Maintenance Supervisor / Safety Officer

Jovel Fabic Pagente

Cardinal Village, Salitran III, Dasmariñas City, Cavite

Contact No.: 092*-***-****

E-mail Address: ***************@*******.***

Objective

To acquire a stable position to a reputable and dynamic organization where opportunities for growth prevails through trainings and allow me to harness my academic qualification to its full potential and my work experience.

Educational Background

Vocational: The Bethel Educational Support and Technology (THE BESTECH)

Accredited by TESDA

Building Wiring Installation NC-II

May 2011

Course: Bachelor of Science in Electrical Engineering

Tertiary: Technological Institute of the Philippines

1338 Arlegui St., Quiapo, Manila

October 2010

Secondary: Dasmariñas National High School Annex-G

San Isidro Labrador II

Dasmariñas City, Cavite

March 2001

Primary: Dasmariñas Elementary School

Dasmariñas City, Cavite

March 1996

Employment Background

J.F. RUBBER PHILIPPINES, INC.

“Maintenance Supervisor/Safety Officer”

Peoples Technology Complex

Special Economic Zone, Carmona, Cavite

March 28, 2015 – Present

“MAINTENANCE SUPERVISOR”

Supervises and assigns the work of maintenance employees

Supervise and discipline technical crews

Perform minor repairs and maintenance procedures on equipment’s/machines

Provide expert technical advice to solve technical problems

Ensure all engineering related procedures are documented

Ensure all staff follows the work planning and maintenance programs

Prepared detailed report on day to day of maintenance staff work activities

“SAFETY OFFICER”

Obtaining and renewing of government mandated permits

Conduct safety orientation to all employees annually

Conduct daily audit routine for PPE’s of all employees to ensures that all employees are wearing their prescribe PPE’s.

Conduct Fire & Earthquake Drill twice a year to ensure the awareness of all employees

Attend regular meeting of Safety and Fire Brigade Organization (SFBO) of PTC Carmona, Cavite

“IQA AUDITOR”

Evaluate production processes for compliance with quality requirements

Participate in quality audits

Identify processes, situations, etc., where organization is meeting requirements, as well as identify opportunities for improvement

Assist audit team in developing audit reports

Assist with follow-up audits, as required

STYRO-LITE MANUFACTURING CORP.

“Maintenance Supervisor”

New Cavite Industrial City

Governor’s Drive, General Trias, Cavite

Oct 27, 2014 – March 26, 2015

Interviews, trains, motivate, assigns and evaluates work, and recommends disciplinary action according to the company procedures.

Oversees all work in progress to ensure quality, timeliness and safety.

Schedules preventive maintenance on a regular schedule.

Skill in supervising, evaluating, training and motivating employees.

Skill in scheduling and prioritizing manpower and projects.

Skill in researching and gathering information related to vendors, contractors, equipment and supplies.

Skill in resolving day-to-day questions and problems regarding equipment, materials, methods, and procedures needed to complete projects.

AHAM CORPORATION

“Building & Facilities / Admin Engineer”

3/F American Home Bldg., Morato St.,

San Francisco Del Monte, Quezon City

July 14, 2014 – September 15, 2014

Ensures that Building, Properties & Facilities policies, procedures, systems and guidelines including the Employee Manual, are well-announced, understood thus strictly implemented and observed at all warehouses.

Conducts regular meetings/briefings with all security personnel so all Security and Safety are understood, reirerated and implemented.

Conducts performance review over all security personnel, evaluates hiring of new security personnel and recommends firing/replacing security personnel.

Primarily/generally responsible and accountable towards the safety and security of all employees, visitors, cars and VIP’s.

Ensures that all building premises, properties, facilities and personnel are safe and secured at all times from harm, theft, damage, fire and pilferages.

Oversees housekeeping functions and activities of all janitors/cleaners ensuring thus that all buildings/facilities/premises/rooms/common areas shall meet and maintain standards of cleanliness, hygiene and sanitation.

CLEAN ECHO TECHWIN INC.

“Technical Engineer / Pollution Control Officer / Safety Officer”

185 Mindanao Avenue Brgy. Maderan

GMA, Cavite

August 28, 2012 – January 18, 2014

“TECHNICAL ENGINEER”

Searching for new clients who might benefit from company services and maximizing client potential in designated regions.

Developing long-term relationships with clients through managing and interpreting their requirements

Preparing tenders, proposals and quotations.

Making technical presentations and demonstrating how our services will meet client needs

Travelling to visit potential clients

Preparing reports for our Department weekly Report

Persuading clients that are service will best satisfy their needs

“POLLUTION CONTROL OFFICER”

Monitor compliance to the requirements specified in the Environmental Compliance, Certificate and the commitments stipulated in the Environmental Management and Monitoring Plans and report the same in the Compliance Monitoring Report (CMR)

Ensures that all hazardous waste of the clients are properly treated

Ensure that transport vehicles are properly operated and maintained

Attend, as duly authorized representative of the establishment, technical conferences, hearings, and meetings to DENR EMB.

Coordinate regulatory programs, and activities with the city/provincial/municipal governments.

Initiate and intensify environmental management activities including awareness campaign within their organization.

“SAFETY OFFICER”

To develop, implement and monitor Board Occupational Health and Safety Policy, Programs, and Procedures.

To respond to employees’ Safety concerns

To increase health and safety awareness at all levels within the organization

To conduct, as necessary, the safety inspection of any Board facility

HGST a Western Digital Company

“Engineering Technician / Maintenance Technician”

SEPZ Laguna Techno Park

Biñan, Laguna

September 12, 2011 – August 31, 2012

Maintains and repairs mechanical equipment machines such as development

machines and coater machines.

Knowledge in maintenance repair and maintenance.

Skills in diagnosing problems in basic mechanical equipment.

Performs preventive maintenance on equipment.

Uses power and hand tools to perform repair and maintenance work.

Maintain files and records on equipment.

PAINTPLAS CORPORATION

“Engineering Staff”

Meridian Industrial Park

Maguyam, Silang, Cavite

February 11, 2011 – August 30, 2011

Responsible for the establishment of Document Control Procedure. The document control procedure shall include drawing schedule control procedure, document submittal and receipt procedure, secrecy observation procedure, document status indication procedure etc.

Keep track of all documents correspondences and transaction.

Maintain and update all document registers.

Control of issue and receipt of all documents and drawings.

Monitor and update any change and modification to the technical documents.

Highlight any deviation to Engineering manager for attention.

ROBERTS AIPMC

“Process Engineer / Data Analyst”

Canlubang Industrial Estate

Brgy. Pittland, Cabuyao, Laguna

March 16, 2010 – August 30, 2010

Responsible for the improvement in the production of leaf spring, safety of the operators, and improvement of the production area.

Knowledge in System development

Knowledge in software installation

Seminar’s/Training’s Attended

MDRRMO & MMDA

“ELSAROC (Earthquake and Landslide Search and Rescue Orientation Course)

Carmona Municipal Hall / Park

Carmona, Cavite

July 19 – 22, 2016

CHA Training Services Philippine Red Cross – Cavite Chapter

“Measurement System Analysis (MSA)” “Disaster Risk Reduction Orientation”

J.F. Rubber Philippines Peoples Technology Complex

PTC-SEZ Carmona, SEZ Carmona, Cavite

May 28, 206 May 26, 2016

CHA Training Services CHA Training Services

“Failure Mode and Effect Analysis (FMEA)” “Production Part Approval Process (PPAP)”

J.F. Rubber Philippines J.F. Rubber Philippines

PTC-SEZ Carmona, Cavite PTC-SEZ Carmona, Cavite

May 21, 2016 May 14, 2016

J.F. Rubber Philippines J.F. Rubber Philippines

“Core Tools (Statistical Process Control)” “ISO/TS 16949 Standard Awareness”

Peoples Technology Complex Peoples Technology Complex

SEZ - Carmona, Cavite SEZ - Carmona, Cavite

May 6, 2016 March 19, 2016

NFPA Enterprise Star Seiki Philippines Incorporated

“Fire Safety and Disaster Seminar” “Robot Interface”

Peoples Technology Complex @ Paintplas Corporation

SEZ - Carmona, Cavite Maguyam, Silang Cavite

March 16, 2016 June 24, 2011

Institute of Integrated Electrical Engineers Paintplas Corporation

“Project Management” “Document Control Center”

Technological Institute of the Philippines Meridian Industrial Park

1338 Arlegui St., Quiapo, Manila Maguyam, Silang Cavite

July 31, 2008 June 3, 2011

Synerquest Management Consultancy Services Inc.

“Basic Occupational Safety and Health (BOSH)”

University of the Philippines (UP)

Diliman, Quezon City

February 22, 2013

Certifications

Accredited Pollution Control Officer

DENR EMB Region IV

Nov. 27, 2012

Basic Occupational Safety and Health (BOSH)

UP Diliman, Quezon City

40-hour Training Course Feb. 18 – 22, 2013

Certificate of Attendance

Basic and Refresher Course for Pollution Control Officers

Oct. 24 – 27, 2012

Building Wiring Installations NC-II

The Bestech (TESDA)

May. 8, 2011

Membership to Organization

Pollution Control Officer

Pollution Control Association of the Philippines, Inc.

PCAPI-DENR-Region IV

Sports & Recreation Committee

Institute of Integrated Electrical Engineers (IIEE-SC)

TIP Manila

Personal Information

Age : 32

Date of Birth : September 25, 1983

Civil Status : Married

Citizenship : Filipino

Religion : Roman Catholic

Height : 163cm

Weight : 55 kgs.

Special Skills : Computer Technician

: Computer literate (MS Word, MS Excel, MS PowerPoint)

: Able to speak in both the English and Filipino.

: Able to work long hours.

: Able to work under pressure.

: Skilled in utilizing the computer for internet and research purposes.

: Can do computer trouble shooting, assemble and repairing.

: Fast learner and willing to be trained

: Driving Skills

: Knowledge in AutoCAD 2D& 3D

: Basic Repair/Cleaning of Equipment (Aircon, Refrigerator, Oven, Warmer)

Character References

Ms. Sherbe P. Mama

HRA Manager

J.F. Rubber Philippines,Inc.

PTC-SEZ Carmona, Cavite

Marc Llyod Mendoza

Maintenance Supervisor

Styro-lite Manufacturing Corp.

General Trias, Cavite

Engr. Joel Thomas Soleta

PEnvE/EVP

Clean Echo Techwin Inc.

Brgy. Maderan, GMA, Cavite

I hereby certified that the above information’s are true and correct and

will fit to your company requirements..

Contact this candidate