Machine Operator Supervisor
Resume:
Allen Flemin Tucker
**** ****** ** ** ****: 256-***-****
Mount Hope, AL 35651 Email: acvd7x@r.postjobfree.com
Education
Calhoun Community College- Machine Tool Technology, 1998-2001
**** ****way 31 North
Tanner, AL 35671
Mount Hope High School- General Diploma, 1993–1997
8455 County Road 23
Mt Hope, AL 35651
Work experience
I have a combined 14 yrs experience in machining and tool making. I have made
several moves to better myself and in doing so have had the opportunity to work with many
different types of material and machines broadening my knowledge as a machinist.
BMC Metalworks - CNC Machinist 8/15 - Present
Columbia, Tennessee 38401
Supervisor: Darren Moore
● Setup and run CNC mills
● Make adjustments to the offsets and program as need to produce
parts that meet required specifications.
● Use several different types of measuring instruments to verify parts are
in tolerance.
Tri State Hydraulics- Level III Machinist, 4/15-8/15
3158 Hwy 20 West Building #5 Decatur, AL 35601
Supervisor: Jerret Hall
Complete shop routers as assigned using blueprint or sample pieces supplied.
Use various measuring instruments to check completed work before
assembly. Keep work area neat and clean to promote safety in the shop area.
AAR Aerostructures and Interiors – Quality Assurance Inspector 10/13 – 4/15
140 Sparkman Dr. Huntsville, AL 35805
Supervisor: Steve Morvay: 256-***-****
Ray Williams: 256-***-****
As quality inspector I keep very detailed reports on every shop pack completed
I use multiple instruments to check parts to ensure they meet customer specifications
I’m also in the process of becoming a CMM operator / programmer
AAR Precision Systems – Machinist, CNC Operator 6/12- 6/13
140 Sparkman Dr. Huntsville, AL 35805
Supervisor: Larry Bailey 256-***-****
Joe Pierce 256-***-****
My Duties include setting up machines using various fixtures. Verifying fixtures are in good working order.
Making adjustment to programs as needed for optimum performance.
Set tools and tool length offsets. Inspect machined parts using precision interments such as micrometers, calipers, ultra sonic gage, etc
I’m also able to read and understand blueprint drawings.
I work with very tight tolerances +/.0002
I also work with different types of metal. Including high speed aluminum, titanium, prehardend materials.
Must strictly follow our “shop packs” and use T stamp to confirm our work
I also worked on a TPM crew that disassembled several machines went though identified worn or broke parts and replaced parts with new components to make machines perform better and more reliable
Wise/ABB - Roll grinder/Machinist, 10/07-06/12
Muscle Shoals, AL 35661
Human Resources: Charlie Wright and Bobby King 256-***-****
Supervisor: Jeff Hill
I grind rolls to the specifications defined in the Manufacturing Technology Manual (MTM), inspect outgoing and incoming rolls for defects from chroming, and communicate with mill supervisors of any possible improvements or changes that need to be made to the rolls.
I also perform preventative maintenance on each roll grinding machine and repair any part failure that may occur during normal use.
Independently plan, schedule, and execute according to the demands of the mill.
I also serve on the safety committee.
Consolidated Tool Inc.-Machinist, 03/07-10/07
333 Washington Avenue Muscle Shoals, AL 35661
Supervisor: Doug Bumpas 256-***-****
I apply my knowledge of programming in conjunction with blueprints to run a CNC lathe and mill while holding very tight tolerances.
General Southern Industries- Machinist, 09/06-03/07
P.O. Box 179 Hwy 243, Industrial Park
Russellville, AL 35653
Supervisor: Jeff Martin
I operate various CNC machinery according to the blueprints I am assigned also performing my own quality control on parts finished.
Nichols Aluminum- Machinist, 05/06-07/06
2001 Highway 20 Decatur, AL 35601
Supervisor: Bubba Montgomery 256-***-****
I refurbished work rolls on a roll grinder holding a .001 tolerance, and I produced a 16-18 microfinish on the rolls. I also sharpened slitter knives and leveler blades. Lastly, I bored out couplings to go on gearbox shafts by measuring shaft and putting press on the couplings
B and B Machine- Machinist, 02/05-04/06
70 Army Street Courtland, AL 35618
Supervisor/Owner: Michael Bond
I worked with blueprints and held print specifications on both manual mill and manual
lathe with a tolerance of +/- .001. I bored several coupling to be pressed onto shafts with
familiar bearing fits and angles on a mill. I used a 90 degree attachment on the mills. I amfamiliar with rotary tables, and I feel proficient with all measuring tools.
Weyerhaeuser- Machine Operator, 01/04-01/05
708 Hwy 43 South Tuscumbia, AL 35674
Supervisor: Jeremy Taylor
256-***-**** Ext. 7035
I performed set ups and ran CNC routers. I also changed offsets when called for in a program and calibrated machine tools. Routine maintenance on machines was also necessary.
OH! Bryans Family Steak House - Cook 06/01-12/03
2424 County Road 460 Mt. Hope, AL 35651
Owner: Kevin Gillespie 256-***-****
Prepare food to order
Receive, sort, and store fresh and frozen food and produce
Routine cleaning and maintenance to kitchen equipment as needed
Denham Machine and Tool- Machinist/Shift lead, 10/99 – 5/01
6031 County Road 434 Trinity, AL 35673
Owner: Thomas Denham
I worked on a manual mill with blueprints holding specified tolerances on prints. I also worked on a toolmakers lathe, ran a surface grinder with fixtures while holding tight tolerances, and made sure the CNC mills and lathe were set up and running properly.
Qualified Machine Certifications/Skills
Manual mill Manual lathe
Roll grinders Manual boring mill
Blanchard grinder Surface Grinder
CNC boring mill CNC lathe
CNC mill Centroid Controls
Master CAM Mazak quick turn
CNC router Cincinnati.
KPM machine controls (programming) Mazatrol
OSHA certification OSHA 10 certification
Certification in rigging Man lift
Certified forklift operator
Certified overhead crane operator
References
Brandon Borden-machine operator at 3M
734 AL Highway 24 Mount Hope, AL 35651
Matt Holland- pipe fitter with outside contractor
217 Tucker Road
Jasper, AL 35504
Marcus Stevenson- mill operator
Trinity, AL
Contact this candidate