Mechanical Engineer
Resume:
Ryan C. Goode
***** ****** ****** ***** ******* IL, 60473 U.S. citizen 708-***-**** acvn4p@r.postjobfree.com
EDUCATION Chicago State University Bachelor of Engineering in Physics GPA 3.05/4.0 May 2015
TECHNICAL, & MECHANICAL ENGINEERING SKILLS January 2008 - Present
• Turning research ideas into technical plans, using computer aided design/modelling (CAD/CAM)
• Programs (NX-team center, ANSYS, INVENTOR, AUTOCAD 360, Set Based Design, ProE/CREO, Design Optimization)
• Data analysis and data acquisition of statistical tolerance analysis.
• opto-mechanical components and systems. • Data Analysis & Management. (Excel)
• GMP for tooling, molding, design and process. • Technical Communication & Networking.
• Diagnostic Experience. (Mechanical/Electrical) • Oversee maintenance programs and quality control.
• Budget Management, manufacturing. • Electrical testing DC/AC multi-meter/oscilloscope.
MECHANICAL EXPERIENCE (hands on with class A CDL) August 2000 - Present
•Engine rebuilding, testing, transmission gearing, clutch, and drive line specs.
• Heavy equipment hydraulic systems, vacuum pump rebuilds, and off-road vehicle design.
•Cooling systems, and A/C, electrical & mechanical tuning/calibrating, welding, brazing, fabricating.
•Carrying out surveys of mechanical systems and equipment to see if they're working properly.
• Overseeing maintenance programs and quality control managing and leading a project team of
technicians, designers and other engineering professionals.
References: Mike Kalajian 773-***-**** acvn4p@r.postjobfree.com
Dr.Austin Harton 708-***-**** acvn4p@r.postjobfree.com
Maurice Ball 630-***-**** acvn4p@r.postjobfree.com
Dr. Edmundo Garcia 773-***-**** acvn4p@r.postjobfree.com
William G. Jansma 630-***-**** acvn4p@r.postjobfree.com
Self-Employment: “Goode's Mechanical Services, and Drafting” Aug 2015 -- Current
Examination for repair to determine the extent of damage or malfunctions, and fabrications.
Engineering practices, and drafting qualities brought to life for customers.
RESEARCH & WORK EXPERIENCE
Fermilab, Batavia, IL. Post Graduate Summer REU (Pittman/Zwaska) June 2015 – Aug2015
Responsibilities/Results
Serving as a Designer for the Mechanical Drafting Department Accelerator Division – U.S High Powered R&D
•Simulation studies of spherical targets and thermal solutions, and created new prototype geometries using NX.
•Provided directions to manufacturing according to engineering and design intent.
•Calculated load distribution, torque, density, moments of inertia, stress and cross referenced with ANSYS output.
•Researched various manufacturing vendors to obtain pricing and manufacturability.
•Utilized McMaster-Carr, Mueller Industries, MDC and other websites to gather specifications on purchased parts
to be used in assembly design.
•Reverse engineered parts from obsolete drawings to provide solid models for analysis.
•Designed parts from visualization and measurements to accommodate design needs.
CERN, Switzerland, European Experience REU Thesis Research (Garcia/Harton) May 2014 – May 2015
Responsibilities/Results
At(CERN)Summer of 2014 our main goal was the validation of Simulations on the ALICE experiment during the long Shut down process. Each of the four experiments (ALICE) being one, along the Large Hadron Collider(LHC)is filled with many Detector systems.
•ALICE Experiment - Researched & calibrated two main electromagnetic detectors the EMCAL to the new DCAL
•Encrypting C++ code with Linux, Aliroot as program maintenance and simulations, and histograms.
•Attended meetings with lead nuclear engineers, conferences, and collaborated through closed group emails. collaborated with researchers at Laurence Livermore National Lab and CERN.
•optimizing the design parameters of the T0-Plus detector, such as the size and segmentation of the radiator or the number of modules and geometry of the array.
•Analyzed experimental data with reconstructed simulation. (Geant4)
•Installed fibrotic leads into photon detectors and tested for electrical connections 300 meters below ground level.
•Continued research, and simulations in the Physics Lab at CSU until graduation and senior thesis presentations.
Chicago State University PYSTEC Learning Assistant (Physics Dept. /15 hrs per wk) August 2013 – May 2014
• Assisted with prep of lectures, discussion selections and lab experiments. Managed course grading and evaluations.
•Taught a CPS high school physics class at Gary Comer College Prep under CS faculty supervisor.
Physics Lab Technician (Physics Dept. /15 hrs per wk) January 2013 – May 2015
•Managed setups, safety checks and maintenance of physics course laboratories.
Employment Gap Reason: Looking for a Career Sept 2012 – Dec 2012
American Eagle Steel LLC. Chicago Heights IL. Full time employment June 2010 – Aug 2012 Truck Driver/Mechanic
•Secure Loads with chains and binders sometimes tarps and straps.
•Inspect their trailer before and after the trip, and record any defects they find.
•Report serious mechanical problems and repair as needed to maintain efficiency.
•Offer mechanical advice to the company, and help with repairing machinery when economically possible.
•Deliver goods while operating a tractor-trailer truck, sometimes over intercity routes or spanning several states.
•Record amount and type of cargo being delivered, and take orders for new delivers.
•Report to a dispatcher any incidents encountered on the road, and plan routes using maps or satellite tracking.
Wes’s Service Inc. Calumet City IL. Full Time Employment April 2009 June 2010
Service Road Side Diesel Mechanic/Heavy Tows
Daily Inspections of equipment, and inventory of tools.
Emergency response requirements, and crash scene clean ups
Diagnosis of on board computer systems TeamViewer to perform custom tuning through the ECM/engine.
Jack's Specialized Services Inc. Country Club Hills IL. Full time employment Feb 2007 Feb 2009
Truck Driver for oversized loads/Diesel Mechanic
•Pre and Post trip inspections, and first light delivery, and long hour days.
•Adjust stretched trailer sizes for appropriate length, and highway regulations and DOT escorts.
•Secure extremely large loads of steel, and re-secure as proper judgement calls for.
•Work part time as a diesel mechanic under head mechanic, repaired turbo chargers, drive Lines, engines.
•Follow all OSHA Job site rules, and safety guild lines.
Brites Cartage South Holland IL.- Keldorn Trucking LLC. Lynwood IL. Aug 2000 Jan 2007
Lead Diesel Mechanic, Heavy Equipment Operator, Field Engineer
•Welding and Trailer fabrications, Vacuum Tank inspections, and Vacuum pump rebuilding.
•Diesel Engine, Hydraulic pump, and Transmission Rebuilds, Drive lines, Differentials.
•Some Civil Engineering field/survey work, grading, and following blueprints for building code, and job sites.
•Environmental subcontracting work out of town 1 month at a time for BP Oil Company gas spill clean ups.
Contact this candidate