Engineer Loss Prevention
Resume:
Name:
RAHUL RAJAN PATTERI
WORK EXP:
** ***. – Onshore & Offshore
DEGREE:
MSc (Eng) PROCESS SAFETY & LOSS PREVENTION
(UNIVERSITY OF SHEFFIELD)
CERTIFICATION:
Chartered Engineer
Strength:
Consequence Analysis
Qra / Fra / Fera / Eera/ Essa
Comah / Pfeer Legislations
Ram / Fmea / Fmeca
FW Deluge / F&G / HAC
Dimensioning of accidental loads - exceedance study
Technical Report Writing
Software proficiency:
dnv phast / phast risk v6.7
shell fred v.6.0 / shepherd v3.0
cfd flacs v9.0
pipenet / flaresim / availability work bench
contact:
*************@*****.*** *****.*******@*****.***
Being 11 years in the field of Process safety & Loss Prevention, covering all aspects of REFINERY OPERATIONS, ONSHORE & OFFSHORE engineering and operations, i.e.
Offshore / Onshore Field O&G Risk Management
Conceptual, FEED & Detail Engineering
Process safety & Risk Consultancy
Process safety Management (PSM)
Process Safety, Site Safety & Loss Prevention Training
Loss Prevention Operations & Maintenance
I intend to use my knowledge and experience to enhance HSE performance for the COMPANY
My career progression is tabulated below:
COMPANY
DESIGNATION
PERIOD OF EMPLOYMENT
Abu Dhabi Marine & Operating Company (ADMA-OPCO)
Corporate HSE & Risk Engineer
January 2014 till date
Arcadis Vectra Middle East
Senior Risk Engineer
April 2012 till January 2014
Petrofac International Limited, Sharjah
HSE Design Engineer
June 2010 to April 2012
Maire Tecnimont
Senior HSE Design Engineer
October 2007 to June 2010
Reliance Industries Limited, Jamnagar
Loss Prevention Engineer/Fire Fighter
May 2006 to October 2007
I am a Post graduate in MSc(Eng) Process Safety and Loss Prevention from the University of Sheffield
http://tinyurl.com/oh92ecc
My undergraduate degree is, Safety & Fire Engineering (Honors) from the CUSAT (Cochin University of Science and Technology, India)
http://safe.cusat.ac.in/saf/index.php?dept=saf
I am
I am looking forward to work with a well-established international company which gives the opportunity to grow professionally and personally
Thanking You
Yours faithfully
Rahul Rajan Patteri
Note:- Please find enclosed my CV
Phone:
+971(0)555269821
+91(0)989-***-****
+91(0)497-***-****
E-mail:
*************@*****.***
*****.*******@*****.***
CAREER PROGRESSION
1.Employer : ADMA OPCO
http://www.adma-opco.com
Period : January 2014 – Till Date
Role : Corporate HSE & Risk Engineer
Being part of the Corporate HSE&Q Division in ADMA-OPCO, I am responsible for managing and ensuring that all the GREENFIELD and BROWNFIELD projects (CONCEPT, FEED, EPC) comply with ADMA OPCO / BP standards and guidelines:
Develop Terms of Reference and actively participate in HAZID / HAZOP / Design reviews / Sector Analysis / Constructability review and other workshops.
Assess and ensure HSEIA / Safety Case (COMAH, ERP) are in compliance with ADNOC CoPs, to ensure risk to personnel and Business Interruption risks are ALARP.
Participate in the Implementation of Process safety management (PSM) as per CCPS – RBPS and Business Continuity.
Participate in Incident Investigations and assist in analyzing the Root Causes, and providing risk based recommendations for implementation and as Lessons learnt. .
Liaise with the Construction and site management to ensure safe working practices for the COMPANY’s operating Assets, e.g. Das Island, USSC (Umm Shaif Super Complex), SARB, Umm Lulu etc.
Conducting In-House / refresher Training for COMPANY personnel and CONTRACTORs
Primary responsibility
Projects Handled & the Scope of Work in Chronological order:
PROJECT / PHASE
SCOPE OF WORK
ACTIVITIES INVOLVED
SATAH AL RASBOOT (SARB) FIELD DEVELOPMENT
EPC (EXECUTE)
Artificial Island Construction
Accommodation / Administration & Fire Station building
Flare system
SPM
Building Architectural Review as per COMPANY std & BP GP 44-10
Building design review, i.e. blast resistance rating, fire rating as per ADNOC CoP 4-03 / 5-03 & BP GP 24-24
CFD Dispersion and Explosion Assessments
Temporary refuge Assessment as per COMPANY stds & BP GP 44-30, BP GN 44-100
Fire & gas Layout review as per COMPANY std & BP GP 30-85
Fire water Sprinkler calculation review as per NFPA 13
Clean Agent calculation review as per NFPA 2001
Flare radiation and dispersion study review as per API 521 & BP GP 44-80
Design reviews for Flare system & SPM
Review HSEIA / Performance standards
Long term Offshore Power Supply Project
Concept (ASSESS)
Integration & Centralization of Power for all COMPANY assets
Option Selection Study
FMEA and FMECA review
RAM review for the network distribution options
Umm Shaif & Zakum Long term Accommodation Expansion
Concept (ASSESS)
Increase the accommodation to facilitate for 2019 POB
Option Selection Study
Layout Review as per COMPANY std & BP GP 44-10
Calculation of incremental risk as per ADNOC CoP 5-03 & 5-06
Helideck orientation as per CAP guidelines.
Material Handling Workshop.
Umm Shaif - Long Term Development Plan
Concept (ASSESS)
Increase the number of WHTs and develop new reservoirs
Layout and feasibility review of options for locating various WHTs within the US Field
HAZID / HAZOP
Constructability Review workshops
Umm Shaif & Zakum Conversion
FEED (DEFINE)
Conversion of Auto-injector well head to oil producer
Provision of gas lift facility to existing oil producer
Escape route layout review in accordance with COMPANY std and BP GP 44-10.
Constructability workshop review and participation.
DAS Island – Long Term Development Plan
FEED (DEFINE)
Upgradation of Tankfarm
Tank farm layout in accordance with COMPANY and
BP GP 44-10 & API 650
Tank farm fire protection requirement in accordance with
BP GP 24-20, The Last Fire Report, BUNCEFIELD 2005 recommendations, CAPECO 2009 recommendations & Thermal radiation Thresholds.
Incident Investigation
Process safety Subject matter expert
Preparation of Root Cause Analysis (RCA) for Barge Gripper Failure
Preparation of RCA on Aluminum Helideck Corrosion
IN-HOUSE Trainings
Technical HSE familiarization for Engineers on the Project
Introduction Trainings on:
oInherent Safety
oHAZID, HAZOP
oQRA, FRA,
oHSECES
oIncident Investigation
oADNOC & ADMA Codes of Practice
2.Employer : Arcadis Vectra Middle East ( Abu Dhabi )*Merged with EC Harris on 2014
http://www.echarris.com/
Period : April 2012 – January 2014
Role : Senior Risk Engineer
Being part of a process Safety Consultancy, we are expected to deliver an unbiased and calculated estimate of the existing and / or incremental risks to the facility, and provide services to ensure that the risks are reduced to ALARP:
Mentor and manage the Junior Risk Engineers
Projects Handled & the Scope of Work in Chronological order:
JOB/TASK
DESCRIPTION
STANDARDS / DOCUMENTS REFERRED
FERA
(Fire Explosion Risk Assessment)
UZ750k Upper Zakum Artificial islands
API 520 / 521 / 2001 / 2030
NFPA 15 / 30 / IEC 60331/2
Shell DEP 80.47.10.30
Scandpower guidelines
QRA (Quantitative Risk Assessment)
QP and Dolphin interconnecting pipeline project for TECHNIP
OGP / TNO Purple Book
QRA Vol 12 (Taylor associates)
QP Dukhan NOx reduction project for Worley Parson
Turbine explosion accidents
Connecticut gas blowby case study
EERA (Escape Evacuation & Rescue Analysis)
Saudi Aramco Al Wassit platforms for SAIPEM
GS EP SAF 351 / BP RP 44-9 / CAP 437
CMPT – DNV Spouge
IChemE Symposium papers
HSEIA:
COMAH
ERP
Bow-Tie
H&ERs
Performance Standards
UZ750k Artificial islands Drilling Phase for ZADCO
ADNOC COPV5-01 /COPV6-01
UK HSE REGULATIONS ON COMAH
Umm Al Dakh drill stem testing for ZADCO
Samsung Nitrogen gas Injection project
RAM (Reliability, Availability & Maintainability)
QP FEED for Telemetry System Upgrade for Worley Parson
QP-PHL-S-001 QP Corporate Philosophy for fire and safety,
Handbook for Reliability, Availability, Maintainability and Safety in Engineering Design,
MIL-HDBK-217F–Military handbook– Reliability prediction of Electronic Equipment,
FARADIP, Failure Rate Data In Perspective,
Survivability of Multiple Fiber Duct Failures
QP Spare heat exchanger project for TECHNIP
QP Concept for ETP Optimization of NGL 1,2 3 and 4 for TECHNIP
Pre-Audit Compliance
Pre-Audit compliance assurance of Safety Management System
OHSAS 18001
ISO 9001
ISO 14001
3.Employer : Petrofac International Limited ( Sharjah )
http://www.petrofac.com/
Period : June 2010 – April 2012
Role : HSE Design Engineer
Projects Handled & the Scope of Work in Chronological order:
Assignment 1:
POSITION Deputed to Petrofac Malaysia from June 2011 to April 2012 as PMC
CLIENT Petrofac Floating & Production
PROJECT Refurbishment, Life extension and upgrading of the West Degaru MOPU
ROLE Précis:
Deputed to the Malaysian office (Petrofac E&C SD. Bud), acting as PMC and to co-ordinate with the Lead Engineer / Manager from the Sharjah Office.
The primary role was to conduct a gap analysis of the available MOPU (Mobile Offshore Production Unit) deliverables, and make the same fit for purpose for the expected design alterations to suit the Malaysian Class requirement.
Assignment 2:
CLIENT Qatar Petroleum - QP
PROJECT Gas Sweetening Facilities in Mesaieed & Dukhan, Qatar
ROLE Précis :
Supporting the design task force on the Loss Prevention deliverables.
Brief list of activities involved:
WEST DESARU MOPU
QP GAS SWEETENING FACILITIES
Site visits and preparation of the Site visit report.
Preparation of:
o Performance Standards for the HSECES.
oHazardous Area Classification Schedule as per API 500.
Review :
oHSE Design basis.
oQRA & FRA technical note.
oDesign Safety Case.
oCalculation of the revised Fire water demand.
o Passive Fire Protection specification.
oFire water PIDs.
oSafety Plan layouts to suit the ABS classification.
oHazardous Area Classification layouts .
Participation on HAZID, HAZOP & SIL studies
Preparation of :
oHazardous Area Classification report and schedule as per IP 15.
oPassive Fire Proofing Report and Schedule as per API 2218.
oHSE design basis, taking reference from QP HSE specification and best industrial practices.
oPreparation of the HAZID closeout report.
oPreparation of the HSE Engineering layouts
.Review :
oFlare dispersion report.
o3D model for checking the fire proofing consideration for the Shutdown valves, structures & supports mentioned in the Passive fire proofing report.
Perform Dispersion modeling report for the vents using SHELL FRED
Co-ordination and participation for HAZOP & SIL
4.Employer : Maire Tecnimont
http://www.mairetecnimont.com/en
Period : October 2007 – June 2010
Role : Sr. Design Engineer –HSE
Projects Handled & the Scope of Work in Chronological order:
Assignment 1:
POSITION Team Leader (From March 2008 to June 2010)
CLIENT Sibur Holding, Russia
PROJECT Detail Engineering for Propane Dehydrogenation (PDH) Plant, Tobolsk, Russia
LICENSOR UOP
ROLE Précis:
Responsible for managing HSE Design team, participating in PMC meetings, coordinating and brain storming with inter-disciplines on HSE issues and reporting the progress and revisions mandated, to my counterpart in the Milan office.
The team building and formulation of the deliverable list as per ITB and preparation of BEDD doc. started from Tecnimont Milan from March 2008, where I worked on deputation.
Assignment 2:
POSITION Team Player (From October 2007 to March 2008)
CLIENT Borouge-2 P.O. Plant
PROJECT Expansion of BOROUGE PP plant
LICENSOR Borealis
PROPANE DEHYDROGENATION (PDH), TOBOLSK
BOROUGE 2
Preparation of :
HSE General Specification, using ITB and Licensor documents.
Fire & Gas Detection and Alarm General Specification, as per NFPA 72, Tecnimont standards and Russian Requirements, VUPP-88.
Fire Protection General Specification.
Water Spray and Deluge Systems Technical Specification as per NFPA 15.
Steam Smothering System Technical Specification as per GOST-12.3.047-98.
Clean Agent System Technical Specification as per NFPA 2001.
Passive Fire Prevention Specification, as per API 2218.
Building Classification Report as per VUPP-88
Classification of Process Areas into blocks, on the basis of their energy release, according to PB-09-540-03 (Russian guidelines for Explosion Prevention and Mitigation)
Blast proof classification and averting the scenario by HVAC requirements, as per NPB-105
Preparation of:
oFire Water Demand calculation
oDeluge Water Spray mark ups for Compressors, pumps, the vessels and columns with inventory in excess of 2 m3 of Hydrocarbon (Bassel Standard).
oMark ups for U/G Fire Water network.
oMark ups for Fire and Gas detectors in the Process area and inside buildings.
oMarkups of isolatable sections as input for inventory calculation and frequency estimation for QRA.
5.Employer :Reliance Industries Limited (Refinery Division),
http://www.ril.com/
Period : May 2006 – October 2007
Role : Loss Prevention Engineer / Fire Fighter
Primary Responsibilities:-
Conducting trainings on:
oClass Room training on Fire safety preparedness within the refinery
oField training Use of Extinguishers, fire Water Hydrants, Monitors & fire hoses
oField Training Use of SCBA & EBA
oField training F&G Detection System, FM-200 system
oTraining on COSHH, MSDS.
Reviewing and commenting on the FIRE WATER P&IDs from BECHTEL, for the New Refinery Expansion, JERP Project (Especially for Tankages, Alkylation unit and Captive Power Plant) from the Client side.
Secondary Responsibilities:-
Assisting in the upkeep and maintenance of Fixed, Portable and mobile systems.
Achievements:
Most Proficient Trainee Engineer (FOPE) 2006 batch.
Voted as best Trainer.
Was in the first line fire-fighting crew during a major fire at the complex on the 25.10.2006
Personal Information:
DOB 25/04/1983
Nationality Indian
Passport Number Z2441067
References:
Dr. John King (Technical Director, MES)
Raj Kochar (VP-HSE, PIL)
Majidan Sadhu (HSE Manager, PIL)
Buonaventuri Rossano (HSE Leader, Maire Tecnimont)
Umesh Khandalkar (VP- Fire, Reliance)
Contact this candidate