Engineer Quality Control
Resume:
DAVE VILLARAZA ESTRELLADO
Doha Qatar
Mobile: +974-********/+974********
Email: *************@*****.***
Objective:
To obtain a position where I can utilize and further developed my knowledge and strength in the field of construction.
Engineering position wherein an extensive experience and expertise in MEP and semiconductors assembly, project implementation, test processes, equipment control and maintenance job could be applied.
Working Experience:
Company : EGIS RAIL (Project Management Consultant)
Project : RLN EAG / GRN EAG (Doha Metro)
Doha Qatar
Position : Construction Assurance Engineer (MEP)
Inclusive Date : June 20, 2015 to Present
Duties and Responsibilities:
Review and approve the basis, specifications and other design documents prepared by Contractor / Sub – Contractor and ensure adherence to Company / International Standards & Specification with minimum deviation.
Reviews in detail all submitted shop drawings, certification of compliance, Reviews in detail all submitted shop drawings, certification of compliance.
Site monitoring and Site Observation.
Witness pre-inspection & actual inspection activities and ensure full compliance with project requirements.
Review Project specification and report directly to MEP Manager.
Specifications issue and ensure with the contractor that works are in line with the project outline
Review and approve of Elevated, at grade and stations EP and ventilation design.
Review and comment of drawings, calculations and, testing & commissioning procedures.
Detailed design for accessibility, maintainability and safety during construction and for future maintenance.
Good knowledge in underground design and construction such as large culvert,storm and foul drainage system, potable water network, electrical ducting, domestic gas pipe network and telecommunications ducting.
Experienced and effective in site construction management and supervision Mentoring and coordination of design and site Civil/MEP Engineering team as well as multi-disciplinary and departmental design and project coordination on a multi-cultural set-up, with passion and drive in achieving through tight deadlines.
Company : HYUNDAI ENGINEERING & CONSTRUCTION
Project : National Museum of Qatar
Doha Qatar
Position : MEP Site Engineer / QA/QC
Inclusive Date : July 21, 2012 to June 6, 2015
Duties and Responsibilities:
Responsible for implementing HVAC equipment,ducting and air devices installation.
Coordination with EPC Contractor for execution of the work related to HVAC in the site.
Responsible for the preparation of quality procedures to be adopted and implemented at the site, and seeks approval from the client.
Performs quality control inspection and construction activities to ensure compliance with project specifications. When the results reveal any non-compliance with applicable specifications, directs immediate and appropriate corrective actions.
Responsible for the preparation of quality procedures to be adopted and implemented at the site, and seeks approval from the client.
Performs quality control inspection and construction activities to ensure compliance with project specifications. When the results reveal any non-compliance with applicable specifications, directs immediate and appropriate corrective actions.
Communicate with EPC Contractor Office/s and site to ensure proper execution of the work related to HVAC.
Responsible for the preparation of quality procedures to be adopted and implemented at the site, and seeks approval from the client.
Performs quality control inspection and construction activities to ensure compliance with project specifications. When the results reveal any non-compliance with applicable specifications, directs immediate and appropriate corrective actions.
Reviews in detail all submitted shop drawings, certification of compliance, manufacturer literature, material sample and guarantee equipment data.
Conducts periodic site inspection and prepares reports when corrective action requests have been raised, undertakes follow-up actions to determine the effectiveness and completion of action.
Ensures that approved design documents are reviewed prior to implementation for effective quality assurance and control.
Oversee the implementation of the detailed quality assurance and control plan of the company. Ensures that only top quality goods are being supplied as per materials approval.
Responsible for MEPFS Coordination with other trade contractors with respect to technical and commercial issues.
Performs installation and construction activities such as HVAC, Sanitary Plumbing, Chilled Pipes Water line and Fire Fighting System
Review in detail all approved material submittals and shop drawings prior to implementation.
Responsible for material inspection during deliveries together with the Owner Representative
Responsible for Monthly and Weekly accomplishment for mechanical and electrical works
Perform other duties as may be required by the QA/QC Manager.
Company : BASEELAH MECHANICAL WORKS
Project : Manifa Co Generation and Main Substation project
Manifa Industrial and Support Project
Manifa Off Plant Facilities (ARAMCO PROJECT)
Eastern Province, Kingdom of Saudi Arabia
Position : MEPF QC/Site Engineer
Inclusive Date : December 2010 to November 2011
Duties and Responsibilities:
Responsible for proper implementation of quality system procedures at site
Ensures that only top quality goods are being supplied as per procurement
Responsible for the implementation of detailed quality assurance and control plan of the company
Performs quality control,installation and inspection construction activities(such as HVAC, Sanitary Plumbing, Chilled Pipes Water line and Fire Fighting System) to ensure compliance with contract specifications when the results reveal any non-compliance with applicable specifications, directs immediate and appropriate corrective action
Review in detail all approved material submittals, shop drawings, material samples and guarantee equipment data in compliance with quality assurance of the company
Conducts regular site inspection and test and prepares reports; when corrective action requests have been raised, undertakes follow-up action to determine the effectiveness and completion of the action
Ensure that all installation activities are implemented in accordance with approved method statement to avoid reworks
Responsible for material inspection during deliveries together with the Owner Representative
Responsible for the inspection of installation work activities with the Owner Representative
Responsible for internal testing of the system and final test inspection by the Owner Representative
Responsible for the Testing Balancing and commissioning of HVAC system, Sanitary/Plumbing, Fire Fighting system& Chilled Water pipes.
Ensure that balancing of Air and Water of HVAC system are implemented in accordance with the approved design considerations
Perform other duties as may be required by the Superior
Reports directly to the QA/QC Manager
Company : BASEELAH MECHANICAL WORKS
Project : Al Othman Twin Towers
Al Khobar, Kingdom of Saudi Arabia
Position : HVAC Project Engineer
Inclusive Date : June 2010 – December 2010
Duties and Responsibilities:
Responsible for implementing HVAC equipment, ducting and air devices installation.
Responsible in giving instructions to skilled workers.
Responsible for materials requisitions for project use.
Perform daily progress report.
Perform monthly billing accomplishment report.
Coordination with client according to time plan and executions.
Perform Inspection for delivered materials.
Raised Request for Inspection for installed HVAC equipment and accessories.
Responsible for overseeing and implementing mechanical aspects of the Quality Control Program
Attending the QC plan meetings and Coordination and Mutual Understanding meetings.
Perform the three phases of control and document each definable feature of work in my area of responsibility throughout the installation, testing and commissioning.
Stop immediately any segment of work that does not comply with the plans and specifications.
Assist and report to the QC manager.
Identify safe and unsafe conditions.
Company : BASEELAH MECHANICAL WORKS
Project : Maaden Phosphate Project(SAMSUNG ENGINEERING)
Raz Al Zur, Kingdom of Saudi Arabia
Position : HVAC Project Engineer
Inclusive Date : October 2009 to June 2010
Duties and Responsibilities:
Over all in charge for the proper implementation and installation of equipment for HVAC and control systems
Responsible for manpower, materials and equipment scheduling in accordance with the construction work schedule
Ensures that the layout and installation of equipment are in accordance with the Design and Construction Drawing
Monitoring of installation work accomplishment report as required by the owner
Conducts site inspection test and prepares weekly accomplishment report as required by the owner
Responsible for quality control of delivery of equipment and materials as per approval and specifications
Responsible for testing and commissioning of the installed HVAC equipment
Company : Philips/NXP Semiconductors Philippines
Project : Manufacturing
Cabuyao, Laguna, Philippines
Position : Equipment Maintenance
Inclusive Date : July 1998 to January 2009
Duties and Responsibilities:
Provides Equipment-Engineering support in terms of conversion of machines, preventive maintenance and Manufacturing Capabilities in order to ensure fulfillment of business targets
Perform major repair of machines. Perform maintenance activity; calibration, improve equipment capability, machine set-up and conversion in order to meet Productivity, Cost, and Efficiency targets.
Sustain and maintain all frontline equipment (Diebond, Wirebond, and other frontline related tools and equipment) in good working condition. Coordination with Process Engineers/Technicians in solving process related problems.
Sustain and maintain all Machine temperature profile, Machine set-up and Parameter settings, Spot Audits, reports and qualifications and Kappa test correlation.
Perform minor repair of machines .Perform maintenance activity and machine set-up.
Sustain and maintain all frontline equipment (Diebond, Wirebond, and other frontline related tools and equipment) in good working condition. Coordination with Process Engineers/Technicians in solving process related problems
Educational Attainment
TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
Bachelor of Science in Electrical Engineer
March 1992 – 1996
PAMANTASAN NG LUNGSOD NG MAYNILA
Bachelor of Science in Electronics and Communications Engineer
May 1989 – 1992
Computer Related Skills:
ACONEX, Basic applications using Microsoft Windows, Microsoft Word, Excel, Power point. Auto cad 2011, Etc….
Training and Seminar attended
Statistical Process Control
Programmable Logic Control
Pneumatics Control and Design
Industrial Pneumatics
Over all Equipment Effectiveness
Failure Mode And Effect Analysis(FMEA)
Calibration Principle (ORTHODYNE)
ESEC 2005 Machine TPM
ESEC 2007 SSI Basic Training
ESEC 2005 APLF Advance Maintenance Training
Orthodyne M360 Advance Maintenance Training
IPAS Basic Maintenance Training
Delvotec 6830 Advance Maintenance Training
Fire Brigade Training
First aid Training
Basic Life Support Training
Phenomenon Mechanism Analysis Training
IPAS 100 Technician Training
X-RAY Radiation Training
MOULDING TECHNOLOGY
BASIC UNDERSTANDING OF OPU
PHILIPS WAY
CODE OF CONDUCT
SPEED PLANT MAINTENANCE
Alphasem MSU Training
Alphasem Basic Operation Training
Alphasem Machine Buy-off / Training Aug 6-11 K&S Suzhou, China
Autocad Module 1 Informatics Laguna
Scaffolding Training Samsung site K.S.A
Working at heights Samsung site K.S.A
Safety Leadership Training Samsung site K.S.A
Firewatch Samsung site K.S.A
Lockout Tagout Training Samsung site K.S.A
Personal Data
Age : 43 years old
Date of Birth : May 10, 1973
Sex : Male
Civil Status : Married(With 3 Kids)
Height : 5’5
Weight : 165 lbs.
Citizenship : Filipino
Languages : English / Tagalog
Passport No. : EC7304555
Contact this candidate