Engineer Maintenance
Resume:
Joel D. Ramos
Van Nuys, *1405
July 24, 2016
To Whom It May Concern:
Re: OVERNIGHT ENGINEER
Greetings!
Your job description for a OVERNIGHT ENGINEER matches my qualifications, and I am very interested in the opportunity.
As stated in my resume, I graduated Bachelor Of Science In Mechanical Engineering (B.S.M.E.) in 1991 and passed the Philippine Government Licensure Examination in 1992. My working experience as an engineer started in the Philippines where I joined a Japanese multinational company and I was offered to be trained in Fukuoka, Japan to pioneer the same company to be based in the Philippines and worked there for about five (5) years as Maintenance Section Head.
I was also given a chance to work at a French firm in Fukushima, Japan as Lead Maintenance Engineer for more than seven (7) years.
In preparation for practice here in the USA, I finished and graduated REFRIGERATION And AIRCONDITIONING course (HVACR) and passed the EPA 608 Certification Test (Type I, Type II, Type III, & Universal), here in Los Angeles, California.
Working in the Philippines, Japan and currently here in Los Angeles widened my perspective not only as an Engineer but also immersing myself into the different culture and dealing with people.
I am looking for a new job because they were secretly selling the building where I work right now and we aren't sure if we are going to be absorbed by the new owner.
Sir/Madam, I know I would be a valuable asset to your company. Please feel free to call me at your convenience at 818-***-**** or send an email to ************@*****.*** to arrange a meeting. I look forward to speaking with you.
Sincerely,
Joel D. Ramos
Comprehensive Resume' Of
Joel David Ramos
BSME, RME Lic # : 0044738 (PHILS)
ADDRESS:
13915 Sherman Way #109
Van Nuys, CA
91405-2500 USA
Tel 1-818-***-****
Emails: ************@*****.***
************@*****.***
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WORK EXPERIENCE
Realtech Construction, LLC
ONE PARK PLAZA
3250 Wilshire Blvd.
Los Angeles, CA
90010 USA
Building Engineer
Feb 2014- Present
Duties And Responsibilities
Planning, scheduling and Evaluating preventive maintenance of equipment used in the building (ie. Diesel Engines, Boilers, Cooling Towers, Pumps, Motors, Fans and Blowers).
Analyzes all equipment to improve operation and efficiencies. These equipment include:
Heat Pumps (3.5 - 5.5 HP) - approx 500 units
Cooling Towers (12.0 Million BTU/HR Each)- 2 units
Water Softener system for Cooling Towers
Boilers ( 2.25 Million BTU/HR Each) - 2- units
Centrifugal pumps ( 840 GPM) and (50 HP) Motors
Water Sprinkler System
Domestic water pumps (90-250 GPM)
250 HP Diesel Engines (ICE) - 2 units
1.5 MW Diesel Engine - 1 unit
Fire Pump Motor - 250 HP
Fire pumps - (750- 1500 GPM)
Jockey pump ( 5 HP/ 11 GPM )
Fans and Blower motor
Sump pumps And
Air Filters & Motors For Supply And Air Exhaust Systems.
Formulates and develops preventive maintenance schedules and checklists on all equipment used in the building mentioned above.
In-Charge in monthly testing of three (3) backup Diesel Engine Generators to ensure reliability.
In-Charge in weekly testing of two (2) backup 250 HP Diesel Engine and Fire pumps.
Maintain proper operations of all HVAC systems, Mechanical, Electrical and Plumbing systems throughout the building to minimize downtime operation and maximize effectiveness and safety.
Conducts performance test on every HVAC unit to be installed to assess its performance and efficiency.
In-charge in the Maintenance of water softener system used for the cooling towers by maintaining safe PH level, conductivity, turbidity and etc.
Maintain parts and equipment stocks and inventory.
Maintains Maintenance logs, checklists and records.
JOB EXPOSURES
Assist the Chief Building Engineer in maintaining the entire building property, including the physical building structure, all mechanical, electrical, HVAC systems and related equipment with particular attention towards safety, guest satisfaction, security and assets protection.
Conducts daily property tour to visually assess the safe and efficient maintenance and operation of the physical structure of the building; paying particular attention to proper functioning and appearance of all mechanical equipment; proper functioning and appearance of all electrical and backup systems; overall exterior and interior appearance of the building.
Assist in identifying energy savings and other cost reduction opportunities.
Assist in supervising the day to day operations of Engineering and Maintenence department.
Assist in research and recommendations for more cost-effective and efficient methods of operating and maintaining building systems.
Installation of HVAC unit w/c includes duct work and piping installation, brazing and soldering.
Oversees and inspects the work performed by vendors and outside contractors.
Routine repairs as per request. These requests include :
HVAC trouble;
Power outage;
Ballast replacement;
Door locks repairs and installations;
Plumbing repairs, i.e. leaky/clogged pipes, faucets and other maintenance/technical assistance as needed.
Assists in Carpentry works as needed i.e.
hanging/repair and painting Drywalls,
install kitchen Cabinets/sinks/urinals/toilets and etc,
install Floors and Carpets, and etc.
Maintains life safety, environmental and emergency procedures and programs per local and building codes.
Provides emergency response services 24/7.
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
JORAM Car Trade Centrum
Metropolis Star Mall
Alabang, Muntinlupa
Metro Manila
Proprietor
Feb 2003 – 2013
Business Profile And Job Exposures
Buying And Selling Of pre-owned cars.
Diagnoses newly acquired pre-owned motor vehicles' troubles.
Prepares motor vehicle, if necessary, for Engine repair, body repainting, Tune ups and troubleshooting.
Negotiating the price of the car and explaining/ emphasizing its features.
Maintaining sales records.
In-charge in all paperworks for vehicles documentation, i.e. financing, transfer of ownership and etc.
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
SIMON CORPORATION
Yanaizu City, Fukushima
Fukushima, Japan
Lead Maintenance Engineer
July 1995 - Nov 2002
Duties And Responsibilities
Directly reporting to the Plant Manager,
Researched And Development on Mechanical enhancements And technical feasibility of new machines and designs.
In-charge in the maintenance of the following Equipment & pneumatic machines:
2 (two) unit Diesel Engines.
2 (two) unit Air compressors
4 (four) unit Injection And molding machines,
Assist in the scheduling of maintenance of 2.0 MW Diesel Engines.
Reports activities undertaken as well as the operating conditions of all operational equipment.
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
ROHM ELECTRONICS PHILIPPINES, INC.
PTC Carmona
Cavite, Philippines
Maintenance Supervisor - Section Head
Equipment Control Department/ Power Plant Section
Engine/ Generator Section
Sept. 1992 – July 1995
Duties And Responsibilities
Directly reporting to the Department Manager,
Planning/Organizing work activities in Maintenance section,
Develops and implements cost saving measures.
Formulates maintenance procedures and checklist for (5) units NIIGATA DIESEL ENGINEs coupled with NISHISHIBA SYNCHRONOUS GENERATORs And its Auxiliaries.
In-charge in the scheduling of daily, weekly, monthly and annual preventive maintenance of Diesel Power Plant And the following Auxiliaries below:
Training and Orientation of new recruits in both Operation & Maintenance Of Diesel Engine Power Plant and auxiliaries mentioned above,
In-charge in controlling spare parts And Tools inventories,
Planning, implementing and checking of work order-including coordination and consultation of Engine Maker,
Assist in the maintenance of 5 unit KOBELCO Air Compressors model AL-132 and two (2) unit HENSCHEL BOILERS model HKL-1800KL.
In-charge in the scheduling of daily, weekly, monthly and annual preventive maintenance of Diesel Power Plant And the following Auxiliaries below:
Fuel Oil Filters
Lubricating Oil Filters
Line Heaters (for Bunker Fuels)
Oil Purifiers
Oil Viscosity controllers
Cooling Towers And
Fans, Pumps and Motors
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
ROHM Fukuoka Company, LTD.
Oita Shi
Fukuoka, Japan
Maintenance Engineer
Semi Process (CSA/CBA Department)
Dec. 1991 – Sept. 1992 ( Carmona, Cavite, Phils.)
Jun. 1991 – Dec. 1991 ( Fukuoka, Oita, Japan )
Duties And Responsibilities
Research And Development on Mechanical enhancements And technical feasibility of new machines and equipment designs used for the production of micro-chip resistors.
Repair And Troubleshooting of electro pneumatic machines used for the production of micro-chip resistors,
Assist in the scheduling of preventive maintenance of electro-pneumatic machines used for the production of micro-chip resistors in CSA/CBA Department.
JOB EXPOSURES
Operation and Maintenance of two (2) unit NIIGATA DIESEL ENGINES model 12V32CLX, 5820 PS output, 4 cycle coupled with NISHISHIBA Generator with the following specifications:
4.1 Mega Watt (MW), 4160V, 80% power factor,
600 rpm, 3 phase.
Operation and Maintenance of three (3) unit NIIGATA DIESEL ENGINES model 6L32CLX, 2878 PS output, 4 cycle coupled with NISHISHIBA Generator with the following specifications:
2.0 Mega Watt, 4160V, 80% power factor, 600 rpm, 3 phase.
Operation and maintenance of five (5) unit KOBELCO screw type and oil free Compressors model AL 132 And two (2) unit EBARA HENSCHEL Boilers model HKL 1800KA.
Maintenance of Cooling Towers, electric motors and pumps, small compressors, Supply Fans, Exhaust Fans And Air Filters.
Maintenance of Lubricating Oil Purifiers and Filters, Fuel Oil Filters and Viscosity controllers.
Maintenance of Pneumatic machines used for the production Of Micro chip Resistors and Capacitors.
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
ARGONNE ENGINEERING AND CONSTRUCTION
San Juan City, Metro Manila
Philippines
Resident Engineer
March 1990 – April 1991
Duties And Responsibilities
Reporting to the PROJECT ENGINEER,
In-charged in checking and verifying and supervision of mechanical projects of the firm, ie. Plumbing and HVAC System.
Coordinates material deliveries, scheduling of subcontracted work and third party inspections.
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
SEBASTIAN MACHINE WORKS
Angeles City, Pampanga
Philippines
Asst. Maintenance Engineer ( On-The-Job Trainee )
Nov. 1989 – Feb. 1990
Duties And Responsibilities
Reporting to the MAINTENANCE ENGINEER.
Supervision in both preventive and scheduled maintenance of different types of Machines in a shop environment like lathe machines, Boring machines.
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
EDUCATION & AFFILIATION
1991 Graduated Bachelor Of Science In Mechanical
Engineering (BSME)
TARLAC STATE UNIVERSITY
Tarlac City, Pampanga
Philippines.
http://www.tsu.edu.ph/
1992 Passed the Licensure Examination For Mechanical
Engineers
Given by the:
PROFESSINAL REGULATION COMMISSION
Manila, Philippines
http://www.prc.gov.ph
lifetime Member:
PHILIPPINE SOCIETY OF MECHANICAL ENGINEERS
Manila, Philippines
http://www.psme.org.ph
2005 Undergraduate Auto Technician and Tune up Mechanic
North Valley Occupational Center
Mission Hills, CA
http://www.nvoc.org/
2009 Certified Nursing Assistant (CNA)
St. Jude Nursing School
Panorama City, CA
http://www.stjudenursingschool.com/
2009 Certified Home Health Aide (CHHA)
St. Jude Nursing School
Panorama City, CA
http://www.stjudenursingschool.com/
2014 Graduated Refrigeration & Aircon Technician:FUNDAMENTALS
North Valley Occupational Center
Mission Hills, CA
http://www.nvoc.org/
2014 Passed the EPA 608 Certification Examination
( Type I, Type II, Type III, & Universal)
Given by the
U.S.Environmental Protection Agency/ ESCO Institute
Los Angeles, CA
2015 Graduated Refrigeration & Aircond Technician: SERVICE
North Valley Occupational Center
Mission Hills, CA
http://www.nvoc.org/
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
TRAININGS And SEMINARS Attended
2014 Building Automation
Conducted by CINTAS Representatives and Engineers
2014 Asbestos Handling
Conducted by OPP Chief Engineer
2014 Seminar On Building Fire And Safety
Conducted by L.A.F.D. Staffs
1994 Productivity Enhancements through People
Conducted by Mr. Rodolfo M. Vitangcol.
1993 Seminars on Waste Water Treatments
Conducted by the Engineers of NIIGATA
ENGINEERING Co. LTD in Niigata, Japan.
1993 Seminars on Lubricants II
Conducted by the representative of SHELL Co. Philippines.
1992 Seminars on Fuel Oils and Lubricants
Conducted by representatives of Petron Philippines Corporation
1992 Specialized Trainings in the Operation And
Maintenance of 2.0 MegaWatt And 4.0 MegaWatt
NIIGATA DIESEL ENGINES
Conducted by the Engineers And Technicians of NIIGATA ENGINEERING Co. LTD., Niigata, Japan.
1992 Troubleshooting, Fault analysis, and overhauling of engine parts and Auxiliaries.
Conducted by the Engineers And Technician of NIIGATA ENGINEERING Co. LTD., Niigata, Japan.
1992 Operation and Familiarization of NISHISHIBA Generator set
Conducted by the representative of Nishishiba
Electric Co. Japan.
1992 Specialized trainings in Operation And Maintenance of KOBELCO Air Compressor model AL 132.
Conducted by ROHM Fukuoka Engineers.
1992 Specialized trainings in Operation And Maintenance of EBARA HENSCHEL Boiler model HKL 1800
Conducted by ROHM Fukuoka Engineers.
1991 Specialized Trainings in the Maintenance of
electro-pneumatic machines used for the production of microchip resistors
Conducted by the Engineers of ROHM Fukuoka
Fukuoka, Japan.
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
REFERENCE
Eustacio B. Lorenzo – General Maintenance
University Of Southern California
Housing Department
Los Angeles, CA
Engr. Alfred Villena - Retired Chief Engineer/BSME
691 W Linn Point
San Jacinto, CA 92582
Jim George - Therapist
Neuro Rehab Partners
6345 Balboa Blvd #120
Encino, CA 91316
Terry Kong – Proprietor
Ok Beauty Supply And Salon
9048 Sepulveda Blvd.
North Hills, CA 91343
DECLARATION
I do hereby declare that the information given above is true and correct to the best of my knowledge.
Joel D.Ramos
Contact this candidate