Resume

Sign in

Safety Officer Mechanical Engineering

Location:
Philippines
Posted:
January 04, 2017

Contact this candidate

Page * of *

NoelbertUmandalQuitong

No.** Sitio Pulong Banal(Madre),

Brgy.SanJose,Antipolo,City(1870)

Philippines.

Mobile: +639369573259

E-mail: acx35h@r.postjobfree.com

Technical Knowledge includes:

Knowledge in Safety Aspects

o Environment Safety and Health for General industries, Constructions and Oil&Gas.OSHA (Occupational Safety and Health Administration) o H2S Safety SCBA

o Standard First Aid with Professional CPR and AED Instruction.

Pollution Control Officer (Department of Environment and Natural Resources) o RA 8749 (Clean Air Act of 1999)

o PD 984 (Pollution Control Law)

o RA 9275 (Philippine Clean Air Act)

o PD 1586 (Environmental Impact Statement System)

o RA 6969 (Toxic Substance and Hazardous Waste Control Act) o RA 9003 (Ecological Solid Waste Management Act)

o Writ of Kalikasan

Knowledge in MS Office and basic AUTOCAD

Knowledge in Sub-Sea Control System Testing & Maintenance

Knowledge in Machine Predictive/preventive maintenance

Knowledge in Automotive Troubleshooting and maintenance.

Knowledge in Basic Arc and Gas welding

Knowledge in Forklift Driving Operation/ maintenance

Knowledge in Over head Crane Operation and Rigging

Knowledge in Hydraulic Fluid Cleanliness/Micrometer Count

Knowledge in Basic Electrical trouble shooting

Knowledge in Pneumatic and Hydraulic Base System PERSONAL DATA:

DATE OF BIRTH : January 19, 1976

AGE : 38 years old

HEIGHT : 5’9 “(175 cm)

WEIGHT : 180 lbs

CIVIL STATUS : Married

CITIZENSHIP : Filipino

Religion : Roman Catholic

S.S.S .Number : 33-2331582-2

Drivers License Number : D19-01-008522

Passport Number : EB9977729 (Valid Until -2021)

EDUCATION:

Rizal Polytechnic College

Diploma in Mechanical Engineering Graduated (1996-1999)

(Mechanical Production Engineering Technology)

Two year Automotive Mechanic (Gasoline & Diesel Engine) Graduated (1992-1994) Page 2 of 4

TECHNICAL CERTIFICATION (Training & Seminars);

D&L Industries Inc and Affiliates

Values Formation Seminar

ISO 9001:2000 Awareness Seminar

RODECH Training Services Link Int’l. Inc

Unit 310 Guadalupe Commercial complex Edsa, Guadalupe Nuevo Makati 1212, Philippines

Safety Officer Training Course for Construction, Petrochemical and Oil & Gas With Drilling Technology

OSHA 10-Hours of General Industry Safety and Health

OSHA 30-Hours for Construction Safety and Health AKER Solutions Malaysia SdnBhd

Port Klang Free Trade Zone (KS12)

42920 Port Klang, Malaysia

Safety Training Program May 29-June 11,2008

.

Autoclave Engineers Fluid Components,

Products, Coning and threading operations

McDermid Training Hydraulic Fluid Cleanliness/Microscope Count o NAS 1638

o AS 4059

Construction and Industrial Safety Training Centre Sdn.Bhd. KualaLumpur,Malaysia

Rigging and Slinging Course

Overhead Crane Operator Course

Forklift Operators & Safety Training.

Technical Education Skills Development Authority

CNC Milling Operator-

Meralco Foundation Institute

Ortigas, Pasig City

Philippines.

Pneumatic Industrial Control (42hrs.)

AutoCad 2004 (42hrs.)

Department of Environment and Natural Resources

Tagaytay Country Hotel,Olivarez Plaza,Aguinaldo Highway,Tagaytay City Philippines

Basic Pollution Control Officer Course (40 hrs.) AFFILIATION / ACCREDITATION:

MEMBER: International Association of Safety Professionals RODECH PHILIPPINE CHAPTER

IBOEHS Registered Safety Officer for Oil & Gas and Construction International Board of Environmental Health and Safety, Inc. License No.2222 Tucson Arizona, USA

Philippine Mines and Geosciences Bureau /CALABAR Safety Inspector Technical Education Skills Development Authority (TESDA) 3rd class Lathe Machine Operator Page 3 of 4

WORK EXPERIENCE:

J.Gatlabayan Trucking Inc Equirent (Equipment Rental), SitioTagbac, Barangay San Jose Antipolo City(1870)Philippines Position: Operation’s and Safety Officer April 2014-Present

Perform daily routine inspection of all crews/technicians, in order to assure that all their task was properly accomplished in a safe, effective and efficient manner.

Perform regular jobsite inspections of all crews in order to identify any unsafe work practice and unsafe conditions.

Ensure communication of HSE policy, applicable legal requirements, HSE information and lesson learned were address/explained to all employees.

Conduct / prepare Risk assessment, Job Hazard analysis, Risk and Impact assessment, Permit to work, Method Statement during and after project.

Conduct and review risk, aspect impact assessment, and ensure proper implementation of control measures

Lead / Facilitate / Participate in accident / incident investigation and reporting as necessary and follow up the corrective actions until completion.

Develop and review HSE procedures to align with business needs, legal and other applicable requirement.

Responsible for the coordination of supplemental inspections when new equipment, substance or processes are introduced as well as new or formerly undistinguishable hazards are discovered.

Control of Hazards (Situation or condition that has a potential for producing illness, injuries, damage to properties and environment)

Assure that company property and working area / premises are properly secured along with the security personnel/Agency.

Ensure all new employees are inducted properly into the Company and Project site HSE rules and regulations

Conduct job estimate and reporting in accordance with the amount of damaged of the equipment.

Make sure that proper firefighting equipment and first aid supplies are kept on good and safe condition

To create a proactive health and safety culture in the company

Conduct /attend company routine tool box meetings.

Act /serve as a Pollution control Officer in accordance under DENR administrative order 2014-2 Solid Cement Corporation (CEMEX) /APO Cement (Ilo-ilo) January –March 2014 Solid Cement Plant, SitioTagbac, Barangay San Jose Antipolo City(1870) Philippines

Position: Safety Inspector (2013 KILN SHUTDOWN) Feb. 2013- April.2013

Report Directly to Solid Cement Corporation Safety Officer/Engineer

Conducts daily toolbox meeting to different sections or areas

Conduct tools and equipment inspections

Conduct site walk-about daily

Ensure compliance with permit to work system as applicable.

Assist in reviewing job hazard analysis and signing of permits such as, JHA, hot works, confined space, working at heights and other requirement permits

Apprehend workers/personnel that violates any Plant EHS Rules and regulations

Give recommendations regarding the correction of identified hazards

Attend daily safety officers meeting

Prepare required reports by SCC EHS Department

Work beyond regular working days or hours

Visible at the Plant Site at all times

Perform other task and functions that may be assigned from time to time.

Ensure subcontractors are aware and comply with SCC HSE rules and regulations on site. Page 4 of 4

AKER Solutions Malaysia Sdn.,Bhd May 2008-June 2012 Jalan FZ4-P2/3 Port Klang Free Trade Zone (KS12)

42920 Port Klang, Malaysia

Position Mechanical Technician, (Subsea Control Module)

Carry out routine assembly, test, repair and/or refurbishment of Control Module equipment use in Subsea. Includes, FIT/FAT, comprehensive practical knowledge of hydraulic systems to 10,000 psi operating pressure including: pressure testing, and recording, hydraulic flushing and cleanliness testing and basic faultfinding.

Carry out Assembly, test and repair refurbishing (SCM),High pressure valve and test Rig .

Perform routine strip down, assembly and test activities in line with work instructions and standard operating procedures, under general guidance and complete all activities identified within the department work packs.

Carry out Hydraulic Fluid Cleanliness test as per Mac Dermid Offshore solutions standard (ARP598B, NAS 1638 and AS4059) Microscope Count.

Perform routine test of Drilling Riser pipe (Hydraulic, Mud booster, Choke and kill) As per Aker solutions and Clients Specifications.

Perform Hydrostatic test.

Carry out any other requirements needed to allow the company to operate efficiently including project specific quality plans.

Client Technical support during Factory Integrity Test/Factory Acceptance Test with client witness. Position: Safety/ HSE Officer

Assist In the monitoring and evaluation and inspection on the project site

Ensure that safety equipment and facilities and used at all time

Tabulate and report safety related accident in the project sites

Assist in the development and Implementation of safety training

To perform Duties and Responsibilities of Safety Officer in the implementation of environmental health and safety related activities;

Ensure that employees / workers are free from danger, unsafe practice, risk or injuries on the work places.

Conduct daily evaluation on project site

Prepare and submits necessary report and requirements required by managements

Perform other management mandated function.

Shanghai Yi Chung Plastic Film product Inc, Ltd. Aug.2003-April 2004 Xidutown,Shanghai

Republic of China.

Position: Mechanical Technician

Duties and responsibilities:

Ensures equipment, materials and tools are on-hand for work execution.

Implementation of routine PM checks including vibration & temperature inspections on designated rotating equipment and ensuring logging or recording of all readings; includes preliminary assessment and reportage on as found conditions.

Ensuring mechanical spare parts availability for scheduled and projected jobs inclusive of spare inventory

(physical) checking and stock inspections and preliminary liaison with Suppliers and Vendors for proposals etc.

Equipment Problems Trouble-shooting and Basic Root Cause Analysis and Development of Solutions .

Repairs to other static equipment as required – valves, pipe-work, pressure vessels and tanks and such-like Aero pack Industries Inc.,( D&L) Aug.2001-July 2003 Libis,QuezonCity,Philippines

Position: Mechanical Technician/Maintenance:

Duties and responsibilities:

Ensures equipment, materials and tools are on-hand for work execution.

Implementation of routine PM checks including vibration & temperature inspections on designated rotating equipment and ensuring logging or recording of all readings; includes preliminary assessment and reportage on as found conditions.

Ensuring mechanical spare parts availability for scheduled and projected jobs inclusive of spare inventory

(physical) checking and stock inspections and preliminary liaison with Suppliers and Vendors for proposals etc.

Equipment Problems Trouble-shooting and Basic Root Cause Analysis and Development of Solutions .

Repairs to other static equipment as required – valves, pipe-work, pressure vessels and tanks and such-like



Contact this candidate