Engineer Control
Resume:
CAREER PRECISE
My career has been built upon experience gained in the process industries: oil & gas (onshore and offshore), petro-chemical and power-generation. The primary role has been Engineering, Construction, Maintenance and Commissioning for onshore and offshore oil and gas facilities and multi-discipline project management. I have around 8 years of Experience (2 years in Indian and 6 years in Middle East).
MAJOR PROJECTS
Upgrading Surface Facility at Well Head Platform Offshore (ZADCO)
Gas Flow metering and SCADA (QATAR PETROLEUM)
Control system Upgrade for Gas turbine (Saudi Electrical Company)
Flow metering (Saudi Electrical Company)
Refinery Tank Farm Area, Lift Station (SAUDI ARAMCO)
DCS Upgrade (SWCC),
Gas turbine Control system upgrades & Custody Transfer Flow metering (SEC)
CERTIFICATION : BOSET, ISA-CIAT (PLC, SCADA, HMI), INDUSTRIAL SAFETY, DCS (ABB 800M, HONEYWELL).
SOFTWARE : AUTO CAD, MS PROJECT, HMI.
EXPERIENCE (MAY 2013 TO DEC 2015)
CCTC Engineers & Contractors, ABU DHABI
I&C Engineer.
PROJECT INVOLVED: Upgrading Surface Facility at Well Head Platform & Center Processing Platform Offshore (ZADCO)
Responsibilities
Responsible for generating Detail Engineering document related to Instrumentation and Control system
Oversee all Instrumentation, Control system, F&G system and Electrical equipments during construction.
Participate in HAZOP, Witnessing FAT.
Liaising and coordinating with other disciplines to ensure deliverables are produced to meet deadlines.
Receives Project documentation and understands scope of work related to my discipline.
Report to Commissioning TEAM LEADER as per project Organization chart.
Lead a team to undertake commissioning activities.
Interfaces with other disciplines to ensure integration of activities.
Preparation of method statements, procedures, Check Sheets.
Reports to work process, bringing to notice potential problems or delays and recommends technical database.
Preparation of RED mark ups as per site installation and get approved by Client representatives for As-Built.
To preparation database for pre commissioning status index and commissioning technical database.
Plan, Monitor and assist in vendor activities as required.
Perform inter-discipline checks.
Compliance in accordance with HSE Standard.
Generation of SAT Related documents, commissioning completion dossiers
Commissioning of Hydraulic Well head Control panel, DCS (S7), ESD (S7), F&G system (S7),HVAC, VFD, UPS & AC and DC Distribution board, Novec, Deluge, Telecom and CCTV system, Open drain pump, close drain pump, Chemical Injection Skid, Switch gear.
FROM AUG 2011 to APRIL 2013
NEW ERA CONTROL – QATAR
I&C ENGINEER
Site survey and Field Engineering.
Preparing, I/O list, Loop drawings, Instrument Index, Instrument data Sheet, Hook-up diagrams, Preparing Instrument Blocks Diagrams, Junction Box Interconnect drawings, Power distribution drawings, Instrument Location Plan, Cable Schedule, Purchase Order, Project plan, SAT related documents
Installation/Pre-commissioning/Commissioning of field instruments Like Flow meter (Ultra sonic), Gas Analyzers, Doppler flow meter DMF 5.0, Pressure, Temperature, Level Instruments, Control valve, Actuator, Flame detector, toxic detector, Gas detector etc.
Installation/Pre-commissioning/Commissioning of Control system Like (PLC, SCADA, Fire & Gas System).
Installation, testing, calibration and commissioning of Fire and Gas sensor.
Loop testing and commissioning of various control loop
Familiar with Fire & Gas system (HIMA), Flow Computer (ELSTER), SCADA system, HVAC
PROJECT INVOLVED
Pipe Line Instruments, Gas Flow metering, F&G and SCADA system - Qatar Petroleum
FROM MARCH 2009 to APRIL 2011
SAUDI ARABIAN ENGINEERING COMPANY (REZAYAT GROUP OF COMPANIES)
INSTRUMENTATION ENGINEER
Duties Involved
Site survey and field Engineering
Installation/ Commissioning of field instruments Like Flow meter, Pressure Tx, Temperature Tx, Level Tx, Control valve, Actuator etc.
Installation/ Commissioning of Control system Like (PLC, SCADA, DCS).
To review the P&ID's, PFD and other related Engineering drawings and provide guidance.
Loop testing and commissioning of various control loop
Prepare execution plan for I&C works, from installation till commissioning and start up.
Calibration of Flow meters (metering system, Small Volume prover) and other field instruments.
Conversant with IBD, JB & Marshalling Interconnection, Hook-up diagrams, Control logic diagram, Instrument Location Plan, Cable, Conduit & Tray Routing Diagram, C & E drawings etc.
Cost Estimation and Proposal for Control system, Electrical and Instrumentation projects.
Duties Involved
FROM MARCH 2007 TO MARCH 2009
Manali Petrochemical limited, Chennai, India
Instrumentation Engineer
Preparation of Instrument Data Sheets, Technical Procurement Specification, Instrument Index, Input/Output List, Cable Schedule, Scope of Works., BOM.
Budgetary offers and obtaining quotes from vendors and Cost estimation for turnkey projects
Installation, Calibration and Commissioning of instruments used for flow, temperature, pressure & level measurements and control system.
Was involved in the removal and maintenance of the existing defective instruments and repairing, calibration, installation and commissioning
Loop checking internally and from system to field and doing modification Job of various Industrial Instruments
Planning, supervising and execution of plant shut down jobs.
Assistance in maintenance and supervision of works during shut down period.
P& I diagram review and correction as per field requirement.
Assist with the definition of the testing and commissioning scope, planning/scheduling information and man-hour estimates to complete the instrumentation scope of works.
Worked with P&I drawings, Hookup Drawing, Cable Tray Layout, Cable Routing diagram Preparation of As Built Drawings
Working in SAP System
Calibration, Instrumentation piping of all Field Instruments such as Gauges, Thermocouples, RTD’s, Flow meters, Solenoids, Transmitters, Fire detectors, Flame Scanners, Limit Switches .
Projects Involved:
Erection and commissioning of CATEX plant in MPL-Plant-I.
Preparation of I/O list and Installation of all Instruments.
P& I diagram review and correction as per field requirement
Hookup drawings and loop checking.
Preparation of Instrument Data Sheets, Technical Procurement Specification
All Trips and interlock checking.
DDCS( Distributed Digital Control System)-
Creating new open/close loops
logic building
Graphic page and control group assigning
Loop checking and commissioning of instruments in DCS.
Contact this candidate