Instrumentation & Control System Engineer

OBJECTIVE

I am looking for a good position in the field of instruments and automation in a prestigious company where previous skills and capabilities can be put to efficient use. I possess effective organizational skills and the ability to supervise a team and develop the final output.

SUMMARY OF SKILLS & EXPERIENCE

6+ years of experience as instrumentation and control system engineer in system design, detailed engineering, Erection, Commissioning & plant start-up in Co-gen Power Plant and Greenfield Onshore Project-LNG.

DCS: Invensys Wonderware Archestra, Foxboro I/A series DCS, Yokogawa Centum CS3000, ABB 800 XA.

PLC: Triconex Safety System (ESD), Siemens S7-200.

HMI: Fox view/Fox draw (10.x)

Communication Protocols: Modbus, Foundation Fieldbus,OPC and TSAA

Installation, commissioning, process automation, operation & maintenance of Power Plant & Water Treatment Plant.

Hands on experience in Woodward 505E & Bently Nevada.

PROFESSIONAL SPAN

Working as a “Instrumentation & Control System Engineer” in SCHNEIDER ELECTRIC (FORMER INVENSYS PROCESS SYSTEM), Singapore from April 2012 to Till Date.

ROLES & RESPONISBILITIES

Design- Designing Tag list Engineering, I/O assignment. Development of simple and complex loop based on the EPC document. Development of logic sequence for Vendor packages.

Testing- conduct FAT with customer and logic modification based on Customer /EPC requirements.

Documentation- Comprehensive documentation (I/O assignment, System, Marshalling, Network Cabinets, FAT/SAT Procedure and preparation of site report).

Project Management - Complete the Project within period, co-ordinate to achieve the goal.

Commissioning: System / marshalling panel testing with customer & EPC. Function level test on vendor packages with customer. Support Pre mechanical commissioning activity with EPC. Troubleshoot system level and networking issues. Establish communication with third party system.

Hardware and software modification at site according to the client requirement.

Troubleshooting & maintenance of DCS Controlled system Performing analysis of repetitive breakdowns occurring in process system

PROJECTS HANDLED

PROJECT : Clean Fuel Project - MAA

EPC : JGSK

END USER : Kuwait National Petroleum Corporation

Duration : April 2015 – Till Date

System Description: Integrated Control & Safety System – Foxboro Evo DCS System, FCP 280

Role & Responsibility:

Design a prototype for DCS System, Marshalling, Foundation Fieldbus, Workstation and Network cabinets.

Familiar with Shell Design Engineering Practice (DEP) Standards.

Involve in core team for FEED, Prototype Testing, System Design, Detailed Engineering, PRE FAT and FAT.

Develop Instrumentation Typical loop drawings.

Generate the System Design Documents like system architecture, system interconnection drawing, system cable schedule etc.

Review the customer’s comments and incorporate the required changes.

Hands on experience in Foundation Fieldbus.

I/O Allocation based on the JB list and EPC Input index.

Prepare Taglist based on Input index.

Conduct prototype Test with customer and modified based on EPC and Customer comments.

PROJECT : Barzan Onshore Project

EPC : JGC

END USER : Barzan Onshore Project

Duration : May 2013 – Apr 2015

System Description: Foxboro I/A DCS System–FCP270 & Triconex Safety System-MP3008

Role & Responsibility:

Design and modified documents for DCS System, Marshalling, Workstation and Network cabinets.

I/O Allocation based on the JB list and EPC Input index.

Prepare Taglist based on IO index.

Preparation of instrument index

Preparation of I/O list, cable schedule, MCC I/O list and alarm set points.

Successfully Completed FAT & SAT for Foxboro I/A DCS, TRICONEX ESD & FGS Hardware

System Test for Triconex (ESD & FGS) and Foxboro I/A DCS.

Knowledge of Safety system architecture with fail safe logic implementation and troubleshooting.

Extensive experience on Safety system configuration tools and application such as Tri station, Tri logger SOE etc.

3rd party interfacing communication with DCS, E.g. MCC, Triconex PLC, GE Mark VI.

Review and Modify TD as per Site instrument modification record (SIMR), RCS, and implemented in Hardware & Software.

Preparing JB details and DCS IO’s list update with latest RCS/SIMR revisions.

Hands on Experience in Safety Shutdown System (TRICONEX)

Conduct Loop check, Functional level Test with Customer/EPC

PROJECT : Group III Base Oil Production Facilities (GIII BOPF)

EPC : Hyundai (EPC).

END USER : Abu Dhabi Oil Refining Company (TAKREER)

System Description: Triconex Safety System-MP3008

Role & Responsibility:

Involved in the Testing team to complete FAT, development of simple loop typical templates.

Conduct FAT with customer and logic modification based on customer /EPC requirements.

Graphics development based on P& ID.

PREVIOUS ORGANISATION

Worked as an “APPLICATION ENGINEER” in AXCEND AUTOMATION & SOFTWARE SOLUTION, Bangalore from Dec 2011 to Mar 2012.

ROLES & RESPONISBILITIES

Installation and configuration of ABB 800 XA Hardware and software.

Setting up Domain network

Testing of ABB products.

Worked as an “Asst.Instrumentation Engineer” in Bannari Amman Groups – Sugar & Power Plant, Tamilnadu from July 2009 to Dec 2011.

ROLES & RESPONISBILITIES

Hands on experience in Yokogawa Centum CS3000.

Troubleshooting & maintenance of DCS Controlled system Performing analysis of repetitive breakdowns occurring in process system.

Documentation- Review & analysis of I & C Construction drawings like

Piping & Instrumentation Drawing

Field Instrument Data Sheets

I/O List, JB Schedule, cable & conduit schedule plan

Field Instruments - Hook up & Location plan diagram

Instrument Interconnection/wiring details and loop Diagram

Process Control Narrative & Interlock

Review of System, Marshalling and console cabinet layout drawing.

Installation-

Erection of Field Instruments as per P & ID and Hook up drawing

Installation of DCS System, Marshalling & console cabinet as per cabinet arrangement drawing.

Testing-

Conduct FAT with EPC and Main Automation Contractor.

Calibration of various field instruments like Pressure, level, temperature, flow transmitters, pH etc.

Commissioning:

System / marshalling panel testing with customer & Main Automation Contractor.

Function level test on vendor packages with customer.

Establish communication with third party system like Woodward 505E & Bentley Nevada.

Project Management - Complete the Project within period, co-ordinate to achieve the goal

PROJECTS HANDLED

PROJECT: 30 & 25MW Coal & Bagasse Based Thermal Power Plant in Thirukovilur & Thiruvanamalai, Tamilnadu.

EPC: Avant Grade

TEAM SIZE: 10

Roles & Responsibility: Assistant- Instrumentation Engineer.

Liaise with consultant and vendors for engineering related issues.

Reviewing instrumentation scope of work, drawings and executing the construction and maintenance activities in line with the project specification and standards.

Hands on Experience on Bentley Nevada 3500 & Woodward 505E Governor Panel

Installation & Commissioning of Steam & water analysing system.

Involved in installation, Calibration of instruments such as transmitters, pressure switches, level switches, control valves, motor operated valves (MOV).

Loop Check, Graphics Review and Function test

Hands on experience on Pre-Commissioning & Commissioning of Field instruments like Flow, Pressure, level, Temperature Transmitters & Control Valve

Installation, Commissioning & process automation of Boiler, Steam Turbine, and Water Treatment Plant.

Designing, Implementing and Commissioning of new control loops as per site requirements

Develop HMI as per process requirements.

Loop Check, Graphics Review and Function test.

Hands on experience in Installation, commissioning of various field instruments.

Responsible for Maintenance & trouble shooting of various field instruments like Temperature, draft and DP transmitters, Motorized damper Actuators, RTD, Thermocouple, Level Switches and level controllers.

Responsible for planning for preventive and predictive maintenance and spare parts and controlling cost of Maintenance.

EDUCATION

Bachelor of Engineering (Instrumentation & Control Engineering), Adhiyamaan Engineering College (Anna University)-2009/78.3%

HSC-Saru Matric Hr.Sec.School-Sathy / 2005/86%

ACHEIVEMENT

Received Appreciation certificate for Barzan Onshore Project given from Ras Gas Qatar and JGC.

PERSONAL DOSSIER

Permanent Address :6/43,60 Alingiyam West, Kurumandur via

. Gobi Taluk, Erode (DT), Tamil Nadu

Date of Birth : 7th March 1987

Nationality : Indian

Passport No :J1511989

Passport Validity :16/10/2021

Language Known : English, Tamil, Hindi.

I hereby declare that all the information provided above is true to the best of my knowledge.

Place:

Date:

(Selvakumar.A.V)

Contact this candidate