CURRICULAM VITAE

D.Pon Ganesh

MadaNadar Kudiruppu, Averaikulam (post),

Kavelkinuru (via), Tirunelveli (dist),

Tamil nadu -627133

Phone : +91-978*******, +91-984*******

Email : acwu5p@r.postjobfree.com

acwu5p@r.postjobfree.com

OBJECTIVE

I wish to find a suitable position where my Interest, 11+ years experience in Offshore, Onshore, FPSO & FSO Commissioning, Pre- Commissioning,maintenance and up-to-date knowledge on Industrial Automation Projects will be fully utilized for mutual growth.

EDUCATIONAL BACKGROUND

Passed Diploma Electronics & Communication Engineering at

(State Board of Technical Education, Tamil Nadu) in April 2000.

Passed HSC Concordia Hr. Sec. School, Vadakangulam in March 1997.

EMPLOYMENT HISTORY

PREVIOUS FIRM: 7

COMPANY : ROSETTIE MARINA SPA (INTECH)

GLAIND : MELLITHA OIL GAS BV (DP 4 OFFSHORE PLATEFORM) LIBYA

POSITION : INSTRUMENT TECHNICIAN

PERIOD : JANUARY 2016 to JULY 2016

FSO Replacement at DP 4 Offshore Bouri field Libya

Pre-commissioning, Testing and Commissioning of Control Valve ESD Valves,Transmitters and Pressure switches .

Termination of Instrument and Electrical Cable, Internal wiring for the DCS cable lying of the system cable & termination of primary & secondary cable to junction box.

Installation and commissioning of Big Signelator.

Pre-commissioning, Testing and Commissioning, Pre and Start-up and operation

Perform loop checking,Strock checking and loop setting to the client as per Engineer/Supervisor’s schedule.

Participates in acceptance tests of new and upgrade systems, identifies deficiencies and provides punch list.

Ensures safety of personnel and equipment through compliance with company’s Environmental Health and safety policies, procedures and standards.

Knowledge of hazardous area classification.

Preparation and making of Instrument Tubing ”, 3/8”, ” .

Preparation and Fabrication of cable Trays and Cable Tray Covers.

Pulling of HT,LT and Instrument cables.

Installation and Commissioning of Flow Meters, Control valves, Pressure Switches.

PREVIOUS FIRM: 6

COMPANY : V SHIPS India Pvt Ltd

GLAIND : SBM OFFSHORE (FPSO MONDO) ANGOLA

POSITION : INSTRUMENT TECHNICIAN

PERIOD : JUN 2014 to MARCH 2015

Responsible for Maintenance of all equipments like Air compressors packages, LT panels,Generator,Turbine, Water Treatment plants,etc.

Planning of Preventive maintenance system and updating of technology to increase porductivity.

To follow up the vendors assginment and feedback to the management.

Calibrates process control Instrumentation such as Pressure, Level, Flow, Temperature Transmitters, Controllers, Recorders, Current Pressure Transducers, etc (Rosemount Yokogawa, ABB, Endressc + Hauser and Vega)

Calibrates Turbine, Compressor and Motors control systems includes calibrating Temperature and Vibration monitoring systems.

Calibration and maintenance of H2S, CH4,CO, O2, UV,IR &HEAT detectors (Servmex, Simtronics).

Calibration in Portable Gas Detectors,Taxic clipes and multi Gas detectors (Crowcon).

Installation, alignment, calibration and maintenance of Pneumatic and electronic pressure, temperature, and flow recorders, proximity probes, proximitor.

Dismantling, Calibration and reinstalling of Vibration Probe Thermo couple in

Gas Turbine and Gas Compressor .

Installation, Maintenance, calibration & Troubleshooting of online analyzers (PH meters, Conductivity Meters, Oxygen Analyzer, Alkalinity, Total Organic Carbon and Infrared Analyzer) as well as Biotech Research analyzers

PREVIOUS FIRM: 5

COMPANY : DIETSMANN Maintaining Energy

GLAIND : UNITY FPF Greater Pioneer Operating Co (GPOC) SOUTH

SUDAN ( Upstream Facility)

POSITION : INSTRUMENT TECHNICIAN

PERIOD : MAY 2013 to APRIL 2014

Responsible for the Maintenance of the Instrument systems in FPF, a capacity of 60 thousands BPD of crude oil production plant and Water Re-injection plant in gummry south Sudan.

Responsible for Maintenance of all field Instruments and control strategy in upstream facility in pdoc–south sudan .

Supervising of sub-contractor Activities like construction and commissioning of control systems and filed instruments in up stream processing facilities like Separators,Gas boot, Tank forms, Compressors, Pumps, water treatment packages, Heat Exchangers, Heat Medium systems, Metering skids, Pipe Racks, Nitrogen skid, Firewater systems, Well Head Equipments.

Responsible for commissioning of control system of (DCS- Yokogawa Pro safe RS), PLC’s Like AB, Siemens.

Responsible for Fire and Gas, PAGA System instruments commissioning and maintenance.

Review of pre-commissioning and commissioning check list and procedures.

Dismantle, repair, Overhaul, assemble and testing different kinds of Control valves, Shutdown Valves (Fisher,Masoneilan, ABB, Flowserve, )

PREVIOUS FIRM: 4

COMPANY : ERAM Engineering

GLAIND : S-CHEM Saudi Chevron Phillips KINGDOM OF SAUDI ARABIA

POSITION : Instrument Technician

PERIOD : January 2013 to March 2013

Carries out the Repair .Overhaul and Calibration of process control equipment on site or in

Workshop includes systems .such as a Fire & Gas detection equipment, Turbine control systems, Wellhead hydraulic safety systems and ordinary control systems eg. Pressure, Level, Flow, Temperature And Control Valves. Etc

Turbine flow meters, orifice, Coriolis and Vortex flow measurements of various make like(Endress+Hauser, ABB, Honeywell, Yokogawa, Rosemount )

Responsible for the maintenance activities in Custody Metering skids, provers, Multi phase Flow meters (Agarcorp) and all kind of analyzers like O2, PH, Conductivity, Gas Analyzers, TDS analyzers, Heat Tracing Control panels,Open and closed Drain sump Heater control circuits Heat Medium control and burner control (Aura) equipments and condition monitoring systems.

Maintenance of Fire and Gas systems consists of Flame detectors, Gas detectors and fire alarm systems .

Working with SAP based EMMS (Equipment Maintenance Management Systems), AMS of Corner stone interface with HART Protocol base field instrumentations. and Spare part management systems to maintain the adequate Maintenance Activities like Work orders, Spares for field instruments and control systems Equipments,Equipment availability,MTBF and MTTR.

Carryout shutdown and major overhaul activities by carrying out shutdown preparation, data collection and condition monitoring duties as assigned by Senior Support Engineers

All above work is executed by adopting the Company HSE policies and create the awareness about the safety, HSE policies to the contractors and subordinates.

PREVIOUS FIRM 3

COMPANY : MANWEIR Wll MANNAI Corporation QSC

GLAIND : QATAR PETROLEUM,(PS-1,PS-2,PS-3 & PS-4,MAERSK OIL &

QPD OFFSHORE’S) QATAR GAS,RAS GAS,ORYX GTL QATAR

POSITION : Instrument Technician

PERIOD : January 2007 to October 2012

Responsible for complete maintenance of field instruments in surge vessel, Electrostatic dehytrators Separators, Tank forms, Air Compressors, Pumps, water treatment packages, Heat Exchangers, Heat Medium systems, Electro dehytrators,Metering skids, Nitrogen skid, Firewater systems.

Maintenance of all kind of field instruments and Siemens, AB, Fanuc PLC systems used in sugar production plants.

Maintenance of Instrumentation systems involved in Effluent treatment plants and Alcohol Distillation Plant (SCADA) and Bio Gas plant.

Maintenance of AC and DC motors (up-to 1000 hp) condition monitoring systems, servomotors, Stepper motors, and its control circuits.

Involved in daily preventive, breakdown maintenance of above mentioned plants systems and instruments.

Hands on experience on all types of process field instruments (pressure, flow, level and temperature) elements, transmitters, valves, MOV’s, controllers and communicators) including smart valve positioner.

Hands-on experience on HART 375 &475 EMERSON ROSEMOUNT, YOKOGAWA.

Hands-on experience on Siemens PLC like alarms, trips disabling, enabling, bypassing, trend configuration, and systems cards healthiness checking, redundancy checking and trouble shooting assistance to Engineers.

PREVIOUS FIRM 2

COMPANY : HAL Offshore Ltd Mumbai

GLAIND : ONGC MUMBAI OFFSHORE PLATFORMS

POSITION : Instrument Technician

PERIOD : March 2005 to December 2006

Carries out the Repair .Overhaul and Calibration of process control equipment on site or in Workshop includes systems .such as a Fire & Gas detection equipment, Turbine control systems,Wellhead hydraulic safety systems and ordinary control systems eg. Pressure, Level, Flow, Temperature And Control Valves. Etc .

PREVIOUS FIRM 1

COMPANY : Thekkans Nakco Mumbai

GLAIND : ONGC MUMBAI OFFSHORE PLATFORMS

POSITION : Instrument Technician

PERIOD : March 2004 to Feb 2005

Calibration, installation, loop-checking, commissioning and troubleshooting of pressure, flow, level, temperature transmitters, Pressure switches, level switches, levetrols, High Temp Thermocouple, Proximity switches, Temperature Switches, Flow Switches, ultrasonic level and flow transmitters, vortex flow transmitters, mass flow.

COURSE COMPLETED:

S.N

COURSE TIGHTEL

VALID UP TO

1

Safety Training In Ex-EQUIPMENTS (COMPEX)

31-July -2019

2

BOSIET OPITO Approved (Vantage no 1511531)

19-Jan-2020

3

HUET with EBS (5095) OPITO Approved (Vantage no 1511531)

27-Jun-2018

4

H2S OPITO Approved (Vantage no 1511531)

20-Jan-2018

5

Oil Tanker Familiarization (OTFC)

02-Aug-2019

6

Security Training For Seafarers with Designated Security Duties (STSDSD)

UNLIMITED

7

Personal Safety And Social Responsibilities (PSSR-STCW 2010)

UNLIMITED

8

Fire Prevention And Fire Fighting (FPFF-STCW 2010)

22-Julay-2019

9

Personal Survival Techniques (PST-STCW 2010)

22-Julay-2019

10

Elementary First Aid (EFA-STCW 2010)

19-Julay-2019

11

Basic Training for Oil, Chemical & LG Gas Tanker Cargo Operation

UNLIMITED

12

Yellow Fever Vaccination

20-Aug-2023

PASSPORT DETAIL :

Passport No

Date of Issue

Date of Expiry

Place of Issue

Z 2655907

05-09-2013

04-09-2023

Madurai

SEAMAN BOOK NO

Date of Issue

Date of Expiry

TYPE OF SEAMAN BOOK

SRB280665-00

17-09-2014

16-09-2024

BAHAMAS CDC

STRENGTH & ADDITIONAL SKILLS

Knowledge of ASEA BROWN BOWERI (ABB) DCS System

Knowledge of HIMA ESD System

Ensures compliance with PPM requirements and prepares records of validation /calibration data and details of maintenance activities carried out.

Highlight & report any anomalies and diagnose & repair of faults & breakdowns.

Participates in Regular Toolbox meeting with colleagues.

Reports all near misses, incidents and Accidents during Operation.

PERSONEL DETAILS

Fathers Name : P.DURAIPALAM

Date of Birth : 05/06/1979

Marital Status : Married

Nationality : Indian

Languages Known : English, Hindi, Tamil and Malayalam

Computer Knowledge : Ms-Office, Internet knowledge

PLACE: Tamilnadu yours faithfully,

DATE: (D.Pon Ganesh)

Contact this candidate