Engineer Engineering

RESUME

*.

PERSONAL DETAILS

Name

:

MD SAKINUR RAHMAN

Address

:

Blk 269, Toh Guan Road, #10-85,

Singapore-600269.

Email: *********@*****.***

Contact

:

**-******** (Res.), 65-91551448 (mobile)

Nationality

:

Singaporean

Date of Birth

:

6th September, 1958

Marital Status

:

Married

Languages

:

English (fluent in reading, writing & speaking)

Bengali (fluent in reading, writing & speaking)

Hindi (Speaking)

2.

QUALIFICATIONS, PROFESSIONAL TRAINING & COURSES

Master Of Welding Engineering with Distinction, (University of Wollongong, Australia)

Bachelor of Science in Mechanical Engineering, (University of Chittagong, Bangladesh)

International Welding Engineer (from International Institute of Welding – IIW), Cert. (Diploma) No.: AU/IWE/00021)

Certified Welding Inspector (AWS CWI) from American Welding Society ( Cert. No.- 96011371) (Not renewed the Certificate after 12 years of Certification)

Underwent 2 months of hands-on welding with SMAW Process.

Currently, I am performing a research in association with Nippon Steel of Japan on Weldability of High Strength Structural Steels (above 500 MPa yield strength) with a view to reduce the overall weight of offshore topside platforms.

IRCA Registered Lead Auditor for ISO 9001:2008 Quality Management System. (IRCA Registration No.:1189839)

Introduction to Radiation Safety- Grade-A from National University of Singapore.

Course on Modern Management from University of Dhaka, Bangladesh.

Course on Welding Inspection – Organized by Singapore Welding Society

Safety First-Aid Course – Ministry of Manpower, Singapore

Non-destructive Testing (NDT) Level- II in RT, UT & ET

ASNT Non-destructive Testing (NDT) Level- III in MT (M-2266) (Not renewed the Certificate after 5 years)

3.

EXPERIENCE SUMMARY

I am having Master of Welding Engineering degree with Distinction from University of Wollongong, Australia, and, acquired about 30 years of diversified experiences in Oil and Gas industries involved in Engineering, Procurement, Fabrication/Construction, Installation and Commissioning (EPCIC) projects. I have specialization on Welding & NDT, and able to provide service on weld joint design, welding micro-structure and failure analysis, teaching and education in addition to regular welding engineering, fabrication, and inspection services such as, preparation of welding procedure specification (WPS), welding inspection etc. I am also having in-depth knowledge and experience on Non-Destructive Testing (NDT).

I am an IRCA Registered Auditor for QMS, and having experience in developing quality management plans/ programs, implementing and maintaining the Quality Management within the organization. I am having adequate experience in conducting internal audit to all department/disciplines of the organization and coordinating with external certifying agency (like, Lloyds, BV, DNV, ABS etc.) on external audits

During my career, I assumed various roles on Welding and Quality with the following primary responsibilities:

Welding:

Lead the team of Welding Engineers, Welding Inspectors, Welding Foreman and Welders engaged in the huge fabrication shop of SMOE PTE Ltd

Study of various types of Engineering Materials (ferrous and non-ferrous metals) and their weldability properties, perform quality assurance on welding design, study the needs for various Welding Procedures for the Project and prepare the Welding Plan.

Review the stresses, develop the weld joint design, review the joint design and joint detail, advise change requests and modifications etc.

Review Front End Engineering Design (FEED) and develop welding specifications for the Project, analysis of existing weld procedures, preparation and testing of new/additional weld procedures.

Develop welding training plan for the Welding Engineers/Inspectors, Prepare training study materials and course programs, conduct the training, and take the examination.

Participate/Conduct inter-departmental and departmental meeting, Prepare presentation materials for the meeting.

Provide technical knowledge and guidance to the engineers/inspectors and guide them in implementing welding processes in the project work.

Conduct failure analysis in joint collaboration with third party organization like DNV, BV or with local universities. Also, perform weld defect analysis, evaluate the defect trends, and provide suggestion to preventive and corrective actions.

Evaluate Welding requirements at bidding stage of the project.

Be the focal point for liaising with customers, engineers/inspectors and manufacturing/production groups on welding related matters on a daily basis.

Provide training to welders on preventing weld failures.

Assist with technical expertise to support all kinds of welding execution.

Coordinate with Certifying Authority for coordination on all welding certification matters.

Quality:

Lead the quality team (a group of Quality Engineers/Inspectors), Conduct quality orientation and quality awareness program for all employees through presentation and workshops.

Perform root cause analysis on quality observations and noncompliance, applying an appropriate and proven problem-solving methodology(s) involving cross-functional teams (where appropriate), and develop statistical analysis on the trends of findings, and thereby provide recommendations for improvements and effective solutions to prevent recurrence.

Participate in the meetings, internal (inter-organization) and external (customer) as an active representative to communicate and exchange needs and requirements on quality management system.

Drive steady improvement efforts to evaluate opportunities for improvements in organization’s operating process, cost and product quality.

Analyse the training needs, and thereby, conduct quality training with view to develop and continual improvement of the quality culture in the organization.

Analyse the customer satisfaction surveys and feedback, and provide recommendation and improvement proposal on customer’s concerns/feedback.

4.

CAREER BACKGROUND

4.1

SMOE Pte Ltd (http://www.smoe.com/)

Company Profile:

SMOE is Singapore based EPCIC company with specialisation in Engineering, Procurement, Fabrication & Construction, Installation and Commissioning of OFFSHORE Works such as TOPSIDES, PLATFORMS, FLOWLINES, PROCESS PIPING etc. It has huge fabrication yard at Singapore, Indonesia and China. It is a pioneer fabrication yard in Singapore, which deals with piping works of various exotic materials like Duplex, Super Duplex, Titanium, 6Mo, Aluminium etc. It has also specialization of welding thick of high strength Structural Steels and super duplex stainless steels. Our shop (SMOE Pte Ltd) is an ISO 3834 Certified. Its regional network includes operations in Malaysia, Indonesia and China.

Period:

From Jan 2011 to date

Projects (accomplished)

1. Just completed (06 Jun’2016) EPC of Ivar Aasen Topside pdQ of

Det Norske Oljeselskap ASA ( DN).

Ivar Aasen is oil field and is located in block 16/1 between the Sleipner and Grane fields in the North Sea. Ivar Aasen has also gas caps which may lead to high producing gas-oil-ratio in a period until the gas cap gas is produced. Partially processed hydrocarbons will be sent to the Edvard Grieg platform for final processing and export. Ivar Aasen operated by Det norske oljeselskap ASA holding 35% interest. The other license partners are Statoil (50%) and Bayerngas (15%).

2. ConocoPhillips Scandinavia AS’s Greater Ekofisk Area, Area,

Eldfisk Ii, 2/7s New Wellhead, Process And Accommodation

Platform Topsides & Bridges installation works.

3. PTTEPI's Zawtika Processing Development Project, Phase 1A

(Processing Platform integrated with Living Quarter module).

The Zawtika Project is a gas field development project located in

the Gulf of Moattama, Myanmar. The development area covers

Block M9 and small portion of Block M11, owned by Myanmar Oil

and Gas Enterprise (MOGE). The field lies approximately 300 Km

south of Yangon and 290 Km west of Tavoy on the Myanmar

coast and the average water depth of 135 ~ 160 meters.

4. Naga-Pelikan

5. AP LNG

Position

Senior Manager, Welding & QA/QC

4.2

Rotary Engineering Limited (REL)

Company Profile:

REL is Singapore based EPCC company with specialisation in Engineering, Procurement, Construction and Commissioning of Oil Storage Tanks, Piping and Equipment works. Its regional network includes operations and projects in Malaysia, Indonesia, China, Thailand, Saudi Arabia and Dubai.

Period:

From Jan 2009 to 31 Dec 2010

Project

Saudi Aramco Total Refining And Petro-Chemical (SATORP)’ Project (Package – 6) of Jubail Export Refinery Plant in Kingdom of Saudi Arabia (KSA).

Position

Manager (Welding & NDT)

4.3

Jacobs Engineering Singapore Pte Ltd (JES)

Company Profile:

Jacobs Engineering Singapore (JES) is subsidiary of Jacobs Engineering Group Inc. USA, one of the world’s largest and most diverse EPCm contractors. Its global network includes more than 160 offices in over 20 countries. It has operations in North America, the United Kingdom, mainland Europe, India, Australia, and Singapore.

Period:

Sep 2006 to Jan 2009

Projects

Singapore Anti-Oxidant Plant Project of Ciba Specialty Chemicals; Sakra Nitric Acid Plant of Invista.

Position

QA/QC Manager

4.4

FMC Technologies Singapore Pte Ltd

Company Profile:

It is one of the subsidiaries of FMC Technologies Inc., and specialised in design, manufacture and servicing of technologically sophisticated systems and products such as subsea production and processing systems, surface wellhead systems, high pressure fluid control equipment, measurement solutions, and marine loading systems for the oil and gas industry.

Period:

Dec 2005 to Sep 2006

Projects

Surface and sub-sea trees, manifolds and flowlines for Muphy-Kikeh, ENI and Woodside Project.

Position

QA Coordinator

4.5

SembCorp Engineering Pte. Ltd. Singapore

Company Profile:

It is the Subsidiary of SembCorp Industries, and one of the largest EPC Companies in the South-East Asia.

Period:

Sep 1999 to Dec 2005

Projects

Onshore Receiving Facilities Project (EPC of Pressure Regulating & Metering Facility for downstream natural gas of West Natuna sub-sea pipe line) at Singapore (Main Contractor – McDermott South East Asia Pte Ltd and Owner was CONOCO); Natural Gas Reticulation Project at Tuas and Jurong Island, Singapore (Construction of Distribution Network of Natural Gas for SembGas; Kerosene Distillation Unit (KDU Plant) of Chemical Process Technology Centre for Nanyang Polytechnic in Jurong Island (Consultant: Shell and Chiyoda; Chestnut Avenue Waterworks Project of PUB, the Consultant is Black & Veatch. This is one of the biggest Surface Water Treatment Plant in south-east Asia, which was constructed in joint venture with Thames Water of Australia. I worked as a Project Quality Manager for SembCorp with the Commissioning Manager of Thames Water, and performed the entire quality works, and finally, the turn-over works of the Plant

Position

Project Quality Engineer (Senior Engineer)

.

4.6

Jurong Engineering Limited (JEL), Singapore

Company Profile:

It is one of the largest Oil. Gas and Infrastructure construction company in the region and partly owned by IHI, Japan.

Period:

May 1995 to Aug 1999

Projects

Mobil Lube Base Oil Project of Mobil Refinery in Singapore; Liquefied Petroleum (LP) Gas Plant at Algeria; Kedah Fertilizer Factory of Petronas in Malaysia; Singapore Acrylic Easter (SAE) Plant in Singapore (Jurong Island).

Position

Senior QC Engineer

4.7

Far East Levingston Shipbuilding Ltd (FELS) Singapore

Company Profile:

It is one of the largest Shipyard under Keppel Engineering in the region.

Period:

Feb 1994 to May 1995

Projects

Conversion and erection of offshore drilling module (FPSO, Drilling Rig) etc. Owners were SANTA FE, SMEDVIG.

Position

Senior QA Inspector (Welding) – The position involved performing of Weld inspection by Visual and NDE. The scope of inspection includes material verification, welding of hull structure and process piping. Materials involved: Carbon steel, Alloy Steel, Stainless Steel, Duplex and Super Duplex Stainless Steel, Nickel alloys etc.

4.8

Titas Gas Transmission and Distribution Company Limited (TGTDCL). Bangladesh.

Company Profile:

It is the country’s largest Gas Transmission and Distribution Company and 100% owned by the Government of Bangladesh. The longest gas transmission and distribution belongs to TGTDCL.

Period:

Jan 1991 to Feb1994

Establishments

Gas Regulating and Metering Stations, High Pressure Gas Transmission and Distribution Pipelines

Position

Quality Manager

4.9

Pipe Line Engineering GmbH (PLE) of Germany.

Company Profile:

PLE is the renowned Consultant and Engineering Company of Germany. It worked as consultant for the Longest Cross Country Natural Gas Transmission Project in Bangladesh. The line pipes ranges from 6” DN to 24”DN of API X70 grade of materials.

Period:

1990 to 1991

Project

Brahma Putra Basin Natural Gas Project (High pressure Cross Country Pipeline of over 220 Kms).

Charge and Functions:

Welding Engineer (Resident Engineer)

Review Front End Engineering Design (FEED) and develop welding specifications for the Project. The responsibility also includes weld design, review welding details, supervision of field construction of welding and NDT.

Monitoring of existing weld procedures

Advising and implementing new weld process.

4.10

Bangladesh Oil, Gas & Mineral Corporation (BOGMC), Dhaka, Bangladesh.

Period:

1984 to 1990

Project

Development of Titas Gas Fields (On-shore), Bakhrabad Gas Fields (On-shore), Shemutang Gas Field (Off-shore)

Charge and Functions:

Assistant Engineer (QA/QC)

END OF THE RESUME

Contact this candidate