Hans U, Berg

**** ********* ****

Norfolk, Virginia 23503

(HM) 757-***-****

(C) 757-***-****

acx2uj@r.postjobfree.com

CAREER SUMMARY

Following a ten-year career in the U.S. Navy, specializing in Antisubmarine

Warfare, more than 25 years' experience in training and installation of

military and commercial Fiber Optic systems. Extensive supervisory

experience in Fiber Optics technologies with an emphasis on U.S. Navy

projects. Continuing education and leadership experience in leading-edge

fiber optic technologies.

PROFESSIONAL EXPERIENCE

Epsilon Systems Solutions, Inc.

(February 2014 - Present)

Senior Project Manger(PM)/Coordinator - Fiber Optic Subject Matter Expert

Assistant Project Manager for the installation of the Steering Control

upgrades on the USS Harry S. Truman (CVN-75). To include all portions of

the fiber optic cable plant (blown optic fiber and conventional). Onsite

Project Manager for the ADMACS, Block 2, Phase 1 installation onboard the

USS George H. W. Bush (CVN-77). During this installation had a crew of

approximately 60 people working (structural, electrical and cosmetics)

under him. Had to track a budget of approximately $2.3M to include labor

hours and materials. Was the acting onsite foreman for fiber installations

on USS Carter Hall (LSD -50) CANES installations, and USS Dwight D.

Eisenhower (CVN 69) IFLOLS Phase IV. Installation to include associated

blown fiber installations.

Provides onsite training and initial supervision of Installation teams

onboard USS Ronald Reagan (CVN 76) during an availability in San Diego, CA.

Responsible for the development and implementation of fiber optic

installation program to include training and qualification of technicians,

supervision of all installation teams to include testing and QA of

installed systems. Wrote and developed the company's in-house fiber optic

training program. Collaborated along with other DOD contractors in writing

the Fiber Optic Training course for American Maritime Modernization

Association (AMMA); to facilitate a stronger understanding and certificate

program within the US Navy.

L-3 Unidyne, Engineering Technician V April 2012

- February 2014

Responsible for the development and implementation of a fiber optic

curriculum. Conduct fiber optic training of all L-3 Unidyne technicians

in various programs. To update company Technical Work Procedures (TWP),

qualifications and Quality Assurance (QA) programs. Assist in writing TWP,

Cable matrix and travelers; coordinate the shipping of materials and

technical support. Assist in the maintenance, installation, test and/or

repair of submarine systems and equipments including AN/BQQ-10, AN/BSY-1,

OA-9070, OK-276 and associated auxiliary sonar equipment. Providing

technical submarine acoustic systems support during Combat Systems

Readiness Reviews in regard's to fiber optics, In Service Inspections,

system grooms and Combat Systems Assessment

KITCO Fiber Optics Manager of Field Services/Senior Instructor October

1998 -April 2012

Responsible for the business development of the department and the writing

of estimate, Statements of Work (SOW). Other duties and responsibilities

include daily operation and scheduling of field services team(s).

Coordinates all inquiries for Field Services with customers and various

divisions and maintains customer relations with numerous clients both

military and commercial. Provides technical assistance to customers and

coordinates troubleshooting activities. One of only two certified/approved

Blown Optical Fiber (ABF) instructors and lead troubleshooter for the

manufacturer, General Cable Corporation. Only person qualified as

inspector of ABF system in accordance with manufacturer and military

specifications. Provided technical assistance to military installations

and for Field Services projects. Performed emergency LLWAA system repairs

on the USS Virginia for Electric Boat Corporation. Installed Fiber Optic

backbone onboard the newest designed nuclear submarines. Maintaining,

terminated and re-termination and inspection of fiber optic cables at the

school house (Gallery and Taylor Hall) at NB Dam Neck. INSURV inspections

on DDG's, CG's and CVN class ships. Involved in the testing and repair of

the MC3/MK-II for the GPS and CIWS system(s) onboard the USS Ronald Reagan

and other naval ships. Specialized in the proper repair and testing of the

hermaphroditic connector in accordance with the MIL-STD-2042B. Terminated

and tested fibers on various platforms/systems to include GEDMS, SQQ-89 (A)

V-15, Smart-ship, ADMAC, GIG-E on LPD class, SSDS and NSSM Repaired

aviation fiber optic cables on the F/A-18, AV-8, Boeing 757 and 727 and the

blimps used by the US Marine Corps, NASA and the US Navy. Conducted the

termination and testing of fiber for the Pakistan Navy on the CIWS system

purchased through FMS. Assisted in the troubleshooting of one the United

States Secret Service training sites

KITCO Fiber Optics Instructor

Increased the number of classes offered annually by almost 300%. Revised

and edited the curriculums for both military and commercial training

classes. Developed the commercial training manual and study guide, and

developed the military training manual and study guide used at the Fleet

Training Center. Assisted in the development of the Air Blown Fiber Optic

[(ABF) Blolite] manual and course used by General Cable Corp. Assisted in

tool kit development and in curriculum/training sales activities. Assists

in curriculum development and conducts Aviation (38999) training.

Responsible for re-certification of other KITCO instructors. Conducted

shipboard CSRR and assisted in reviewing MIL-STD-2042. Constructed

Measurement Quality Jumpers (MQJ) in accordance with MIL-STD-2042.

Provided onsite technical assistance and troubleshooting. Conducted

training classes for 3M on all fiber optic connectors.

Analysis and Technology - Electronics Technician II September1992 -

October 1998

First level Supervisor for electronics technicians. Assisted in the

development of numerous engineering changes for the AN/SLQ-25A. Involved

in special Navy (CNO) projects involving fiber optics. Performed major

structural reconfiguration to facilitate the installation of the Mk 32 SVTT

launchers. Member of the Alteration Installation Team (AIT) for the AN/SLQ-

25A and AN/SQQ-89. Conducted and performed the installation of the AN/SLQ-

25A onboard foreign military ships. Performed all the ordering, assembling

and shipping for the SHIPALT's. Assisted in the installation of the

conformal array onboard the USS Duluth, as a special US/UK project.

Liaison between the Turkish Navy and the German shipyard (Blohm+Voss AG)

for the installation of the AN/SLQ-25A onboard the TCG Salihreis.

Planning Consultants, Inc., Systems Analyst October 1989 -

December 1991

Generated and used software trouble reports, technical reports and

engineering proposals. Conducted in-house acoustic software training.

Provided test and evaluation as Test Director and System Operator for the

LAMPS MK III. Conducted system interoperability testing.

U.S. Navy - Antisubmarine Warfare Operator August 1979 - August 1989

VS and HS aircrew qualified. Coordinated training and operational missions

for East Coast squadrons. Conducted Pre-flight, post-flight acoustic

analysis and mission briefings.

EDUCATION AND SPECIAL TRAINING

. Certifications:

o Aviation Fiber (Instructor Certified) KITCO Fiber Optics

o OTDR (Instructor Certified) G.N. Nettest

o Fusion Splicer (Instructor Certified) Alcoa Fujikura

o Fiber Optics (Instructor Certified) 3M (All connectors)

o Fiber Optics (Instructor Certified) 3M (Volition)

o Fiber Optics (Instructor Certified) AMP (ST, SC, MTRJ)

o Air Blown Fiber (Instructor Certified) General Cable Blown

Fiber

o Installation/Splicing (Instructor Certified) Lucent

Technologies

o Military Fiber Optic (Instructor Certified) Delphi

Connection Systems

o SAE FAB ETA

o FOI and FOT certified ETA

o Certificate of Appreciation from United States Secret Service

o Clearance: SECRET

Contact this candidate