M. VISHNU SHANKAR

Contact : ***-978-***-****,***-**4-42072402(India)

E-mail: acwsjp@r.postjobfree.com

Mechanical Engineer with experience in Quality Control & NDT Looking for a suitable opening across the industry PPRROOFFIILLEE

A dedicated, resourceful and innovative professional with Degree in Mechanical Engineering ; Experienced in Radiography Interpretation & Advanced Non-destructive Testing and inspection, with an experience of more than 5 years.

Supervised integrity inspection at Yibal Y3DC project, Exterann, Daleel petroleum, BP Oman. Assisted in creating asset integrity of the plant process pipes and equipment.

Witnessed and monitored NDT activities for a vessel inspection. Created Inspection plan and supervised NDT technician crew.

Lead teams of NDT and visual inspectors in various projects to accomplish integrity analysis of the job. Integrity analysis was performed for companies like BP, Daleel, Exterann and PDO.

Performed Visual and NDT inspections for pipelines and hydrocarbon storage tanks for PDO, BP, SHELL, Enerflex, Omifco, ORPIC, STOMO & Daleel petroleum.

PDO approved AUT corrosion mapping inspector and permit holder. Handled and worked with most advanced NDT equipments as FORCE Technologies p-scan & Olympus MX2.

Drafted isometrics for pipelines for process and fire water lines for PDO, BP, SHELL and Oman oil.

Performed and assisted Advanced NDT techniques as PAUT, TOFD, IRIS, ECT, and MFL & AET on pipelines, vessels and storage tanks.

Good Knowledge and experience in preparing PIDs, Piping Layout, Isometrics.

Effective resource planning/ optimization, focusing on waste reduction, enhancing productivity and profitability. Ability to use sound judgment, decision-making skills & effectively perform in a self-directed environment.

AACCAADDEEMMIIAA

B.E. (MECHANICAL), 2009

Sathyabama University, Chennai, Tamil Nadu, INDIA

HIGHER SECONDARY, 2004

K.V. Sala MAT, HSS Virudhunagar, Tamil Nadu, INDIA Technical Qualification:

Process piping engineering and design as per ASME B31.3 from Ipebs,Hyderabad, Jan2013

CSWIP 3.1

BHEL (Welding & Inspection), June 2010

PDO approved

LEVEL-II in:

Ultrasonic Testing Radiography Testing Magnetic Particle Testing Liquid Penetrant Testing

Level 2 Operator for Silverwing RMS 2 – 450P.

IINNDDUUSSTTRRIIAALL TTRRAAIINNIINNGG

Organization: IPEBS, Hyderabad

Training for: Process piping Engineering and design as per ASME B31.3 Duration: 45 days – Jan 2013

Organization: BHEL

Training for: WRI Welding & Inspection Training

Duration: 1 month – 2009

Organization: STS (safety),Oman

Training for: American Heart Association – Lifesaver (first aider, CPR, AED) Duration:

2014

Organization: STS (safety),Oman

Training for: Authorised Gas Tester – PDO

Duration: 2014

RREESSPPOONNSSIIBBIILLTTYY

Perform welding inspection at shop and site.

Reviewing piping isometrics and NDT activities.

Assist QA/QC engineer to prepare and conduct WQT, WPS, ITP and NDT plans and procedures.

Carry out the full dimensional inspection as per the approved drawing/ project specification.

To supervise and participate in NDT of piping and equipment. Review of NDT reports and radiography film interpretation. Verify all NDT results

Preparation of test packs and witness Hydrotest and review charts and reports.

Ensure all welding, heat treatment, and NDT are in compliance with relevant codes and specifications.

Prepare weekly and project progress reports.

Cordiant with TPI/Client representative to get job done.

Layout Study & Finalization

Finalization of Pipe Routing

Checking & Issue of Isometrics (P&ID Check, Line Routing, Support Check, Special requirement check etc.)

Preparation & Checking of Nozzle Orientation

Preparation of TQs/Comments on the Vendor Documents (Equipment Drawing, Spring Support Drawing, Special Valve Drawing etc.)

Preparation of Comments on Civil Structural Drawing, P&IDs, Equipment Engineering Drawings etc.

Selection of Pipe Supports, Special Support & Spring Hangers

Preparation of P&ID MTO & Requisitions

Continuous use of Material Specifications for finalizing Line Routing & Layout

Interface/co-ordination with Stress Group for Critical Lines/Crictical Stress Systems PPRROOFFEESSSSIIOONNAALL EEXXPPEERRIIEENNCCEE

APPLUS VELOSI

Jan - 2011 to April 2016

QC / NDT Inspector

Supervised visual inspections and administered NDT activities of equipment and piping carried out by NDT technicians.

Supervised and lead integrity activities at Yibal Y3DC project and Saihrawl SRDC2 project. Audited and monitored all ndt activities regarding the integrity analysis. Integrity analysis includes baseline survey and Risk based inspections.

Coordinated with other corresponding departments to relay essential reports regarding quality control and assurance. Monitored and ensured all NDT equipments are calibrated and in good condition to meet minimum requirments.

Lead the Integrity team for analysis of flood damaged section of the interstation transportation oil pipelines. Performed visual inspections on flood damaged oil lines for DALEEL Petroleum, Ibri. Prepared NDT plan for inspection on damaged sections of the pipeline. Monitored and supervised NDT activities of the pipeline. Created a full analysis of the pipeline damage and supervised NDT crew to perform NDT inspections on the line.

Automated corrosion mapping carried out on Turbine condenser equipments at OMIFCO, Sur.

Performed Automated Corrosion Mapping on Pipelines and Equipments using FORCE Technology’s P-scan for PDO at Mina al fahal, Lekhwair, Qarn alam and Fahud. Analysed results and compared with previous results.

Performed Automated Corrosion Mapping on Pipelines and Equipments using Silverwing RMS2-450P scanner for PDO at several locations.

Permits Applied and Held for performing Various NDT activities at BP Oman, EWT (Extended Well Test) Khazzan/Makarem.

Performed Visual Inspections, PID & isometric as-built checks and created line list for OSBL and ISBL of BP Oman, EWT (Extended Well Test) Khazzan/Makarem according to the Risk Based Inspection Plans. Prepared Scanning plans and performed Thickness survey on Equipments like Inlet Separators and Knock out Drums.

Corrosion mapping of critical drain lines and dead legs using HYDROFORM and Automated P-scanner at BP Oman, EWT (Extended Well Test) Khazzan/Makarem according to the Risk Based Inspection Plans.

Assisted in TOFD (Time of Flight Diffraction) Inspection of In-service Equipments for ORPIC Sohar. Performed and Assisted Phased Array Inspection on Equipments and Pipelines at ORPIC Sohar using Olympus OmniScan MX2.

Performed and Assisted tube Inspections for Heat Exchangers using IRIS and ECT Inspection Methods at ORPIC Sohar using Olympus MultiScan MS5800.

Assisted in performing Accoustic Emmision Testing by Approved AET technician on fuel oil storage tanks for STOMO, Rusayl Power Station. Analysed the Storage tank Bottom plates and annular plates results. Prepared reports for the inspection as per client requirement.

Performed Visual Inspections on process pipelines and hydrocarbon transport lines as per API 570 at SHELL Oman, MAF. External visual inspection carried out on in-service pipings, valves, flanges and lines crossing bund walls. Suggested for pipe support locations, recoating and surface preparation for further NDT inspections. Reviewed LRUT, UT, and MT reports.

Performed Visual inspections on Fuel oil pipelines and storage tank at Sultan Qaboos Port for SHELL Oman. Drafted isometrics for the pipeline and suggested contractors to perform repairs at critical locations.

Assisted Senior Technician in MFL Floor mapping of Above Ground Storage Tanks at SHELL Oman, MAF using Silver Wing FloormapVS2i. Conducted Vacuum Box testing inspection according to API 653 at Shell Oman.

Drafted isometrics of Hydrocarbon Pipings at Shell Oman, MAF. Performed Thickness Survey on the drafted Hydrocarbon lines. Prepared a Risk assessment sheet for all the lines at Shell MAF.

Assisted API approved Inspector in Above Ground Hydrocarbon Storage Tank for Verticality, Settlement, Thickness and Visual Surveys according to API 653 Shell Oman, MAF. Equipment used during Inspection was by Laser guided Leveling Device.

Assisted in ECT Tube Inspection of Heat Exchanger at OLNG, Sur using Olympus MultiScan MS5800.

Performed and assisted in Tank Verticality and settlement surveys of Above Ground Hydrocarbon and Fire water Storage Tanks. Operated Total station and Autolevel. Location of Inspection at OLNG, Sur.

Drafted Isometrics and Visually Inspected fire water Lines at Oman Oil, MAF. Thickness survey of the pipe was carried out on the Fire Water Lines.

Performed Weld Inspection using Conventional Ultrasonic testing on Tubular Heads and Raw material Inspection on Bolts at CAMERON, Rusayl.

Vishwabalaji Engineering

Jul. 2010 – Dec. 2010

QC (Mechanical & NDT)

Reviewed drawings, contract scope of work, client specifications, procedures etc. Also conducted Review of inspection and test plan (ITP) of mechanical.

Responsible to ensure that all inspections and tests are carried out as indicated on the appropriate ITP.

Performed visual inspection on steel in accordance with the provisions at AWS QC1.

Assisted in preparation of Welding Procedure Qualification Record (PQR), Welder Qualification Record and Welding Procedure Specifications.

Accountable to conduct tests to ensure quality or detect defects using NDT methods of inspection.

Even conducted Coating inspection on painted products.

Worked on projects of clients like L&T and Fives India. CMS Inspection Services

Feb. 2008 – Oct. 2009

NDT Technician

Carried out Ultrasonic thickness Measurement of pipe lines and equipments, checked corrosion on pressure vessels and lamination check of Raw Materials.

Carried out Ultrasonic Inspection in various weld Joints using 700, 600 & 450 Angle Probes.

Handling raw material thickness measurements using normal probe and TR probe was checked and satisfied the Customers.

Handling Magnetic particle inspection on Butt weld, Fillet Weld and inspection on Machines & components, using Dry method and Fluorescent method.

Carried out Penetrant inspection on weld Joints

Radiography interpretation to customers’ satisfaction. Survey Equipments Handled:

Sokkia Total Station

Auto Level

NDT Equipments Handled:

FORCE Technology’s P-scan 4-lite

SIVERWING RMS2 – 450P

Olympus OmniScan MX2

Olympus MultiScan MS5800

Modsonic Einstein TFT,DGS

Krautkramer USM-35,Phaser-EX

Olympus MX 2

Computer Skills:

Windows, MS-Office (Microsoft Word, Excel, PowerPoint) & internet applications Date of Birth: 18th Oct. 1987

Languages: Tamil, English, Hindi

Passport No.: M3939822

References: Available on request.

Contact this candidate