OBJECTIVE

To gain a career with a well established company as an air quality tester.

EDUCATION

Redstone/Rice Aviation: Houston, Texas: Graduation Date: July 10, 1992. GPA: 89

Studied the acceptable methods, techniques & practices for the operations, troubleshooting, repair, inspection, and maintenance on the following airframe systems: Instruments, Landing Gear, Welding, Fire protection, Electrical, Hydraulic, Pneumatic, Fuel, Ice/Rain, Communication/Navigation, Assembly/Rigging, Wood, Sheet metal, & Composite structures. Tear down inspections on following reciprocating engines: IO-470-IO-540 and R-680 & turbine engines YJ-69-T17, Viper 522 Rolls Royce, Allison 250-C18, Pratt & Whitney PT6A-27, Westinghouse J-34, and GE J -47.

Lone Star College: Houston Texas:

(CNC programming classes) – Technical Read & Sketch, Basic Machine shop I, Gibbs-CAM, CNC Machine Centers, CNC Turning Centers. Learned how to write CNC code for HAAS like equipment.

(Computer classes) – Introduction into computers, (PC operating systems, Microsoft Word, Excel, Access, Power point).

(Medical classes) – Psychology I & II, Human Anatomy & Physiology I & II, Microbiology, Pharmacology.

(Prerequisite classes) – Sociology, Comp & Rhetoric, Tennis I, Theatre, Public Speaking, & Interpersonal Communication. Current GPA: 3.80 College Credit Hours: 73hrs transcript available.

On the Job Training: Proficient using Microsoft OS’s & Applications, including Microsoft Exchange Mail Server. Circuit board Solder technician. Intermediate Electronics, CDL class A driver. Microsoft Certified Professional. Oil field equipment mechanic on Rogers, Foster 95 & 97 Tongs and backups & AutoCrane 3500, 4004, & 5005 series mechanic. A/C recovery/repair Have taken & passed Osha 10, Basic Plus, & H2S certs in the past.

Schneider Training Academy: learned acceptable & unacceptable driving techniques from the Professional Truck Driver Institute. Received Graduation Certificates & Class A CDL license from TX DOT

Graduation Date: 7-13-2007

EXPERIENCE

Company: Moonlight trucking Job Title: dump truck driver Dates: 5-12-16 to 6-16-16

Drove Mack dump truck w/tag axle, hauled crushed concrete, base, stabilized sand, s/f, & asphalt.

Company: BK auto restoration Job Title: mechanic Dates: 2-26-16 to 4-22-16

Restoring older vehicles by installing electrical, cutting, welding, and restoring functionality of vehicle

Company: RC Materials Job Title: Dump truck driver Dates: 9-4-15 to 1-13-16

Drover Kenworth dump truck with tag axle safely. Paper log book as per DOT rules & regulations

Company: Cemex Job Title: cement truck driver Dates: 10-27-14 to 3-24-15

Drove Internationals, Peterbuilts, & Mack straight trucks

Delivered cement product to various customers like refineries, residential, roadways, schools, & commercial businesses, while using encoder tracking all stops made.

Maintained paper log books & inspection reports, insuring all repairs where completed as per DOT.

Company: Knight Transportation Job Title: CDL driver Dates: 8-4-14 to 9-8-14

Drove 10 speed Volvo delivery 53ft dry van on dedicated Macy’s account.

Used Old style QualComm

Company: Schneider National Job Title: Hazmat Tanker driver Dates: 5-26-14 to 7-1-14

Drove ten speed freightliner delivering 48ft tanker container of hazmat chemical to customers unloading by pump, air-off, or customers equipment.

OTR on east region of United States.

Transflow documents to head quarters

Responsible for maintaining clean hoses and equipment via qualawash locations.

Company: DDT Job Title: CDL Driver Dates: 12-16-13 to 3-11-14

Drove 53 ft 18 & 22 wheeler vans, flatbeds, & lowboys weighing 81K to 94K.

Order fuel, trip, trailer & overweight permits using Comdata via internet or phone.

Log drive time in commercial logbook & fill out pretrip inspection logs as well.

Navigate tight refinery roads using large tractor trailer going forward and in reverse.

Help load & unload equipment, hooking up hoses to pump trailer, filter press trailer, and support trailer. Built pigs and assisted with clean up work.

Company: C & H Pipe Services Job Title: Industrial Mechanic / Driver Dates: 10-15-09 to 9-3-13

Performed Mechanical Cleaning of Hydraulic tanks & hydraulic fluid / filter changes of 165 gallons of AW 68 hydraulic fluid. Made replacement hydraulic hoses using electric over hydraulic press.

Serviced & repaired mechanical / electrical problems to 3 Clausing Lathes, 2 Bridgeport mills, & other machine shop equipment.

Repaired & serviced over a dozen 3000, 4000, & 5000 lb cranes mounted on trailers & semi trucks

Maintained fleet of F550’s, E350’s, F650’s, F450’s, 4 Internationals, 2 Forklifts, small cars & trucks.

Documented all service work performed on equipment.

Record vehicle mileage for annual apportioned plates registration as per DOT. Maintained all annual inspections on trailers & kept up to date.

Repaired Tong & backups, adjusted ring & pinions, repaired hydraulic system pumps, hoses. & serviced Deutz engines that ran hydraulic pumps on trucks & trailers.

CDL class A driver / operator, welder, and machinist operator when needed.

Company: Cillis Car Care Job Title: Certified vehicle inspector, mechanic Dates: 1-2008 to 3-2009

State certified vehicle inspector.

Automotive repairmen.

Tow truck driver / operator using large GMC flat bed truck w/ wheel lift combo.

Company: Swift Trucking Job Title: Truck driver trainee Dates: 11-5-07 to 12-7-07

Learned to safely Drive Freightliner Semi Truck with a split 8 speed standard transmission.

Learned to safely hook and unhook 50 ft Van trailer.

Company: Schneider National Trucking Job Title: Truck Driver Trainee Dates: 7-13-07 to 8-13-07

Learned to safely drive Freightliner Semi Truck with a split shift 10 speed standard transmission.

Learned to safely load and unload 48ft tanker trailer & obtained my CDL class A license.

Company: Redsmiths Garage Job Title: Automotive Mechanic Dates: 3-06 to 12-06

Repaired vehicles brake system, engine over haul, clutch, suspension, & electrical problems.

Used snap-on scanner, oscilloscope, and Alldata equipment to develop analyze approach of repair.

Company: Adam Aircraft Job Title: A&P Mechanic/Composite Tech. Dates: 6-12-2003 to 7-30-2003

Assisted in making of A500 & A700 Fuselage, wing skins, spars, ribs, tail boom, and other airframe parts by applying carbon plies, fiber glass plies and honey comb in tool molds.

Vacuum debulked and heated vacuum debulked all parts created using 45ft oven, vacuum ports, release films, tapes, and release chemicals.

Assisted in combining composite airframe parts using presses and sealants.

Assisted assembly of proto type aircraft A700 in main hanger for air show.

Company: Gillans Engineering Job Title: Office Clerk / In house IT tech Dates: 4/09/2002 to 4/16/2003.

Filed large plotted drawings and folders for Civil, Structural, Survey, and ILC Depts.

Assistant Phone Administrator (Samsung phone system).

In house IT Domain Administrator & Mail Exchange Administrator (ver 5.5) for 25 end users.

Blue line copy machine operator for large drawings (24 x 36) and smaller.

Managed companies fleet on scheduled / unscheduled maintenance and records..

Service Agreements, Supplemental Service Agreements, PDS’s, transmittals, and fax transmittals.

Company: Auto Zone Auto Parts Job Title: Customer Assistance/Sales Dates: 12/10/01 to 4/18/02

Assist customers by listening to their specific problems and providing detailed solutions.

Perform various mechanical duties such as testing alternators, batteries, ignition modules, turning brake rotors and drums, checking engine trouble codes and testing voltage regulators.

Company: Zonetrader Job Title: Computer Repair Tech & Sales Representative Dates: 5-1-01 to 8-27-01

Started & managed barcode inventory program using MS Access database I created that collected information on all computer equipment we acquired from closed Compaq sites.

Repaired & tested computers, laptops, printers, fax machines, monitors, & projectors, for re-sell.

Generated status reports from Access database on weekly sales, inventory value, & backed up data daily.

Trained co-worker on how to repair computers & identify equipment and components.

Company: Compaq Computer Corp Job Title: Lab Support Technician Dates: 10-97 to 4-16-01

Diagnose, repaired, and tested all computer & computer related equipment. Backed up depts servers data.

Provided IT support for over 20 Engineers on test computer setups, hardware, software, internet - intranet access, phone service access.

Coordinated over 67 shows, demo’s, and photo shoots.

Configured, wired, & installed software on server racks (22U & 42U) then sent to shows like Lotusphere, Oracle Open World, NT Wizard, ITXpo, MS TechEd, & PC Expo.

Responsible for domestic / international shipping, & strict customs documentation.

Bar-coded equipment and maintained Access database for our depts. bar-code tracking program on items received, issued, & borrowed.

Company: Superior Core Staff Services @ Compaq Job Title: Solder Tech Dates: 4-97 to 10-97

inspected, repaired, & modified printed circuit boards using various soldering irons to remove and install IC chips, capacitors, resistors, and inductors.

Re-serialized boards including new revision, ordered parts, recorded parts used, & work performed.

Company: Petroleum Helicopters Inc. Job Title: A&P Helicopter Mechanic. Dates: 1/96 to 2/97

Received training and performed scheduled and unscheduled maintenance on Canadian Bell Textron 206, B3, L1, L3, and L4 Helicopters on & offshore. Occasionally assisted Heavy Helicopter mechanics at Morgan City Base finish inspections on Sikorsky 76, Bell 212, 214, & 412 Helicopters. Assisted with Medical BO-105 inspections at Houma base.

Replaced and Serviced mechanical parts including main rotor transmission, main rotor, tail rotor, tail boom, landing gear, free wheeling unit, ball joints, swash plate, control arms, fuel bladders, and floats.

Tracked and balanced main rotor and tail rotor using Chadwick strobe light equipment.

Kept detailed records of maintenance preformed in aircraft logbook, as required by the FAA and company’s strict record-keeping guidelines.

Inventoried and maintained tool inspection due dates, required chemicals, Aircraft Manuals, and upcoming aircraft replacement parts needed for upcoming scheduled inspections from off shore SS214 Kerr McGee rig.

Monitored weather forecasts incase heavy tie downs were needed for main rotor / landing gear to Helicopter deck to prevent aircraft loss or transmission main rotor / tail rotor damage.

Contact this candidate