Hi

I would interest to applying for the post of "Sr. Piping Design engineer

16+ years Excellent experience in the various phases of Design & Detailed Layout Engineering of Oil & gas FPSO Topsides, Offshore Topsides wellhead & Living Quarters Platform,

LNG (Liquid Natural Gas), Petrochemical& Refineries Projects with reputed EPC Engineering Consultancy and currently working with CB&I., Ulsan office, As a first step in exploring the possibilities of employment through your service, I have attached my curriculum vitae for your kind perusal. I am glad to follow up through either a phone call or email.

I Hope ensure you that I will be able to meet your expectations.

Expedite your favorable reply.

Thanks and Regards,

R.Manikandan,

Block-197, 05-705

Rivervale Drive,

Singapore

Nationality Singaporean

Hand phone no.+658*******/ +658*******/+919*********

Email : acwqbn@r.postjobfree.com

acwqbn@r.postjobfree.com

acwqbn@r.postjobfree.com

Sr. Piping Design Engineer

MANIKANDAN RAJENDRAN : acwqbn@r.postjobfree.com

:acwqbn@r.postjobfree.com

È:+65-85119475/+65-83801729/

+919*********

Nationality : Singaporean

PROFESSIONAL SUMMARY

16+ years Excellent Experience in Design & Detail Engineering and 3D Modeling of OIL&GAS FPSO Topside, Offshore Topside Well Head, Process & LQ Platforms, LNG Project (Liquid Natural Gas) Petrochemical & Refinery Process Plants for Overseas Global projects. Excellent Experience in AVEVA Plant Design Management system(PDMS) 12.0SP6.47, Intergraph Smart plant 3D and Plant Design System (PDS) 3D Software. 7.3. To have a Challenging Carrier in Piping Design with Multi Tasking Capabilities.

AREAS OF PARTICULAR EXPERTISES

Design & Detail Layout Engineering of Equipment & Piping layouts using through 3D Modelling in PDMS and Smartplant 3D.

Develop the Plot Plan & Equipment and Piping Layouts Based on the Process(PFD & P&ID) as per

Client Requirements.

Yellow Line Flow Check with PDMS Module against with Latest P&ID`s and if any deviation found discussed with Process dept. mark up to the P&ID`s accordingly.

Develop the Nozzle Orientation & vessel clips for the equipments and provide comments to Vendor drawings to suit Layout.

Vendor Documents shall Reviewed such as process Equipment, Shutdown, Control &blow down valve etc.

Review the Material Handling Layout to access the heavy weight valves and Equipments’.

Coordinate between Piping/Pipe support team and other discipline to resolve the technical queries.

Preparation of Piping Weight report for the Topside platform.

Knowledge of Norsok Standard & ASME Standard.

Prepare the Stress Isometric based on Stress Analysis for the Critical lines CAESER II.

Model the Pipe Supports Using MDS support Application as per the Pipe Support Standard based on the Stress Requirements.

Customization and Generate Reports for the Piping MTO, weight report, Bolt MTO, MDS inline Supports.

Extracting Equipment GAD`s, Piping GAD`s & MDS support drawings from the PDMS using Draft Module.

Checking and giving comments to Inter disciplinary Comments (IDC) to other Discipline.

Working with ISO Production Team to Produce the IFC Isometric through ISO Cycle.

Clash review & Interference check with PDMS Module using Macros & AVEVA Clash Manager &SP3D.

Customizing and setup the Witch Hanger software and model the Spring as per stress requirement.

New Project creation and Set up, Retrieval - Database Back tracking & Merging Database.

PDMS Administration involving creating Teams, Users, DBs & MDB. Access control rights and Roles management, Clash Manager Administration.

MDS Administration and customization as required for related project.

ABA ADP Automatic Drawing Production customization as project requirements.

Build of 3D Catalogue Piping items as per the PMS using Paragon Module and Creating new UDA`s (User Define Attributes) as Project control requirement using LEXICON Module.

Writing Piping Spec & Equipment Nozzle of 3D CATS &SPEC through PDMS SPECON Module.

PROFESSIONAL QUALIFICATION

B.Tech. Mechanical Engineering from Karnataka State University Year 2014.

Diploma in Mechanical Engineering (D.M.E.), from Rajasthan Vidyapeeth University Year 2010.

National council of Vocational Training (N.C.V.T.)

Draughtsman ship in Mechanical from Government Industrial Training Institute year 2000

National Apprentice Certificate (N.A.C)

HANDLED Major EPC PROJECTS with Clients:

1. Aasta Hansteen EPC Offshore Topside FPSO Spar Platform North Sea Project (Statoil Ltd ).

2. Mariner Topsides Offshore EPC Project North Sea project.

from Statoil (UK) Limited.

3. EKOL 24/L Accommodation Offshore Platform-Topside and Bridges North Sea

from ConocoPhillips Norway Region.

4. GORGON Project Barrow Island LNG PLANT from Chevron Australia Pty Ltd.,

5. Quad 204 FPSO Topside Offshore Project from BP.,

6. Kipper Turrum Phase 2 Gas Project Topside Offshore from ESSO Australia Pty Ltd.,

7. Rajasthan Northern Area Development Project from CAIRN Energy India Pvt. ltd.,

8. FRADE FPSO Espirito Santo Tamba BV-BC20 Field from SBM Offshore INC.

9. Naphtha Hydrotreater CCR - Reformer Jebel Ali, UAE from ENOC Processing Company

10. Eastern Petrochemical Co. (SHARQ) Saudi Arabia from SHARQ U&O 3rd Expansion Project

11. Refuel Ramp Fuel Oil Piping System from Us Army Based in Aldhafra – Abudhabi

Excellent Experience of PLANT DESIGN MANAGEMENT SYSTEM (PDMS V12.0)

Intergraph Smart plant 3D 2014.

3D Design Piping and Equipment Modules, Witch Hanger Software (Springs)

PDS –PLANT DESING SYSTEM Intergraph 7.3 & Auto CAD 2006, Micro station V8.

Knowledge of CAESAR II 5.2

Multiple Design Support MDS. Pelicon Forge Support modeler.

PDMS-ADMIN Module /PDMS Isodraft/Draft Module, PDMS Paragon,

Specon Module & PDMS LEXICON, Review Reality 12.1, Navis works, Smart Plant review.

Work Experience

Mar.2016–till date

Employer : CB&I Ulsan pte ltd.,(South Korea)

Client : Statoil (UK) Limited.,

Project: : Aasta Hansteen EPC Offshore Topsides

Position : Sr.Piping Design Engineer

Responsibility : Construction Site support with HHI Ulsan site office and Working close with HHI Piping Team to resolve Site quires as per construction priority in order to construct the Topside. Providing best solution for the site quires.

Aug 2014– Mar.2016

Employer : CB&I Singapore pte ltd.,

Client : Statoil (UK) Limited.,

Project: : Aasta Hansteen EPC Offshore Topsides

FPSO Spar Platform North Sea Project.

Description : The project is for Statoil and is consists of a self

contained FPSO SPAR positioned at the Aasta Hansteen

field in the North sea.

Position : Sr.Piping Design Engineer

Responsibility: Conceptualization Design & Detail Layout Engineering of 3D Modelling of the above Topside FPSO Spar Platform. Responsible for the Equipment’s and Piping Layout for Process area. Update the P&ID Mark up as per latest model, and coordinate with Process if any necessary changes. Review the P&ID against with Model to ensure the accessible and maintenance of the Equipment’s and piping Inline valves and Review the Material Handling for the heavy weight items like valve &Equipment etc., using through Review Reality 12.1. and Working with Pipe Support Team to build the Pipe supports to meet Stress analysis requirements and selection of Piping Inline supports based on allowable loads given by Pipe Support standard using MDS (Multi Discipline Supports). Prepare the Trunnion, Welded shoe & Frame Calculation to ensure the allowable loads .Refer the Norsok Standard as project projects requirement. Generate the MDS Inline support MTO, Topside Weight Report. Support with HHI Site queries and resolve the Issues.

July 2013– Aug 2014

Employer : CB&I Singapore pte ltd.,

Client : Statoil (UK) Limited.,

Project : Mariner EPC Offshore Topsides Platform- North sea.

Description : Stabilized Crude Oil, exported via sub-sea line to

Floating Storage Unit (FSU)

Position : Sr. PDMS Piping Design Engineer

Employer : CB&I Singapore pte ltd.,

Responsibility: Conceptualization Design & Detail layout Engineering of 3D Modelling of the above Topside Offshore Platform, Responsible for the Equipment’s and Piping Layout for Process area. Update the P&ID Mark up as per latest model, and coordinate with Process if any necessary changes. Review the P&ID against with Model to ensure the accessible and maintenance of the Equipment’s and piping Inline valves and the Material Handling of the heavy weight items using through Aveva Review Reality 12.1. Monitor the PDMS model Progress every week and update the status to the Project Management. Working with Pipe support Team to build the Pipe supports to meet Stress analysis requirements and selection of Piping Inline supports based on allowable loads given by Pipe Support standard using MDS(Multi Discipline Supports). Refer the Norsok Standard as project requirement. Generate the MDS Inline support MTO, Topside Weight Report, Piping component MTO and overall progress report from PDMS to get the project progress measurement within the Piping Discipline and submit to Projects. Check and troubleshoot errors of database and PDMS/MDS 3D Model.

November 2011 – July 2013

Employer : SMOE (Sembcorp Collaboration) Singapore.

Client : ConocoPhillips Norway Region.,

Project: : EKOL 24/L Accommodation Offshore Platform-

Topside and Bridges North Sea Project.

Description : One of the world's heaviest accommodation topside

Accommodation Topside at North Sea Sector.

Position : Sr. Piping Designer PDMS

Responsibility : Conceptualization Design & Detail Layout Engineering of 3D Modelling of the above Topside Offshore Platform, Responsible for the Equipments and Piping Layout & Pipe Supports for the UDM (Utility Deck moule) Level-1, 2 &3, Living Quarters - LQ1, LQ2, LQ3, LQ4. Coordinate with Construction Team to resolve the site issue like clash with other discipline. Review the P&ID against with Model to ensure the maintenance and access of the Equipment’s and piping Inline valves to provide best Layout . Modeling of Pipe Supports to meet Stress calculation & Stress ISOS requirements and selection of Piping Inline supports based on Piping support Standard using MDS (Multi Discipline Supports). Refer the Norsok Standard as project requirement. Generate the MDS Inline support MTO, Topside Weight Report, Piping component MTO & Bolt MTO as required.

June 2010 – November 2011

Employer : KBR Singapore.

Client : BP

Project: : QUAD 204 FPSO Topside offshore.,

Position : Sr. PDMS Piping Designer

Period : Dec.2010 to Nov 2011

Responsibility : Conceptualization Design & Detail Layout Engineering of 3D Modelling of Piping Layout for the Separation module at Port side, Pipe routing modelling and checking Pipe routing, valves accessibility for the above area to meeting the P&ID requirements using PDMS & considered Pipe supports as well, Update the P&ID Mark up as per latest model, and coordinate with Process if necessary changes. Modeling of Pipe Supports to meet Stress calculation & Stress ISOS, based on Piping support Standard using MDS(Multi Discipline Supports).

Employer : KBR Singapore.

Client : Chevron Australia pty Ltd.,

Project : Gorgon Project Barrow Island LNG Plant

Period : June 2010 to Dec 2010

Description : The Gorgon Project will develop the Greater Gorgon

Area gas fields, located at Barrow Island Australia.

Position : Sr. PDMS Piping Designer

Responsibility: Conceptualization Design & Detail Layout Engineering of 3D Modelling of Equipments and Piping Layout for the TAAA & RBD Unit and connecting Pipe Racks, Pipe routings are done the above area to meeting the P&ID requirements using PDMS & considered Pipe supports as well, Update the P&ID Mark up as per latest model, and coordinate with Process if necessary changes. Modeling of Pipe Supports to meet Stress calculation & Stress ISOS, based on Piping support Standard using MDS(Multi Discipline Supports) and Model the Springs using Witch Hanger Software. Working with IFC Isometric Production Team to produce the Piping Isometric and MDS Support Drawings. Generate MDS draft drawing and issue Service Support Details. Updating and remodeling of MDS support if required. Assist in the administration of isometric issuing. Tracking of isometrics and Supports issued. Clash checking using Clash Manager.

July 2008 – May2010

Employer : McDermott Asia Pacific Pty. Ltd. Singapore

Client : ESSO Australia pty Ltd.,

Project : Kipper Turrum Phase 2 Gas Project Topside Offshore

Position : Sr. PDMS Piping Designer

Responsibility: Conceptualization Design & Detail Engineering 3D modelling of Equipments and Piping Layout for 6 Well head Platform, OIL&GAS Production &Test Manifold, Consider the Future Well head piping, Flow lines from X-Mas Tree, Gas Re- Injection Manifold, Crane Pedestal Diesel tank, Instrument/Service Air Receiver. Pipe routings are done the above area to meeting the P&ID requirements using PDMS and Modelling the MDS Pipe Supports as per Stress Calculation with Piping Support Standard. Equipments are updated as per the Data sheets & Latest Vendor Drawings as well as, review the Inter discipline comments (IDC). Prepare the Material Handling Layout where required. Generate the Nozzle orientation drawings, comments are update into vendor drawing to suit the Piping Layout requirements. Generate the Various Reports as per Project Requirements. Working with IFC Isometric Production Team to produce the Piping Isometric and MDS Supports.

From Nov 2007 to July 2008

Employer : Aarvi Encon Pvt. Ltd.,

Deputation : L&T Engineering Services ltd., Faridabad, India

Project : Rajasthan Northern Area Development Project. Client : Cairn Energy India Pvt. Ltd.,

Consultant : Mustang Engg. Houston U.S.A.

Position : Sr. PDMS Piping Designer

Responsibilities :

Conceptualization and 3D Modelling of Equipments and Piping for Export Oil storage tanks, Gas Processing area, Flare/Diesel Storage/Utility area. Pipe routings are done for the above area to meeting the P&ID requirements using PDMS. Raising the query to other Discipline with relative the Piping requirements. Maintain the 3D modelling progress list of Equipments and Piping Line list. Updating the Equipments as per the data sheets and Latest Vendor Drawings & Inter discipline comments (IDC), Civil Input Requirement Such as Pipe rack, Access Platform, Cross over bridge, Staircase, Foundation of the Equipments.

Responsibilities : Selection of Supports according to the stress load and modeled physical supports as per the Supports standard. Wherever trimmer beams are required to place the Pipe Supports those Inputs are give to Structural Discipline. Prepare the Material Handling Layout. Prepare the Nozzle orientation drawing issued to vendor IDC, Issuing the Iso`s to Stress Analysis Calculation, Preliminary MTO, and AFC cycle, attend the Client Model Review tags. Generate the Report for various outputs (e.g. Piping MTO, Insulation schedule, Valve list, Bolt report, Weld report, Weight etc) Company/client standard.

Jan. 2007 to Nov.2007

Employer : Aarvi Encon Pvt. Ltd.,

Deputation : Sidvin Core-Tech (I) Pvt. Ltd., Bangalore, India

Position : PDMS Piping Designer

Client : SBM Offshore INC.

Project : FRADE FPSO Espirito Santo Tamba BV-BC20 Field.

Responsibilities : Conceptualization and 3D Modelling of Equipments

and Piping for the Module-01 Test/Production Separation (Lower/Upper Level) System includes Crude Pre-heater, Production Separator, First Stage Hydro cyclone, Crude Exchanger, Second stage Separator, Crude oil Pump. Pipe routings are done for Above Equipments with meeting P&ID requirements using PDMS Module, and considering ARN changes. While pipe routing to consider group Pipe routing, maintain BOP, Group Pipe Support feasibility, Maintenance for the Equipments and valves such as Shutdown Valve, Control valve and Material Handling. Prepare the Material Handling Layout. Raising the query to other Discipline with relative the Piping requirement. Structure Input Requirement Such as Pipe rack, Access Platform, Staircase, Foundation of the Equipments & additional steel Members where required to placing the supports. Prepare the Nozzle orientation drawing issued to vendor IDC, Placing the Piping Support as per Support Standard using MDS Module. Generate the 2D Equipment and Piping Layout from the DRAFT Module.

December 2005 to Jan 2007

Employer : Aarvi Encon Pvt. Ltd.,

Deputation : Foster Wheeler India Pvt. Ltd., Chennai.

Position : Piping Designer

Client : ENOC Processing Company L.L.C. Jebel Ali, U.A.E

Project : Naphtha Hydrotreater CCR - Reformer Jebel Ali, UAE

Responsibilities : Conceptualization and 3D Modelling of Equipment’s and Piping for the Condensate Distillation unit area (Plant 12)System includes Naphtha Coalescer Pre-filter, Naphtha Coalescer, CDU Flare K.O. Drum and Flare K.O. Drum pump. Pipe routings are done for Above Equipment’s with meeting P&ID requirements, and considering P&ID changes. Raising the query to other Discipline with relative the Piping requirement. Civil Input Requirement Such as Pipe rack, Access Platform, Staircase, Foundation of the Equipments & additional steel Members where required to placing the supports. Prepare the Nozzle orientation drawing issued to vendor IDC, Inter discipline comments (IDC).

Client : SHARQ U&O 3rd Expansion Project

Project : Eastern Petrochemical Co. (SHARQ) Saudi Arabia

Responsibilities : Conceptualization and 3D Modeling of Equipments and Piping for Propylene Bog Compressor (Propylene Bog Internal KO Drum, Vent Gas Cooler, Propylene Bog Discharge Drum & Propylene Bog Vent Gas Knock out Drum, Mixed C4`s Tank, C4s Product Pump, Mixed C4 Storage Chiller & Nitrogen Breathing Tank. Pipe routings are done for above areas to meeting the P&ID Requirement. Updating the pipe routings as per Stress analysis routing. Prepare the Nozzle orientation drawing issued to vendor IDC, Physical Supports are modeled as per Support

Standard. Updated the Client Model Review tags.

Jan. 2004 to Dec. 2005

Employer : Al Mazouri Group of Engg. Co. L.L.C. U.A.E.

Position : PIPING DESIGNER

Client : Us Army Based in Aldhafra - Abudhabi

Project : Refuel Ramp Fuel Oil Piping System

Responsibilities

Conceptualization and 3D Modeling of Equipments and Piping system in PDMS tool. Preparation of Equipment layout, Piping Layout & Nozzle Orientation drawing. Extraction of Piping GAD`s using Draft module. Civil Input Requirement Such as Pipe rack, access Platform, Foundation of the Equipment. Preparation of Supports for relative Piping. Updating of Equipment Vendor Drawing Comments & Modeling the supports as per Support Standard. Inter discipline comments. Updating the Interference clash checking report.

April 2002 to Jan. 2004

Employer : Pace Engineering services.,

Deputation : Tamilnadu Petroproducts Ltd. Chennai, India

Position : PIPING DESIGN Draughtsman

Responsibilities

Design of Piping and Equipment Layout and Checking of Isometric and extracting Piping GAD`s Involved in Design of Revamp, Expansion and shutdown projects. Updating of Equipment Vendor Drawing Comments & Inter discipline comments. Making the detail Engineering Drawings as per process requirement. Checking existing drawings as per site conditions, Plant updating (As built) P&I.D's & Isometric, Piping & Equipment Layouts.

April 2001 to April 2002

Employer : Madras Fertilizer’s Ltd.,

Position : Piping Draughtsman Apprentice Training

Responsibilities

Design of Piping and Equipment Layout and updation

Of Piping Layout & Isometric. Extracting Piping GAD`s. Design the Revamp projects. Plant Operation Requirements detail drawings. To visit at site and make modification and Proposed Piping Layout as per Process requirement and making As built drawings for existing Plant.

August 2000 to April 2001

Employer : Pace Engineering services.,

Deputation : Tamilnadu Petroproducts Ltd. Chennai, India

Position : Piping Draughtsman

Responsibilities

Preparation of Equipment Layout and Piping layout.

extracting Piping GAD`s and Isometric. Involved in Revamp Projects & Plant Operation Requirements detail drawings. To visit at site and make modification and Proposed Piping layout as per Process requirements and making As built drawings for existing Plant.

PERSONAL PROFILE

Father’s Name : A.Rajendran

Martial Status : Married

Nationality : Singaporean

Date of Birth : 10-10-1982

Passport No : E4857677H

Place of Issue : Singapore

Date of Issue & Expiry : 21-02-2011 to 20-02-2021

Languages known : English, Hindi, Tamil & Malayalam

Permanent Address : Block 197, #05-705,

Rivervale Drive, Singapore-540197.

PhoneNo.+658*******/82616953

Mail id : acwqbn@r.postjobfree.com

acwqbn@r.postjobfree.com

acwqbn@r.postjobfree.com

Reference name

1. Name: Veeran Thangavel

Lead Piping Design

M/S CB&I PTE LTD., Singapore.

Email: acwqbn@r.postjobfree.com

TELEPHONE NUMBER +65 68714677 +65 90849070

2. Name: Perumal Babu

Piping department

M/S SMOE PTE LTD., Singapore.

Email: acwqbn@r.postjobfree.com

TELEPHONE NUMBER +65 81233767 +65 65727878

Contact this candidate