JOEL R. CATUBIG REE, ECE
Block * Lot ** La Bienvenida Subdivision
Minglanilla Cebu, Philippines 6046
Philippines: +639*********,+639*********
Email: **********@*****.***
Skype: jongkie67213
Passport No.: EC6577410
OBJECTIVE
Seek a challenging position that I can utilize and develop my skills, knowledge, experience and education with the opportunity for professional growth based on my merit and performance.
PROFILE
Having been experience working as an HSE Site Lead for Oil and Gas, Power Plant, Pipelines, Infrastructure, Buildings and Port Container Terminals projects. Experienced in monitoring construction activities pre commissioning, commissioning, start up, plant shutdown activities and live areas. Interpreting and evaluating compliance with safety standards; developing, recommending and implementing health and safety policies; reviewing job safety analysis and risk assessment for new and existing construction activities to ensure compliance with safety codes; coordinating with site engineers and construction team to discuss safety precautions; monitoring safety inspection programs; and developing health and safety educational programs for safety awareness.
Familiar with safety codes from various clients and constructor such as Qatar Petroleum, Qatargas, Chiyoda, Technip, Petrofac, Brunei LNG and Amec Foster Wheeler. Attended different safety training conducted by clients, accredited training organization & recipient of different safety recognitions.
QUALIFICATION
NEBOSH International General Certificate in Occupational Health and Safety with Distinction (Certificate # 00199913/531052)
Occupational Safety & Health Standards for Construction Safety (30 Hours) OSHA Reg. no. 30-600******
OSHA Construction Safety-10Hours Course (PMT500)
The Basic Life Support & First Aid Course from Qatar Red Crescent
A Registered Electrical Engineer Professional Regulation Commission (PRC) License No. 0030001
A Licensed Electronics & Communications Engineer Professional Regulation Commission (PRC) Lic. No. 27045
Good knowledge in OHSAS 18001
Trained Gas Tester and knowledgeable in different gas monitors such as Crowcon & BWtechnologies
Holder of Qatar Petroleum Permit to Work Certificate No. HSS-D Log#:6795
EDUCATIONAL BACKGROUND
UNIVERSITY OF SAN JOSE RECOLETOS- CEBU CITY, PHILIPPINES
Bachelor of Science in Electrical Engineering 2000
Bachelor of Science in Electronics & Communications Engineering 2001
WORK EXPERIENCE
STRABAG INTERNATIONAL (B) SDN BHD-BRUNEI HSE Officer (Site Lead)
Project : Brunei LNG Sdn Bhd.–Cogeneration Plant February 11, 2015-Dec. 23, 2015
Client : Brunei LNG SDN Bhd.
PMC : FOSTER WHEELER
SCOPE OF WORK
Construction of 2 Gas turbine generators, substation and fuel gas live interconnection.
Job Description:
Facilitate and participate in the development and implementation of HSE Plan.
Participate in the development of HSE performance measures, interpret result and coach /influence staff on how to improve Health and Safety.
Coordinate and participate in the development, analysis and delivery of HSE related training as required.
Provide support to the HSE Officer in the interpretation on the application HSE rules and regulation.
Provide coaching in their pre task talk and assist in their risk identification assessment, hazard analysis and job planning.
Review and provide support as required incident investigation
Monitor site condition and behaviors to identify the risk and provide site supervisor an input and recommendation to enhance safety performance.
Coordinate with Project Management Team audit recommendation and assist in corrective actions.
Maintain up to date knowledge to adherence of Foster Wheeler and Brunei LNG applicable safety rules and regulation
Attends in daily HSE site lead and weekly HSE staff meeting and cascading the message to HSE members.
Conducts site internal audit to identify if standard of Health and Safety is being implemented.
Attend job safety analysis review from Amec Foster Wheeler (PMT Team)
Consolidated Contractors Group (Offshore) S.A.L Acting SR. HSE Officer
Project : New Port Project 0026-Container Terminal and Infrastructure April 30, 2013- January 12, 2015
Client : Qatar Govt. represented by New Port Project Steering Committee
PMC : AECOM
Scope of Work
Construction of container terminal internal and external port road works networks including pump stations for portable and firefighting water supply, foul water collection and treatment system, treated sewage effluent(irrigation system), electrical, substation, telecommunications and associated networks designed by employer.
Job Descriptions:
Responsible for all HSE activities in site including buildings and infrastructure activities and all surrounding areas
Maintaining inspection program and report findings and recommendation to HSE deputy manager for operations.
Inspects work conditions and practices. Includes checking conditions of facilities, PMV equipment and tools, identifying safety hazards, reviewing work operations and practices and preparing reports in SH&E hazards with appropriate recommendations for corrective action.
Investigates accidents involving personal injury or property damage: Includes compiling information, discussing circumstances and causes of accidents with the job supervisor and preparing accidents reports with recommendation and prevention of similar future occurrences.
Provide job supervisors and workers with the fundamental safety training in accordance with the established procedures; includes on the use of safety equipment, ppe and explaining the safety regulations, discussing the accident prevention procedures.
Ensure that all firefighting equipment are serviceable and regularly inspected
Ensure that there is adequate supply on drinking water for site personnel and toilets are maintained properly
Consolidated Contractors Group (Offshore) S.A.L SAFETY OFFICER
Project : Gas Sweetening Facilities (AGRP) (Dukhan, Qatar) LIVE PLANT
Client : Qatar Petroleum Feb. 2011- April 29, 2013
MainCon : Petrofac International Limited
Scope of Work
Construction and commissioning of Acid Gas Removal and 14.5 KM pipeline in Dukhan.
Ensure the compliance of Qatar Petroleum safety standards and permit to work system are consistently and comprehensively deployed on site for work carried out inside live areas by constant monitoring, inspection, investigation and conducting onsite training and maintaining documentation, equipments and gas detector records adhered to QP HSE PLAN.
Investigate accidents and incidents. Documenting the injuries; detailed the events leading to, during, and after the accident; and recommendations to control hazards.
Identified, recommended, and implemented ergonomic changes to reduce health and safety hazards.
Participate in inspections and audits as per the HSE plan, monitor the frequency of these and follow up to ensure that allocated corrective measures are taken.
Disseminate any information on the learning points following incidents that occur in AGRP and in other companies.
Ensuring that the emergency equipment and emergency procedures are adequate to control an emergency situation. Conduct regular drills and exercises to test these and the emergency response of personnel.
Ensure that items of personal protective equipment issued to the employees are fit for purpose and properly maintained. Ensure the employees have received training in the wearing and use of the equipment.
Arrange for Safety Flashes/Alerts in the event of near misses/accidents and advise on the preventive measures needed to avoid reoccurrence.
Advise project and site personnel of the requirements of legislation, guidelines, code of practice, standards, JSA’s and method statements relevant to workplace
Maintained and performed weekly and monthly inspections of the fire fighting equipments and identified the need for routine maintenance.
Consolidated Contractors International Company S.A.L SAFETY OFFICER
Project : QCS LNG Onshore Expansion Project June 2009 - Feb. 2011
@ Ras Laffan Industrial City, Qatar
Client : QatarGas, ConocoPhillips & Shell (Project Completion)
MainCon : CHIYODA TECHNIP JOINT VENTURE (CTJV)
Consolidated Contractors International Company S.A.L SAFETY OFFICER
Project : Qatar Gas II LNG Onshore Facilities Project II Sept. 2007 - May 2009
@ Ras Laffan Ind’l. City, Qatar
Client : QatarGas and Exxon Mobil (Project Completion)
MainCon : CHIYODA TECHNIP JOINT VENTURE (CTJV)
Scope of work
QGX PROJECT
Construction and commissioning of two process trains with a capacity on 7.8 mtpa each, substations, instrument technical rooms, slug catcher and inlet facilities works executed around the projects were mechanical works, incorporating fabrication, installation of equipment, piping system, painting, civil works, fireproofing, hot and cold insulation, electrical and instrumentation.
QCS PROJECT
Construction and commissioning of 2 sulphur recovery units, 2 process trains, slug catcher, inlet facilities, effluent, utilities, substation and instrument technical rooms.
Provided proactive safety approached to world’s largest LNG projects with 4 trains having a production capacity of 7.8 million tonnes per annum (MTA) capacity each. Monitored and prevented potential workplace safety hazards through routine inspections; effective implementation of policies & procedures; and investigating and reporting accidents, incidents, unsafe actions & conditions recommends corrective action.
Participate weekly management and area leadership team walkthrough
Carry out atmospheric testing for confined spaces in sulphur recovery unit (QGXII project)
Undertake daily inspection tours in area of responsibility to ensure implementation of, and adherence to, the procedures set out in the HSE Site Plan, Group HSE Manual and any additional project specific requirements.
Take necessary action to rectify breaches of procedures or newly identified hazards, to ensure safe working conditions. Refers more complex issues to a more senior HSE authority.
Complete daily activity reports, bringing to attention actions taken on identified matters of concern and issues requiring resolution by higher authority.
Liaise with and advise construction representatives of all disciplines to ensure full understanding of and adherence to HSE standards.
Supervises activities and assesses performance to ensure complete understanding of HSE standards.
Participate in rotation programs and attends formal training to further develop HSE expertise in all areas of project activity.
Maintain records on non compliance reports.
Advise about prevention of injury to personnel and damage to plant and equipment.
Advise about further improvements in existing working methods.
Advise about suitability from a safety viewpoint of new and hired plant and equipment and validity of all appropriate test certificates.
Advise about suitability standards of protective clothing and equipment
Identify potential hazards on new tasks before work commences and take action to have it rectified
Advise about the site / work area safety organization and fire precautions required
Supervise and report the recording, analysis of information on injuries, damage and production loss, access accident trends and review overall safety performances.
Assist the training for all levels of employees to promote awareness of injury prevention and damage control.
SAFETY RECOGNITIONS
Certificate of Appreciation in his valuable contribution for QCS Project (QG 3 & 4)
Certificate of Appreciation for Achieving 10 million man hours Without LTI of QCS project (QG 3 & 4)
Certificate of Competence as a Best Safety Officer of the Month of June 2009 of QCS project (QG 3 & 4)
Certificate of Recognition for his contribution to Safety & Performance Of QGXII-Project
Certificate of Recognition for BEST IN NEAR MISS REPORT of the Month of October
Certificate for Safety Excellence for the Month of May 2008 From Chiyoda Technip JV (CTJV) for QGXII project
Recognition of the efforts & commitment for achieving 25 million Man hours without lost LTA for QGXII-project
SAFETY TRAININGS
Qatargas/JMJ Associates @Al Khor, Qatar
Incident Injury Free – Supervisor skills session
TOTAL SAFETY QATAR @Ras Laffan Industrial City, Qatar
Pre Mechanical Completion (PMC)/Simultaneous Operation (SIMOPS)
Introduction to Fire Safety Level II
ENERTECH Training Center @Doha, Qatar
Hydrogen Sulphide/Breathing Apparatus
CHIYODA TECHNIP JOINT VENTURE (CTJV)
Accident/Incident Reporting & Investigation Authorized Gas Tester Permit to Work (PTW)
Consolidated Contractors International Company S.A.L (IN HOUSE) @Ras Laffan Industrial City, Qatar
HSE Incident Investigators Training Course Defensive Driving Course Method Statement/Job Safety Analysis Height Safety Managing Heat illness Job Safety Task Observer (JSTO) LockOut/Tag Out (LOTO) Confined Space Entry Oil Spillage and Waste Management Hydrogen Sulphide (H2S) & Breathing Apparatus Abrasive Wheels & Portable Power Tools Behavior Safety, Hazard Identification, Shock, Manual Handling& 100% Tie Off
RODECH Training Services Link International Inc. @Cebu, Philippines
40 Hrs. Safety Officer Training Course for Construction, Petrochemical, Oil & Gas Industries
COMPREHENSIVE TRAINING PROGRAM FOR OIL & GAS Drilling
Drilling Technology
Hydrogen Sulphide (H2S) & SCBA instructions
Basic Rig Pass Safety Orientation IADC accreditation program # R432
Standard First Aid/Basic Life Support
Presidium Controls & Industrial Technologies Corporation Instrument Technician
3rd floor Dispo building AC Cortes Avenue Mandaue City, Phils. June 9, 2003 - Sept. 08, 2003 (OJT)
Tel. +63-32-318****/+63-32-344**** Sept. 08, 2003 – July 30, 2007
PROJECTS
Batch Process Automation Project
Kerry Foods and Ingredients, Cebu
Project Highlights:
Turnkey project expanding an existing food ingredient plant facility which constructed new batch process tank completed with PLC, instrumentation and automation equipment and control system using Yokogawa PLC and HMI Touch Screen as Operator Interface
DCWD Talomo Sump Control System & SCADA Project
Davao City Water District, Davao City, Philippines
Project Highlights:
Upgrading of conventional panel mounted controllers and recorders. Using Yokogawa Stardom Hybrid SCADA Controllers and HMI, new Yokogawa Smart transmitters for Sump Level and Flow Metering System with SCADA/PC HMI, interfacing with Telemecanique /Schneider Electric Variable Frequency Drives and Soft starters
PERSONAL BACKGROUND
Born on August 22, 1978 Cebu City, Philippines. Proactive, self-motivated, hardworking and willing to work under pressure. Computer literate with knowledge in Microsoft applications, Adobe Photoshop CS2, computer aided design and electrical installation & troubleshooting.
Character References
Michael Hewitt
HSSE Manager
Strabag International Company
Email: *******.******@*******.**
Mobile # +673-******* (Brunei Darussalam)
Arman Espinosa
HSE Engineer
National Petroleum Construction Company
Email: *****.********@*****.***
Mobile # +971-********* (UAE)
Mostafa Khalil
Deputy HSE Manager
Petrofac International Limited
Email: *******.******@********.***
Mobile # +201*********