Lorrie Johnson
PO Box ***
Clatskanie, OR *****
Resume
Blue Ox Logging
Kelso, WA
*/**** – Present
Construction Safety, Equipment Operations
Developed and updated site specific safety policies and procedures using JSA’s and other site documents
Determine PPE requirements.
Equipment operation – loaders, D-6 bulldozer
Assist with logging operations including setting chokers, hauling logs resand guiding the trucks to the correct deck
Responsible for determining the destination of each load of logs
Provide any required training per CFR 1926 under the construction codes
Morgan Corporation
Gallatin, TN
2014 – May 2015
Safety Manager, Construction
Developed and updated site specific safety policies and procedures using JSA’s and other site documents.
Directed and supervised on-site safety for the entire 90 acre site; including sub-contractors
Developed a course for and did all training for hazard waste operations and emergency response (HAZWOPER), 29 CFR 1910.120, confined space entrant/attendant/supervisor,29 CFR 1910.146, hazard communication, (1910.1200) PPE selection and chemical safety for employees.
Instructed new employees on the inspection, maintenance and operation of track hoes, bull dozers, loaders, 773 CAT dump trucks, 740 articulated dump trucks
Performed site audits, conducted safety meetings, new employee orientation and training
Supervised and documented accident/incident investigations.
Introduced standard operating procedures (SOP) and accident prevention programs that reduced the company’s lost time frequency rate.
Taught site specific PSM programs which included respiratory protection, chemical hazards using site MSDS material, confined space attendant/entrant and supervisor, hazard awareness, Developed an ongoing training course for hazard waste operations and emergency response
Performed site audits, conducted safety meetings, new employee orientation and training
I was licensed by the state of Tennessee as an erosion control inspector and was responsible for maintaining the integrity of our erosion control systems.
Shamrock Landscaping – 2014/2014
Hood River, Oregon
Site Supervisor/Safety
Equipment Operator
CAT 302.5 Excavator
Kubota tractor
CAT 247 Skidsteer
Lead daily safety meetings and oversee safety throughout projects
Assisting in the completion of a project addition for Hood River Waterfront park and additional projects
Assist with client project changes
Day to day direction of employees for timely job completion
JH Kelly, 12/2011 – 1/2013
Safety Professional
Introduced and conducted chemical safety/hazard communication classes for the Intel job site in Hillsboro, OR per 29 CFR 1910.1200
Site supervisor for an EPA hazardous waste removal project at the Georgia Pacific pulp and paper mill in Westport, OR. Performed air and soil samples, selected PPE, delineated work zones.
Worked with the EPA as required for the successful and quick completion of this project.
Did all employee training for the EPA hazardous waste removal project per 29 CFR 1910.120
Conducted safety inspections/safety audits daily in the field, ensuring compliance with all federal, state and local regulatory requirements.
Implemented industrial hygiene, hearing conservation and PPE programs at all sites.
Safety supervision for 200+ employees per shift.
Conducted Process Safety Management (PSM) training for employees.
Did all training for confined space including supervisor, entrant and attendant per 29 CFR 1910.146
Coastal Industrial Services, 6/2008 – 11/2011
Industrial Health and Safety Manager
Pulp and paper services include confined space work, cleaning hazardous materials commonly found in the pulp and paper industry - Nitric acid, sulfuric acid, Black, pink and white liquors and lime.
Introduced and conducted an on-site safety/PSM/regulatory compliance program that improved site safety. Achieved zero recordable injuries in 2010 and 2011.
Developed and updated site specific safety policies and procedures using JSA’s and other site documents.
Directed and supervised on-site safety for facilities including pulp and paper mills, refineries, saw mills and chip facilities in the Pacific Northwest.
Developed an ongoing training course for hazard waste operations and emergency response (HAZWOPER), confined space entrant/attendant/supervisor, hazard communication, PPE selection and chemical safety for over 200+ employees.
Developed and conducted chemical safety training courses for Longview Fibre pulp and paper mill employees specific to the needs of these new chemical specialists. Per 29 CFR 1910.120, 29 CFR 1910.146 and 29 CFR 1910.1200
Performed site audits, conducted safety meetings, new employee orientation and training
Supervised and documented accident/incident investigations.
Introduced standard operating procedures (SOP) and accident prevention programs that reduced the company’s lost time frequency rate.
State of WA, Department of Labor and Industries, 2004 – 2008
Lead Compliance Officer, Region 4
As lead compliance officer, I was responsible for the continual training of my fellow compliance officers in the areas of OSHA regulations including PSM, Confined Spaces, Excavation and Trenching, Fall Protection, Hazardous material identification and assisted them in becoming proficient with SDSs (Safety Data Sheets) per 1910.1200.
Instructed fellow compliance officers regarding the VPP program and the value of that program for the companies which chose to participate.
Inspected/audited businesses, construction sites, excavation and trenching, confined spaces, hazardous materials in the state of Washington, Region 4.
Documented hazards using photographs and written hazard description. Using this material a written inspection report was filed and used for any follow-up inspections.
Instructed and assisted companies in the examination of discrepancies found during the course of an inspection and review of company written policies. Established reasonable time frames to make corrections.
Assisted companies with their compliance requirements per federal, state and local regulations.
Investigated accidents and fatalities.
Investigated anonymous employee complaints; determined the validity of the complaint and assisted companies with any changes required to ensure employee workplace safety.
Cowlitz Clean Sweep (CCS), 2001 – 2004
Safety Professional
Taught site specific PSM programs which included respiratory protection, chemical hazards using site MSDS material, confined space attendant/entrant and supervisor, hazard awareness, specific mill warning horns/signals and evacuation procedures.
Directed and supervised on-site safety for facilities including pulp and paper mills, refineries, saw mills and chip facilities in the Pacific Northwest.
Developed an ongoing training course for hazard waste operations and emergency response (HAZWOPER), confined space entrant/attendant/supervisor, hazard communication, PPE selection and chemical safety for over 200+ employees prior to their employment at pulp & paper mills throughout the Pacific Northwest.
Developed and conducted a chemical safety course for Longview Fibre pulp and paper mill specific to the needs of incoming chemical handlers.
Performed site audits, conducted safety meetings, new employee orientation and training
Supervised and documented accident/incident investigations.
Western Geo-Engineers, Woodland, CA 1985 - 1996
Safety Manager/Environmental Field Technician
Wrote and implemented an Accident Prevention Program (APP). Conducted employee safety training that improved the company’s safety and productivity.
Developed a 40 hour Hazardous Waste Operations and Emergency Response course per 29 CFR 1910.120 and trained 500+ outside contractor employees.
Developed an annual 8 hour refresher course for employees and supervisory staff per 1910.120, 1910.146
Performed soil, water and air sampling in the field. Documentation and chain-of-custody protocol was followed per specific regulatory standards.
Performed site audits, conducted safety meetings, new employee orientation and training
Supervised and documented accident/incident investigations.
Certificates, Training and Education
Certified Safety Professional through the State of WA, Department of Labor & Industries
OSHA 30
Excavation, Trenching and Soil Mechanics – Georgia Tech, Atlanta GA
Industrial Hygiene
80 Hour HAZWOPER - UC Davis, CA
Investigator Core – Basic and Advanced
Investigator Training - Fatality
Electrical/lockout tagout
Electrical Standards - 40 hours training at Intel in Hillsboro, OR
Rigging Gear Inspector
PPE/Sanitation/Means of Egress
AGC - Introduction to Construction Processes and Construction Standards - 40 hours training
Scaffolding Competent Person - 40 hours training
First Aid/CPR
Excavation, Trenching and Soil Mechanics - 40 hours training, University of WA, Seattle
Accident Prevention Programs
Machine Safety - 40 hours training in Yakima, WA
Confined Space Instructor - Attendant/Entrant/Supervisor per 29 CFR 1910.146
License - Underground Storage Tank Decommissioning #21972
License - Soil Matrix Cleanup (soil and water sampling) #21973
Erosion Control Inspector – TN Dept of Environment, University of TN
Education
American River College; Biology/Chemistry
University of WA, Vancouver; Environmental Science