Resume

Sign in

Electrical Engineer Maintenance

Location:
Iraq
Posted:
October 19, 2016

Contact this candidate

Tarek Hussien Mohamed Ali

** **** **-******* **, Nasr City, Cairo, Egypt

Telephone: 002*********** (EGY)

009*********** (UAE)

009************(IRQ)

Email: acw4z2@r.postjobfree.com

acw4z2@r.postjobfree.com

Professional Profile

Electrical Engineer with 15 years’ Experience in Maintenance, Installation, Project and Training in the oil field, Have the following Certificates

Master of occupational health and safety– Electrical Safety (expected 2017)

PMP ® (Project Management Professional)

COMPUTERIZED MAINTENANCE MANAGEMENT SYSTEMS (CMMS)

Reliability Centered Maintenance (RCM) ASME Code- ENPD 03

QCF/NVQ Level 3 Certificate in Assessing Vocational Achievement

Certified Professional Instructor

Certified Professional Trainer (TOT Diploma)

Oil and Gas Production Safety Diploma (OGPSD) ID 201********

General Industry Safety Diploma (GISD) ID 201********

Construction industry Safety Diploma (CISD) ID 201********

Further offshore emergency Training (FOET) Vantage # 1242361

Experience in LV and MV (up to 1KV, 6.6kV, 11kV and 33kV) for (Switchgear, Power Transformer, Power cables, A.C Motor), MCC (Motor Control Centers), DC Motor (600 VDC, 100HP), Diesel Generator, Gas Turbine, Power generation and substation, VFD (Variable Frequency Drive) system, PLC, SCADA, DCS system, SCR (Solid Control Rectification), Soft Start,,HPS (Horizontal Pump System),ESP (Electrical Submersible Pump), Amphenol System (I / O interface), UPS System, and EX Electrical installation equipment in Onshore /Offshore projects

Prove leadership skills involving managing, developing and motivating teams to achieve the objectives.

Reliable, trustworthy and meticulous, gained a good understanding of what is required of an electrical engineer

Objective

Looking for a new opportunity and new challenging position within the corporate sector, to obtain a challenging position in a high quality engineering environment where my resourceful experience and academic skills will add value to organizational operations.

Career Summary

2013 – Till Now

ELECTRICAL TRAINER / PROCEDURE WRITER CONSULTANT

PETROFAC TRAINING SERVICE

Working as Electrical Trainer and Procedure writer Consultant in Basra, Iraq Projects / ExxonMobil “EMIL” West Qurna 1 “WQ1FOD” Brownfield Project to support the following project

1.Upgrade the Degassing station DS6, DS7 and DS8

2.Water Treatment system MOD300 – New Project

3.Early Power Station Projects GTGs Gas turbine Generators – New project

Contribute in preparation of Individual Development Programs (IDPs) in conjunction with Electrical Maintenance Managers, Training Department and Performance Management Team to provide systematic guidelines towards competency enhancements of individuals.

Delivering Electrical training program and ensure timely completion of qualifications and support the embedding of Functional Skills.

Creating and developing the required training material modules (course outlines, background material, instructional materials, and training aids) to achieves the training strategies, developing OJT training programs and participate on teams developing training plans and OJT programs

Implementing the OJT program for employees, this includes training and observation of trainees with respect to their performance against established training objectives and recommendation of additional skill requirements as training needed.

Design training materials & classroom agenda, maintaining technical knowledge by attending educational workshops, courses to meet customer and client needs

Maintaining safe and healthy training environment by following organization standards and legal regulations and maintain orderliness and cleanliness of assigned area(s) and observe company policies at all times.

Ensure the quality and consistency of course content throughout a course life cycle and evaluation and modification of existing training solutions, techniques and materials

Managing the training program in accordance with business needs, regulatory requirements, and Competency Assurance System (CAS)

Evaluates students' progress in attaining goals and objectives and establishes criteria and tests the students in order to measure each student's progress and Evaluates training by evaluating effectiveness of training to specific job applications

Carrying out regular learner reviews as required and updates learner files to reflect achievements, including the updating of tracking sheets. Through the review process, set and monitor training targets that effectively link on and off the job training.

Review Electrical IDP and link the Training development plan to the electrical road map

Ensure keeping the accurate records of learner progress and achievement, which are regularly shared with the relevant employer

Act as Subject Matter Expert (SME) at the learning and development department, providing professional advice and support to the department

Attending internal team and other meetings as required

Leads and administers the preparation and approval of the Competency Assurance Management System (CAS) such as: Development Framework (DFW) & the Individual Development Plan (IDP). In addition; ensures that CAS Development Framework is applied and implemented in accordance with the agreed CAS Policy and standards and are updated / tailored as per the company needs.

Follows up with CAS Advisor to ensure the CAS Frameworks and Training Road maps for the assigned Discipline are applied in accordance with the agreed CAS Policy, individual Development Plans and activities for the Learners are delivered and meet Company needs.

Develop the Electrical Procedure required for the Plant and work packages for work to be performed by the respective maintenance departments to insure that the plant maintenance is performed in a safe, reliable, and efficient manner, in compliance with the QA manual, company policies, procedures, and applicable codes and standards.

Develop revise, and review maintenance procedures to facilitate and enhance work package development, maintain compliance with codes, standards, and vendor recommendation, and maintenance direction

Define procedures, drawings, equipment and materials required to performing planned work packages.

Providing assists for working on problem solving, continuous improvement or safety programs, cross training of operators; performing technical checks on equipment; assist with training programs in other departments and checking for correct procedure and accuracy

Verify work instructions are adequate and comply with all applicable Degassing station procedures.

Participating in HAZOP / RA (Risk Assessment) reviews as required to provide leadership in the upkeep, development and improvement of the maintenance management system for the core discipline, ensuring adherence to processes and procedures and undertaking departmental performance audits on a regular basis

Review existing Procedures and IDP Job profiles prior to producing competence standards for CAMS requirements

Producing Assessment, Verification and coaching procedures for CAS requirement and producing various training related documents as and when required

Carrying out Procedure assessments of candidates in the work place in accordance with WQ1 FOD Exxonmobile requirements

2010 - 2013

SUPERVISOR ELECTRICAL ENGINEER (ONSHORE & OFFSHORE)

SINOTHARWA DRILLING COMPANY (Sinopic China)

Troubleshooting, Maintenance and Commissioning of electrical equipment (LV AC Motor, DC Motor, Diesel Engine, Top Drive Varco TDS11s, TESCO ECI900 HPS, EPS, Power Generator, LV/MV switchgear, LV/MV power Cable, Fire alarm system, H2S detector system and EX Electrical Equipment)the onshore & offshore

Supervision and direct execution of planned breakdown maintenance program and repairs electrical equipment assigned in the field

Develop and Supervision of shutdown plans, analysis of shutdown work lists, Identify the specification of shutdown materials, identify of manpower, identify equipment requirements, control of shutdown budgets and contract specifications

Develop schedule preventive maintenance program (PM) and Predictive maintenance (PT&I) to reduce Corrective maintenance for the electrical equipment according to Service manual

Follow up, Mentor and coaching the implementation of the Preventive maintenance (PM) and Predictive Maintenance (PT&I)

Carries out (RCM) analysis, presents regular reviews/reports on the performance of equipment, Key Performance Indicator (KPI) and provide suggestions for improvement/Development the maintenance program for major equipment, including site guidance on equipment observations and failure analysis (RCA/RCFA).

Prepare and develop the SU/SD procedures to start/Shut down the plant in a safe and cost-effective manner

Provide instructions for special procedures, standards and materials required, monitor and follows up to ensure all work is carried out to high technical and safety standards and evaluate equipment and maintenance history to determine the effectiveness of maintenance procedures and maximizing equipment reliability and runtime

Prepare annual Maintenance budget required for overhauling and Spare parts

ensure relevant maintenance procedures are reviewed and updated on a timely basis & improve the quality of data input into the Oracle system (EAM/Enterprise Asset Management ) (CMMS)

Be responsible of new installations, upgrades and modifications electrical equipment in onshore and offshore Project

undertaking relevant research; producing and implementing designs and creating test procedures

Responsible for technical evaluation of Bids and Responsible for managing/contributing to one or more project simultaneously from definition to handover of the projects and Prepare/disseminate all required documentation such as project specifications, instrument data sheets, level sketches, requests for quotation, requisitions, etc

Assist Procurement Department in specifying technical requirements relating to equipment purchase or equipment repairs within area of responsibility, Monitor and document communication and contractor on technical issues and administer and control authorized project budget spend for all relevant scopes

Coordinate with various managers in the Maintenance Department to identify individual and team business related training needs.

Contribute in preparation of Individual Development Programs (IDPs) in conjunction with Maintenance Managers, Training Department and Performance Management Team to provide systematic guidelines towards competency enhancements of individuals.

Develop and implement People Planning, including all learning and development as per IDP, working collaboratively with relevant department (Training & HR) to meet their set goals

Developing and implementing People Planning, including all learning and development as per IDP, working collaboratively with relevant Training department to meet their set goals.

Contribute to the development and implementation of competency program in order to achieve department goals and objectives.

Provide the detailed student progress reports containing the assessment, level of competence, attendance and behaviors of the trainees.

Maintaining safe and healthy training environment by following organization standards and legal regulations

design appropriate courses for the trainees and to schedule their release to the operational plant to enable them to quickly develop and utilize their new skills on the job

Delivering Electrical training program for Sinotharwa electrical Staff

Monitor and evaluate operational need, identify planned solutions on succession planning, talent management and training for Maintenance Department.

Design clear certification system for the respective maintenance department including procedure, process, test, etc

2008 - 2010

SR.ELECTRICAL ENGINEER - OFFSHORE & ONSHORE

SINOTHARWA DRILLING COMPANY (Sinopic China)

Worked at offshore Rig ST#BAHARI-1 JACK-UP Rig (6th Generation), onshore Rig ST#10 (1500 HP) and ST# 9 (2000 HP) with VFD, PLC Siemens S7, SCADA,,DCS System, Amphenol System (I / O interface), Pit Sensors, Drawworks 4600/2000 HP,Operating water depth: 400 ft (122 m),Drilling depth: 30000 ft (9,144 m), Mud pumps 2200/1600 HP,Power generation Cat Engines 3516B/3512B & Emergency Cat Engine 3512/3406, Dry Transformer, Electrical Submergible Pumps (ESP), Horizontal Pumping Systems (HPS), Electrical Distribution panel, Cranes,MCC (Motor Control ),fire alarm system and H2s gas monitor

Implement and Supervision of preventive maintenance (PM) programs according to Maintenance schedule Plan (daily/weekly/monthly and 6 monthly, yearly and 4 yearly) as per computerized maintenance management system (CMMS) of electrical equipment to ensure proper and efficient operation.

Ensure adopting sufficient safety procedures by holding of pre job safety meeting with all involved crew and issue JSA (Job Safety Analysis) and issue (PTW) work permits as required.

Follow international safety procedures during Operation and maintenance processes

Performs and interprets power calculations, insulations tests and positive relay tests as required.

Completes reports of repair and maintenance performed.

Effectively communicates electrical information to clients, supervisors and electrical workers.

Assigns tasks to electrical workers as required.

Manage spare parts inventories through the materials warehouse and ensure that all electrical, control and automation spare parts of process equipment and utility installations are identified and proper stock level is proposed

Coordinate daily inspection, recording and condition base monitoring (CBM) of utilities equipment’s and production machine.

Ensure all records are taken accurately and on a timely basis and corrective actions are taken for all abnormalities

Prepare annual Maintenance budget required for overhauling and Spare parts

Assists, coordinates and monitors the operators during rig transfer operations, supervising in particular the disassemble, loading, unloading and assembly of the electrical devices and equipment

Trains and supervises junior electrical staff

2006 - 2008

ELECTRICAL ENGINEER - OFFSHORE & ONSHORE

EGYPTIAN DRILLING COMPANY (Maersk Drilling)

Worked at the EDC head office as Electrical Engineer and be responsible for technical support of electrical maintenance and electrical project Drilling Rigs (Onshore and Offshore) upgrade Rigs and New Rigs

Overhaul, Maintain and Install DC Motor to 1000 HP & AC Motor to 1600 HP, Generators to 1714 KVA, trouble shouting Diesel Engine model 3512B,C15,C18 with ECM and Diesel engine model 3406,399,398

Base urgent repair jobs and new installation (Electrical Motor, Transformer, Instruments, Valves, Generator, UPS, Camera System…etc)

Ensure of adopting sufficient safety procedures by holding of pre job safety meeting with all involved crew and issue JSA (Job Safety Analysis) and issue (PTW) work permits as required.

Follow EDC safety procedures during operation and maintenance process in the onshore/off shore rigs

Travel to the field for trouble shooting, Inspect and repair electrical equipment as required in the field.

Coordinate with other departments and assist during troubleshooting or repair

Unscheduled and schedule projects (New Installation & Projects onshore rigs and offshore rigs)

Be responsible for new installations, upgrades and modifications of all electrical equipment and like as Motors LV (AC &DC),Diesel Generators, Power Generation, LV Power Transformer, MCC, Distribution Panel and LV Power cable Termination, EX Electrical Equipment and EX Plug Station in onshore and offshore Project

Ensure all equipment and installation are operationally safe and comply with local legal legislation and Coordinate, train and supervise contractors, ensuring work are done in line with EHS and Hygiene regulations.

Identifies and makes all the necessary arrangements and follow up the necessary attachments within the company and external workshops/contractors of the assigned related disciplines

Prepares the Statement of Requirement for electrical material required for the project

Manage spare parts inventories through the materials warehouse

Develop maintenance programs through the Computerized Maintenance Management System (CMMS)

2006 - 2006

TECHNICAL SPECIFICATION ENGINEER / CABLE DESIGNER

ELSWEDY CABLES

Design the (L.V & M.V) Power cable and (O.H.T.L) according to the international standard Such as (IEC, BS, etc.)

Testing and Trailing the incoming raw material

Presenting the technical support, Review contracts and operations projects and determine the amount and types of cables used in this project, turnkey project for power generation & transmission and distribution

Identification and design of cables depending on the loads required and calculations for short circuit

Inspection for the material which used in the cables industry according to the international standard

Earthling system sizing, calculation and equipment specification, Load flow, short-circuit calculation, protection sizing

2005 - 2006

ELECTRICAL MAINTENANCE ENGINEER

CAN FOR MANUFACTURING & FILLING CANS(CHEMICAL INDUSTRIES)

Implement and Supervision of maintenance program for electrical equipment in the manufacture such as (Transformer 11KV/400V,1 MVA), Lanico - Can-Making Equipment (Aerosol can-making machines), Can Flange (Round Can), Sydronic Machine, Plastic Extrude machine,Chiller, Air Compressor,Shrink Machine,CCTV, Fire alarm System, Product Elevators,VFD (Variable frequency drive ) Danfoss,Elevators

Direct execution of planned breakdown maintenance and repairs electrical assigned in the field

Develop of shutdown plans, analysis of shutdown work lists, Identify the specification of shutdown materials, identify of manpower, identify equipment requirements, control of shutdown budgets and contract specifications

Develop schedule preventive maintenance program (PM) and Predictive maintenance (PT&I) to reduce Corrective maintenance for the electrical equipment according to Service manual

Regular maintenance of pistons department, packing department and packaging machines

Follow-up of periodic maintenance for all production lines, follow up Preventive maintenance (PM) for all equipment’s, Production lines, follow up of programmers/progress report/performance cost and production losses and troubleshooting for all equipment’s

Discusses work orders with initiators and operation supervisors, recommends best method of resolving the operation problems

Coordinate with other departments (Operation/QA) and assist during troubleshooting and repair

Manage spare parts inventories through the materials warehouse

Studies and analyses capital and major maintenance works, coordinates the integrity of company asset/equipment database and maintenance strategy, objectives

2002 - 2005

ELECTRICAL ENGINEER OFFICER (First Lieutenant)

MILITARY DEFENSE - AIR FORCE

Service at Armed Forces with the rank “first lieutenant”

working as maintenance officer engineer in the Battalion of military aviation equipment

Provide instructions for special procedures, standards and materials required, monitor/ follows up to ensure all work is carried out to high technical and safety standards and evaluate equipment and maintenance history to determine the effectiveness of maintenance procedures and maximizing equipment reliability and runtime

Supervising the implementation of special projects at airports according to international standard

Responsible for timely completion of approved projects at minimum cost, to the required technical specifications in line company policies, objective procedures, meeting all quality, health, safety & environmental objectives and execute projects within budget, schedule, & adhering to the specification, quality, health safety security, environment requirement

Review all proposed engineering design to manage the process of conceptual detailed design and arrange for project documentation such as operations & maintenance manuals through interface with equipment suppliers & vendors, and coordinate on construction activities, commissioning, handover activities & project closeout.

Writing reports and documentation and analyzing and interpreting data collaborating with a team of scientists and engineers and compile project documentation related to QA/QC matters and follows up

Develop and implement annual training program of military unit staffs, including all learning and development as per IDP to meet their set goals

Contribute to the development and implementation of competency program in order to achieve department goals and objectives.

Preparing and conducting technical training programs, completion of training needs analysis, conducted training needs assessment by collecting information pertaining to work procedures

Implement the classroom and practice training program, this includes training and observation of trainees with respect to their performance against established annual training program objectives and recommendation of additional skill requirements as training needed

Education:

Level

Subject

University

Grade

Date

Bachelor Degree

Electrical Engineering

Helwan University

good

2002

Master Degree

Master Occupational Health and Safety

Delaware City University

Expected 2017

Professional Development

CERTIFICATED:

ACS 800 (ABB Drive) Maintenance & Operation (ABB CERTIFICATE)

SIMATIC S7 PLC (BASIC & ADVANCE)

Mastering Primavera P6 (Primavera P6 Scheduling & Costing) (YAT Learning Solution)

Hydrogen Sulfide-H2S in according with ANSI/ASSE Z390.1-2006(R2010) & API Recommendation practices for Hydrogen Sulfide Training from IASP – ID 201-***-****

API-74 for Occupational safety for Onshore Oil and Gas Production operation overview from IASP – ID 201********

Permit-Required confined Space Entry from IASP – ID 201-***-****

Incident investigation & Reporting Procedure from IASP – ID 201-***-****

Workplace Safety Inspection Technician from IASP – ID 201-***-****

Safe Work at height from IASP – ID 201-***-****

Crane & Derrick Safe Practices from IASP – ID 201-***-****

Specialist and IT Skills

Specialist:

Maintenance Management, Project Management, Instructor, Trainer, OJT, Oil Gas, CMMS, RCM, Offshore, Onshore, Drilling, Upstream, Degassing, Reliability, Inspection, Planning and Schedule, Shutdown plan, CAS(Competency Assurance system), Assessor

IT Skills:

Office Package, Auto CAD, Oracle, MS Project, Internet and Primavera P6

Personal Details

Day of Birth :

Material Status:

Languages:

16-July-1980

Married ++

Arabic : Native

English :Read (Excellent),Write (Excellent),Speak(Excellent)

Interests and Activities

Currently include:

Reading,Swimming, Diving,Driving



Contact this candidate