construction, Commissioning and Start-up phases) responsible for change processes through RFI, NCR, SDR, and field changes. Coordinated with the Vendors and EPC’s where required on design issues.

Experience in sustaining, debottlenecking, operation, maintenance and capital projects. Experienced on equipment/line replacement, demolition and modification of projects which are in operation. Experienced in both Greenfield and Brownfield.

Provided Equipment Design, specifications, bid requisitions (RFQ,RFP), Order placement, Equipment sizing, Material Selection, Mechanical Data Sheet preparation; Bid Technical Evaluation of rotating equipment packages

Reviewed detailed design specifications and drawings provided by vendors and subcontractors and consulting Co. for compliance with Design Basis, Specifications, Codes, Standards and Industry Practices.

Managed technical work performed by vendors, including vendor document review test procedures and test plan review and approval to improve on product design or eliminate problems and ensured the job is complied with specification in purchase order and successful commissioning

Experienced in sustaining, debottlenecking, operation, maintenance and capital projects. Experienced on equipment/line replacement, demolition and modification of projects which are in operation. Experienced in both Greenfield and brownfield.

Trained client junior engineers during detail design

Familiarity with Reliability program elements and specifically modification predictive maintenance activities

Highly motivated and team player with strong communication skills

PROFESSIONAL EXPERIENCE

LEAD ROTATINGEQUIPMENT ENGINEER 2014- Now STANTEC, Assigned Projects (Husky, Cenovus, CNRL), Calgary, Canada

Prepared specifications, bid requisitions, RFQ, RFP, purchase orders and technical bid evaluation and analysis (TBE) for rotating equipment (API,ASME, Vertical suspended pumps Packages, Gas Compressors ( centrifugal, reciprocating, screw compressor- expander (NGL ), Air compressor and dryer packages….)

Managed technical work performed by vendors, including vendor document review to improve on product design or eliminate problems and ensured the job is complied with specification in purchase order. ensured inter-discipline coordination (squad checks, vendor data spec compliance)

Provided Rotating equipment packages selection, application and sizing for existing facilities retrofit, revamp/upgrade as necessary for husky.

Assisted in organizing and maintaining departmental design guidelines, forms and procedure manuals.

LEAD ROTATINGEQUIPMENT ENGINEER 2011-2014

HATCH, Canadian Natural Resources Limited CNRL, oilsand Horizon MFT Project’ Calgary, Canada

Prepared specifications, bid requisitions, RFQ, RFP, purchase orders and technical bid evaluation and analysis (TBE) for rotating equipment (API,ASME, BFW, Slurry, Vertical suspended pumps Packages, Air compressor and dryer packages….)

Managed technical work performed by vendors, including vendor document review to improve on product design or eliminate problems and ensured the job is complied with specification in purchase order. ensured inter-discipline coordination (squad checks, vendor data spec compliance)

Provided input for Hazardous Operations (HAZOPS) reviews and Risk Management activities, as required

LEAD ROTATINGEQUIPMENT ENGINEER, HATCH ENGINEERING, GASCO, ABU DHABI, HABSHAN SULPHUR GRANULATION PLANT, Calgary, Canada

Prepared specifications, bid requisitions, MRQ, MRP, purchase orders and technical bid evaluation and analysis (TBE) for rotating equipments.( Slphur booster and transfer pumps for habshan1-4,Habshan 5, and Habshan granulation Station, all API,ASME, BFW, Vertical suspended pumps Packages, Air compressor and dryer packages, Sanitary lifting station pkg for habshan granulation station)

Managed technical work performed by vendors, including vendor document review to improve on product design or eliminate problems and ensured the job is complied with specifications in purchase order. ensured inter-discipline coordination (squad checks, vendor data spec compliance)

Trained junior engineers during detail design

Ensured that the engineering contractor carries out his work to the required level of quality and participate in company quality audits. Prepared responses to engineering contractor technical queries or derogation requests.

Provided input for Hazardous Operations (HAZOPS) reviews and Risk Management activities, as required

SENIOR MECHANICAL ENGINEER (lead Rotating Equipment) 2010-2011

JACOBS ENGINEERING INC., Canadian Natural Resources Limited CNRL, Kirby Lake Oil sands Project’ Calgary, Canada

Prepared specifications, bid requisitions, RFQ, RFP, purchase orders and technical bid evaluation and analysis (TBE) for rotating equipments.(API,ASME, BFW, Vertical suspended, Dosing pumps Packages, Vacuum compressor package)

Managed technical work performed by vendors, including vendor document review to improve on product design or eliminate problems and ensured the job is complied with specification in purchase order. ensured inter-discipline coordination (squad checks, vendor data spec compliance)

Ensured that the engineering contractor carries out his work to the required level of quality and participate in company quality audits. Prepared responses to engineering contractor technical queries or derogation requests.

Inspected equipments during fabrication compliance with specification in purchase order.

Provided input for Hazardous Operations (HAZOPS) reviews and Risk Management activities, as required

Assisted in organizing and maintaining departmental design guidelines and procedure manuals.

LEAD MECHANICAL ENGINEER (Rotating equipment) 2009-2010

TECHNIP ITALY, CANADA S.P.A, Canadian Natural Resources Limited CNRL,PMC, Horizon Oil sands Project’ Fort McMurray, Canada

Supervised plants rotating equipment installation, commissioning start up, Operation and maintenance including (API,ASME, Slurry, Vertical suspended, Dosing pumps Packages, Vacuum compressor package )

Ensured that the engineering contractor carries out his work to the required level of quality and participate in company quality audits. Prepared responses to engineering contractor technical queries or derogation requests, report the activities of vendors, contractors

Witness tests for critical rotating machinery and assure compliance to Project specifications and standards.

Assisted in interpreting vibration results and develop a course of action and supervise asset criticality assessments

Developed and implemented necessary modification for fixing and rotating equipment operation and maintenance improvement, placed the orders follow up and expediting for expansions & modifications (not included in the original design)

Planned detailed methods of solving assigned problems, equipment failure analysis, assisted service personnel to troubleshoot equipments in the field, key contributor in support or Root Cause Failure Analyses (RCFA) as they occur

Prepared specifications, bid requisitions, RFQ, RFP, purchase orders and technical bid evaluation and analysis (TBE) for rotating equipment that was not included in original design

SENIOR MECHANICAL ENGINEER (Lead Rotating Equipment) 2006-2009 SNCLAVALIN, PCOSI ‘Petro Canada Forth hills Froth treatment Project’ Calgary, Canada

Prepared specifications, bid requisitions, RFQ, RFP, purchase orders and technical bid evaluation and analysis (TBE) for rotating equipments.(API,ASME, Slurry, Vertical suspended, Dosing pumps Packages, Vacuum compressor package )

Managed technical work performed by vendors, including vendor document review to improve on product design or eliminate problems and ensured the job is complied with specification in purchase order.

Ensured that the engineering contractor carries out his work to the required level of quality and participate in company quality audits. Prepared responses to engineering contractor technical queries or derogation requests

Inspected equipments during fabrication compliance with specification in purchase order

SENIOR MECHANICAL ENGINEER (Lead Rotating Equipment)

SNCLAVALIN, Shaybah EPC Project, Calgary, Canada

Prepared specifications, bid requisitions, RFQ, RFP purchase orders and technical bid evaluation and analysis (TBE) for rotating equipments. .(API,ASME, Vertical suspended, Dosing, Sanitary, Sealless Pumps Packages, Vacuum pumps package and injection compressors, steam turbines, gas turbines )

Managed technical work performed by vendors, including vendor document review to improve on product design or eliminate problems and ensured the job is complied with specification in purchase order.

Assisted in organizing and maintaining departmental design guidelines and procedure manuals

Provided mechanical engineering input to the company asset development team and major expansion projects including, gas compression, gas injection, and water treatment

Inspected equipments during fabrication compliance with specification in purchase order

Participated in P&IDs HAZOP review of shaybah central processing facility expansion.

SENIOR MECHANICAL ENGINEERS 1993-2006

TOTAL France thru N.I.O.C, PMC, Doorod -3 Project

Prepared specifications, bid requisitions, RFP, RFQ, purchase orders and technical bid evaluation and analysis (TBE) for rotating equipments

Involved in design, commission, and start up of all important packages include Chemical injection package; Nitrogen package, Corrosion inhibitor package; Instrument air package; and Sewer system

Prepared test matrix, test forms system summary, prepared commissioning procedure, scoping P&ID drawings

Managed technical work performed by vendors, including vendor document review to improve on product design or eliminate problems

Provided mechanical engineering input to the company asset development team and major expansion projects including gas sweetening (amine plant), gas compression, gas injection, water injection, and water treatment

Inspected equipments during fabrication compliance with specification

Supervised plant rotating equipment design, installation, commissioning, and start up including GE Nuovo Pignone Gas Turbine [frame-5] driven multi stage thermodyn centrifugal gas compressor for gas compression and injection (6200 Psig). Alstom tornado gas turbine driven multi stage sulzer pump for water injection (3900 Psig) and power generation. Kobelco centrifugal fuel gas compressor; screw compressors for air and nitrogen, various kind of centrifugal pumps [Flowserve, Sulzer]

Developed and implemented necessary modification for fixing and rotating equipment operation and maintenance improvement, placed the orders follow up and expediting for expansions & modifications (not included in the original design)

MECHANICAL ENGINEER

ABOOZAR Platform (offshore) oil project, kharg island, I.O.O.C

Prepared specifications, bid requisitions, RFP, RFQ, purchase orders and technical bid evaluation and analysis (TBE) for rotating equipments

Managed technical work performed by vendors, including vendor document review to improve on product design or eliminate problems

Conducted failure analysis of all important machinery failures to solve Complex problems [vibration, lubrication oil, process values and temp. analysis]

Assisted in interpreting vibration results and develop a course of action and supervise asset criticality assessment

Provided mechanical engineering input to the company asset development team and major expansion projects including gas sweetening (amine plant), gas compression, gas injection, water injection, and water treatment

Provided expertise related to the equipment and mentors junior engineers as required

Inspected equipments during fabrication compliance with specification

Involved in installation commissioning, start up and performance test of rotating equipment gas turbine, compressor, generator, and pumps in heavy oil production, gas sweetening, and water treatment plants

Performed and reported on inspections of all rotating equipments

Participated in company’s world class maintenance on standardization of condition monitoring t

MECHANICAL ENGINEER IN TRAINING

NIOC, oil production plants Kharg Island

Prepared mechanical data sheets, prepared inquiry requisitions, participated in technical bid evaluations and purchase requisitions.

Involved in Commissioning, start up, operation, and maintenance various type of rotating equipment [GE] Gas Turbine [Frame -5], Ruston gas Turbine [TA-1750&TD 4000], Solar Gas Turbine [Saturn], various types of pumps [David Brown, Sulzer, Flow Serve

Participated in P&IDs HAZOP review of aboozar oil processing facility expansion and crud oil/gas transfer pipelines

Provided mechanical engineering input to the company asset development team and major expansion projects

EDUCATION

Professional Engineering designation from APEGGA 2008

(Association of professional engineering of Alberta, Canada)

B.Sc. Degree in Mechanical Engineering 1993

Abadan institute of technology (University of Petroleum Industry), Ahwaz

M.Sc. Degree in Mechanical Engineering Arak University, Arak, 2004

TRAINING

CSTS, OSSA, H2S, FLRA, 2010

Air compressor package Airpack 1994

Gas Turbine (Typhoon) 1996 UK

Sulzer pumps 2000

Gas Turbine (Tornado) 2003 UK

Nouvo Pignone Gas Turbine & Gas Compressor 2004 Italy

Condition monitoring sys. Shank 1994

Contact this candidate