Engineer Process
Resume:
Beryl S. Santoso
Houston, TX 77094
Phone: 612-***-****
Email: *************@*****.***
SUMMARY
Process Engineer with experience in Front End Engineering Design (FEED) and Detailed Engineering in chemicals and oil & gas industry. Experienced in preparing instruments data sheets, PFDs, P&IDs, pressure relief valve (PSV) sizing, hydraulic calculations, line list, and HYSYS simulations among others. Engineer with a good communication skill, ability to work in a team, and adaptable to various working conditions.
EMPLOYMENT HISTORY
PROCESS ENGINEER – KBR, HOUSTON, TX Dec 2015 – Feb 2016
DuPont – El Dorado, Arkansas Project
The DuPont El Dorado project is an existing plant that produces FM-200 (waterless fire suppressant system).
oResponsible for doing complete calculation package for existing pressure safety valves, using updated data and information, including hydraulics calculations and updated relief valve datasheets. Make recommendations if existing relief valves and/or rupture disks are adequate or if they need to be replaced.
PROCESS ENGINEER – WORLEYPARSONS, HOUSTON, TX Jan 2011 – Nov 2015
Chevron – Rosebank FPSO Project
Rosebank project is a ship-shaped FPSO with a facility capacity of 100 kBPD oil, 200 kBPD produced water, 240 kBPD total liquids, 260 kBPD water injections, 105 MMSCFD gas processing including up to 65 MMSDFD gas export and 160 kBPD Seawater Treatment. Crude storage capacity is approximately 1.0 MMBBLS (FPSO Hull).
oResponsible for Seawater and Chemical Injection systems
oDeveloped PFDs, P&IDs, and SFDs
oDeveloped line list document using CAXpert
oDeveloped equipment and instrument data sheets
oPerformed pump calculations
oPerformed line sizing and hydraulics calculations
oReviewed vendor information
ExxonMobil – Sakhalin-1 Arkutun-Dagi Offshore Platform Topsides Project
The Arkutun-Dagi (A-D) Offshore Platform is located in Sakhalin Island, Russia. It consists of integrated topsides with drilling, production, utilities and living quarters with a minimum design temperature of -40 C. The project has a nominal production rate of 90,000 BPD of crude oil, 125,000 BPD of total fluids, and associated gas production including 70 million SCFD of gas lift.
Lead Process Engineer – Engineering Support
oWorked on updating and issuing process documents, such as System Descriptions, Offshore Topsides Relief and Blowdown Basis of Design, and Heat Tracing Requirement.
oWorked on creating new P&IDs for Temporary Living Quarters (TLQ)
oPrepared and review Key Document Change Notice (KDCN)
oClosed out any outstanding Technical Queries (TQ)
oCreated a controller set points document
oPerformed pump hydraulics calculations for start-up and commissioning purposes
oProvided full engineering support for the construction site in Okpo, Korea
Process Engineer – Detailed Engineering
oWorked on P&ID development for Issue for Construction (IFC) and Line List completion using Smartplant and CAXPerts
oWorked on vendor drawings review
oWorked on PSV Hydraulics and Calculations Review, updated PSV Calculation Packages and process data for instrument data sheet
Giprospetsgaz – Shtokman FPSO Feed Project
INTECSEA/WorleyParsons development of the floating production facility in the Russian sector of the Barents Sea, with a minimum design temperature of -40 C.
oWorked on Pressure Relief Valves calculations for Condensate system
o Developed Line List document and performed line sizing calculations
oAssisted in P&ID coordination, N2 blanketing, and Emergency Venting Air Requirement calculations for Chemical Injection System.
PROCESS ENGINEER - PROJECT ASSOCIATES, INC., HOUSTON, TX May 2007 – Aug 2009
Shell Terrapin Project
Terrapin test facility is located in Wyoming, and is constructed to provide field-scale testing of new production systems and processes that simulate deepwater subsea oil production.
oWorked with HYSYS process simulations and generated Heat & Material Balances
oReviewed PFD (Process Flow Diagram) and P&ID (Process & Instrumentation Diagram)
oProduced Heat/Cooling Duty Calculations, Equipment Sizing Report, Equipment Protection Summary, and Pump Pressure Relief Table
oInvolved in a HAZOP (Hazard and Operability) meeting as a scribe and ensured all recommendations have been implemented
Chevron Piceance Project
Piceance Early Production System (EPS) is installed in Piceance Field Development in Colorado, which will provide production facilities on four well pads with 22 wells each. The production fluids will be sent off pad for 3-phase separation to common facilities.
oProduced Piping Pressure Loss Calculations
oCompiled Vendor Data, Piping Drawings, Equipment Location Plans & Layouts
Expro Production System
Assigned to assist in designing production facilities for a client, Expro Production System, in Houston for 8 months
oWorked with HYSYS process simulation and generated Heat & Material Balances
oInvolved in generating PFD and P&ID
oGenerated Equipment Data Sheets
oProduced Piping and Separator Sizing Calculations, Piperack Weight Calculations, and Flare Radiation Calculations and Report
Expro International Group PLC, South East Asia Region
Out of country assignment in Batam, Indonesia for 9 months for Expro International Group PLC
oGenerated a complete set of equipment certifications package before the equipment was delivered to the client
oConducted calculations of MAWP for Pipeworks
oBuilt HYSYS simulations for oil and gas wells for well testing purposes
oAssisted in writing procedures/work instructions for all maintenance, repair or rework carried out on equipment to the highest possible standard and in line with statutory regulations
EDUCATION
Texas A&M University, College Station, TX
Bachelor of Science Degree in Chemical Engineering Dec 2006
Specialty Certificate in System Safety Engineering Dec 2006
Relevant Coursework:
Foundation of Engineering Plant Design
Fluid & Mass Operations Plant Economics
Heat Operations Process Safety Engineering
Thermodynamics Industrial Hygiene Engineering
Process Control & Instrumentation System Safety Engineering
Kinetics Industrial Safety Engineering
SPECIFIC TECHNICAL SKILLS/TRAININGS
Computer Software:
Microsoft Office
Aspen HYSYS
AutoCAD
CAXperts
Smartsketch
Flarenet
Flaresim (Flare Radiation Calculation)
Training & Skills:
Completed the training course in Process Modeling Using Aspen HYSYS (Oil & Gas Focus) from AspenTech
Completed training in Pressure Protection from Puffer Sweiven
Attended training for Flaresim software, a simulation that models thermal radiation generated by flare systems
Familiar with AutoCAD and Microsoft Office applications
Fluent in Indonesian
EXTRACURRICULAR ACTIVITIES
Active in social work, such as visiting elderly homes and orphanage
Participated in Texas A&M Big Event volunteer work
Volunteered in homeless shelters
Participated in Texas A&M Indonesian Student Organization and Indonesian Christian Fellowship activities in College Station
Contact this candidate