OWEN JENSEN
CALEDONIA, MICHIGAN 49316
TELEPHONE: 616-***-****, Cell 616-***-****
Email: acxjqo@r.postjobfree.com
DEGREES:
Milwaukee School of Engineering
B.S. Mechanical Engineering Technology
A.A.S. Fluid Power (hydraulics and pneumatics) Technology
EMPLOYMENT:
02/16-Present: Michigan State University - Facility for Rare Isotope Beams, East Lansing, MI
Mechanical Engineer (contract position)
Designed Magnet stands and frames on SolidWorks.
Magnet cradles. In addition, performed FEA to verify this design had an acceptable factor of safety for the application.
Designed a hose testing tank and associated piping.
05/15-10/15: Altron Automation Inc., Hudsonville, MI
Mechanical Engineer
Machine Design SolidWorks Designed. Created assembly drawings, bill of materials and detail for automated assembly machinery and test fixtures.
02/15-05/15: R.E.D stamp Inc (Corp-to-Corp), Grand Rapids, MI
Mechanical Engineer (contract position)
Machine Design, detail and sustaining engineering for existing equipment on SolidWorks
Authored and completed engineering change orders (ECs)
03/14-02/15: Zimmer-Biomet (Adecco), Warsaw, IN
Senior Development Engineer I (contract position)
FDA Remediation to assure compliance with 21 CFR 820.30 FDA’s QSR
Author and review FRA-Functional Relationship Analysis, Protocols and Memos for the medical devices Orthopedics industry. Analyzed Complaint History obtained from the Enovia database
Created Clinical Performance Summaries and Similar Device Analysis memo
Provided guidance for CAD Designers on layouts, and for Engineers engaged in FEA analysis, and Mentored co-op students
9/13-1/14: AIS Container Handling, Dutton, MI
Mechanical Engineer (company no longer in business)
Documentation control, BOM and vendor quotes.
Developed material handling system layouts on Autodesk Inventor 2014 and manuals
Modified designs of standard packaging equipment which would include: Baggers,
Table top conveyors, Flamers, Vision systems, Leak Detectors and Side Grip Elevators
2/13- 6/13: Robert Bosch LLC – Emissions Systems, Kentwood, MI
Design Engineer (contract position)
Engineering change orders (ECs), Developed DRBFM for change management
Provided design support for manufacturing engineering
Designed articles for testing in Pro/E (Wildfire 4)
Developed DRBFM for change management
Performed tolerance stack-ups. Altered designs of brackets/tubing for diesel particulate filters, oxidation catalysis and SCRs
10/12-2/13: ChemQuest (People Mart), Middleville, MI
Pre-Paint Systems Engineer (Contract position)
Assisted in quote preparation for paint systems
Created pre-treatment/ paint line proposals utilizing 2D AutoCAD
Design of Paint lines incorporating power-and-free conveyors
3/12-5/12: Eaton (Bartech), Grand Rapids, MI
Program Manager (Contract position)
Conducted aerospace New Product Development (NPD) gate reviews
Created weekly project updates of the current situation relating to problem/high risk areas.
Provided input and direction to the program team in areas of customer concerns
Managed the customer and supplier relationship
5/11-3/12: Hamilton Sundstrand (UTC Aerospace Systems), Rockford, IL
Mechanical Designer (Contract position)
Design and detail of ground support tooling for aircraft equipment primarily consisting of tools/equipment required to service, test, maintain, adjust, calibrate, transport, safeguard, store, inspect, repair, overhaul, install, remove, gauge, measure, assemble, disassemble or operate products and associated parts of an aircraft when on the ground. All Design performed on Unigraphics NX7.5 and Teamcenter. Also, authored and completed engineering change orders (ECs)
7/10-10/10: Randstad Engineering, Grand Rapids, MI
Project Analyst/Metrics (Contract position)
Conducted risk meetings and updated risk registrars
Collected and compiled project Metrics
7/04-7/10: GE Aviation Digital Systems, Grand Rapids, MI
Lead Engineer/Technologist/Build Support Engineer (BSE)
Design responsibilities:
Design of Interface assemblies, rack assemblies, cables, circuit card assemblies and precision fixtures
Design of avionic test equipment to perform acceptance, ESS and system testing of product on Unigraphics NX4 and Microstation
Designed cables on Microstation
Designed electronic Interface Assemblies and Breakout Assemblies on Unigraphics NX4
Knowledgeable of ASME Y14.100-2000, ASME Y14.5 M-1994 standards
Lead a multi-site mechanical development of two flight simulator stations
Export Classification for both ITAR and EAR technical data/commodities for electronic components.
Build Support responsibilities:
Released documentation into PDM
Maintained SAAG reports for projects
Maintained issues reports and created closing reports for projects
On a weekly basis compiled a list of outsourced build issues and productivity metrics. Submitted summarized reports to management
Utilized Activity Based Management software to plan schedules and track tasks
Maintained and calculated CPI, SPI, ETC and earned value for projects that I was the lead for.
Quoted for test system's hardware and labor hours
Wrote and edited process documentation for the department Work instructions, handbooks, templates and workflows.
Created work packages for outside design houses
Performed peer reviews
Created RFQs and reviewed these quotes
Interfaced with outsourcing vendors for design and fabrication of test equipment
7/97 – 4/04: Dematic, Grand Rapids, MI
Senior Mechanical Designer
Design conveyors and conveyor components on Unigraphics CAD (V18) system
3D modeling of assemblies and components
Sheet metal design, family part creation via Excel spreadsheet, plastic component design
Optimized part design with FEA tools
ECO/ECN creation and processing
4/92 – 6/97: J&J Machine & Tool, Holland, MI
Engineer (company no longer in business)
Designed machines used for washing, greasing, inspecting and assembling automotive parts
Designed gages for plastic automotive parts
Experienced with AutoCAD
One year in the shop as a machine assembler and a machinist.
10/89 - 3/92: Butterball Farms, Grand Rapids, MI
Engineer
Machine design of food processing equipment, from original concept to design and build on AutoCAD
Conformed with FDA Good manufacturing practices (GMP) and USDA Standards
Purchased components
Supported manufacturing
1/89 – 10/89: Kellogg’s Corporation, Battle Creek, MI
Designer (Contract position)
Machine design of food processing equipment on Microstation CAD
11/87 – 11/88: E.W. Bliss Company, Hastings, MI
Engineer
Designed rebuild kits for stamping presses in the Customer Service Department
Supported customer Service inquires
TRAINING: Project Management prep course (2008), Risk Management (2007)
Geometric Dimensioning and Tolerancing 1 and 2 (2007)
Export Classification & Harmonized Tariff (2009)
Self trained on Pro/Engineer Wildfire
SolidWorks: Essentials, Advanced Part Modeling, Assembly Modeling, File Management, Motion, Routing Electrical, Simulation & Surfacing
SKILLS (computer):
MS Office, MS Visio, Adobe Standard, WebEx, SAP,
Autodesk Inventor 2014, Unigraphics/Teamcenter, Solidworks and Pro/Engineer
VIP Activity management software, WelcomRisk
CERTIFICATION: Certified Solidworks Associate (CSWA), 2015
Project Management Institute Certification (PMP)
Unigraphics/NX Automotive CAD Interior Trim Certificate