Resume

Sign in

Commissioning, Maintenance

Location:
Ufa, Republic of Bashkortostan, Russian Federation
Salary:
400€ net daily rate
Posted:
October 31, 2019

Contact this candidate

Resume:

Vladimir Aleksandrovich Lukianov

Contact information

Mob +7-917-**-**-*** (WhatsApp, Viber)

Home +7-347-***-**-**

E-mail: acvbrp@r.postjobfree.com

Skype: kolovrat-val, icq: 331897700

Birth date and place 11 05 1977, Bashkiria, Ufa

The place of residence,

citizenship

450077, Bashkiria, Ufa, Lenin st., 51-28

Russian Federation

Marital status,

children

married, no children

Education/Courses/Certificates

Type The Name The period

The Masters (honors degree)

The Ufa State Aviation Technical

University

1994-1999 (sp. “Robots and robotics

systems”)

BOSIET/HUET + CA-EBS OPITO approved provider Training centre of Federal budget institution

of Marine rescue service of

Rosmorrechflot

2019. Certificate is valid till

29.10.2023

Experience

2019-present

Yamal LNG

Senior Commissioning Instrument and Controls Engineer Commissioning of Instrumentation and ICSS at the Yamal LNG project Commissioning of Instrumentation and ICSS at the Yamal LNG Project (Units, well pads, Local Control Equipment rooms, Module Equipment rooms, buildings and facilities) of 4th Train, Remote Well pads and auxiliary areas: Preparation of Instrument and ICS systems for Site acceptance tests, functional tests&loop checks/tests in accordance to Yamal LNG Commissioning Procedure,. Population of subsystems components in DB. Control of Construction and QC completion. Direct Managing of commissioning activities organization and implementation (Instrument, ICSS and Package Units control systems Site Acceptance tests, Instrument Loop tests and ICSS Functional tests). Vendors and Subcontractors As-Built documentation review and validation as a CPY rep., PCOM/COM progress control.

2019-2019

TechnipFMC (TechnipRUS)

Commissioning Controls and Instrument Supervisor

Precommissioning/Commissioning of Instrumentation and ICSS support at the Zapsib-2 polyethylene facility (LLDPE/HDPE and HDPE units) of the Zapsibneftekhim petrochemical plant

(SIBUR, Tobolsk)

General support to SIBUR’s (Client’s) PCC and Construction teams in Commissioning/Precommissioning of ICSS/UCP, Instrumentation at the TechnipFMC Zapsib-2 PE Project (Control Equipment rooms(Remote Instrument enclosures), Module Equipment rooms) at LLDPE/HDPE, HDPE units of PE facility, Utilities and Units areas: Preparation of Instrument and ICS systems for Site acceptance tests, functional tests&loop checks/tests. Control of Construction and QC completion. Joint co-ordination activities with CPY’s PCC team, TechnipFMC Field engineering, materials control and EasyPlant teams, Vendors. PCOM/COM progress control via EasyPlant.

2016-2019

South Tambey LNG (TechnipFMC)

Commissioning I&ICSS Engineer

Commissioning of Instrumentation and ICSS at the Yamal LNG Project Commissioning of ICSS/UCP at the Yamal LNG Project (Control Equipment rooms, Module Equipment rooms) at Trains (1,2,3), Utilities and Jetty areas: Preparation of Instrument and ICS systems for Site acceptance tests, functional tests&loop checks/tests as per OPERCOM. Population of subsystems components in EasyPlant. Control of Construction and QC completion. Direct commissioning activities organization and implementation (ICSS and Package Units control systems Site Acceptance tests, Instrument Loop tests and ICSS Functional tests). PCOM/COM dossiers reviewing and preparation, PCOM/COM progress control. 2014-2016

Total E&P Russie

Commissioning Team Leader/CSL

Commissioning at the Kharyaga oil field

Commissioning on the remote pads at the “Kharyaga” deposit, Phase 3 project – Total E&P Russia, Nenetz Autonomous area, Arkhangelsk region according Total OPERCOM procedure. Piping&Mechanical, E&I, chemical injection package, HVAC systems, fire & gas systems, PAGA, wellhead control panels, heat-tracing systems, leak tests, pump equipment. Full range of Commissioning Site Leader functions and responsibilities, Managing, personal involvement in actual commissioning activities, technical and organizational guidance at the remote pads (EP-1, NP-1, EP-2): managing & direct personal participation in commissioning

(Instrumentation, Piping & Mechanical, Electrical disciplines – functional tests, checking, calibration etc.), General and Operational test procedures preparation, preparing information for issuance of PreCOM and COM dossiers in ICAPS(export items, basic functions, sub-systems battery limits determining, filling COM dossiers, eliminating and checking punch lists closure, using ICAPS software, direct participation with ICAPS administrators in check, test, FT lists modification in accordance with project and Russian industrial rules and regulations specifics, supervising contractors in building and assembly works and commissioning, work organization of commissioning group, interaction with construction departments during RFC preparation, Total – E&P Russia management, preparation and keeping planning, reporting documentation, permits-to- work checking, preparing and submitting, contractors auditing in accordance with Total HSE policy.

Interaction with O&M departments during handover and start-up activities. Logistic issues solution: materials and equipment preparation for the Commissioning activities. 2013-2014

Dietsmann Technologies

Commissioning Team Leader (till 01.12.2013 – Commissioning Instrument Leader) Commissioning at the Kharyaga oil field

Commissioning on the remote pad at the “Kharyaga” deposit, Phase 3 project– Total E&P Russia, Nenetz Autonomous area, Arkhangelsk region

Instrumentation, chemical injection package, HVAC system, fire & gas system, PAGA, wellhead control panels, heat-tracing systems, pump equipment. Managing, Direct personal execution of commissioning, technical and organizational guidance at the remote pads (EP-1, NP-1, EP-2): direct personal participation in commissioning

(Instrumentation, Piping, Electrical disciplines – functional tests, leak/passing tests, checking, calibration etc.), preparing information for issuing PreCOM and COM dossiers in ICAPS(export items, basic functions, sub-systems limits preparation), filling COM dossiers, eliminating and checking punch lists closure, using ICAPS software, direct participation with ICAPS administrators in check, test, FT lists modification in accordance with project and Russian industrial rules and regulations specifics, filling COM dossiers, supervising contractors in construction, assembly activities and commissioning, work organization of commissioning group, interaction with construction departments during RFC preparation, Total – E&P Russia, keeping reporting documentation, permits-to-work checking, preparing and submitting, contractors auditing in accordance with Total HSE policy.

Interaction with O&M departments during transmittal and start-up activities. Logistic issues solution: materials and equipment preparation for the Commissioning activities. 2012-2013

Highland Gold Mining/Russdragmet, Ltd (Belaya Gora, Ltd) The Chief of Automation and Commissioning Dept.

PCS and instrumentation of MPC

The organization and control of work of Department in the field of building, commissioning, maintenance service and repair of I&C systems of MPC at "Belaya Gora" deposit. Direct personal participation and supervising the building and assembly works, commissioning, automated system maintenance, automated accounting energy control system, instrumentation, relay protection automation of a gold-extracting factory (automated control system PCS based on GE VersaMax, as well as local automated systems:

Ball mills - local PCS, “EKRA” Soft start system, grinding machine (S7-300), conveyor belts, concentrators Knelson (Simatic S7-300, 200), pulp pump automated system by Dobersek (based on Simatic S-300), relay protection microprocessor devices Sepam 20, 40, 80 series, boiler-house PCS

(based on S7-1200), intake pumping (made by “OZNA”), SBSCH-250 blasthole drilling rig, Instrumentation (Endress Hauser, Danfoss, WIKA, Rosemount, Siemens etc.) Keeping normative documents, necessary equipment and materials organization of the supply

(design and maintenance of applications in 1C

Organization of production control, preparation of technical standards (operating instructions, instructions for labor protection, maintenance schedule, methodology for execution Automation and commissioning department guidance at the gold-bearing deposit "Belaya Gora",

(Khabarovsk Krai, Nikolaevsky district)

2010-2012

LUKOIL (LUKOIL-Inform Ltd.)

The I&C Engineer of 2nd grade

Gas Turbine Power Station at Vatyeganskoe oil-field. PCS (Siemens S7-300, S7-400-based (I/O stations ET-200, ET200-M, communication controllers)

(PCS of Power supply, Gas Preparing, Natural Gas Compressor station, Boiler-house, Diesel power station, Fire Control & Fighting, Gas Analyzing, Monitoring of PSP (Power Station Protection), Switch Timing Chains, Web-monitoring, Fire fighting pumping station), PCS Instrumentation (fire and gas analyzers, flow meters, level gauges, pressure sensors, TS- elements), control systems for block valves, compressors, pumps, switchers etc. Automated systems at the marketable gas preparation units (control, shutoff valves, check valves, gas separators, circulating pumps, pressure control system, temperature, flow, air condition control, separator level control, condensate trap and drain tanks. Boiler-house automated system:

pressure control system, flow, temperature at the technologic, heating, circulating circuits, chemical water treatment, boiler unit automated system, as well as circulating pumps, control and check valves

Diesel engine power plant:

pressure control system, temperature, flow, air condition control. Fire pump house automated systems (control pressure system, temperature, water flow, fire tanks level)

Circulating pumps, boost pumps, blowing well pumps, booster station, compressors, temperature pressure, flow, gas separator level and tank, air condition control. Fire extinguishing automatic systems:

Carbon dioxide stations, fire alarm (gas detectors, flame detectors, manual fire alarm detectors. Automated system gas turbine power station ( fire extinguishing fire-alarm automated system, air conditioning control, pressure control system, the level of the heating unit, the central oil- feeding unit, drain tanks)

“Povkh-Lokasovo” pipeline tie-in (automation and control of temperature, pressure, flow, gas separator, control and shutoff valves), access control systems for gas turbine power plant

(checkpoint and CCTV at the gas turbine power plant of Vatyeganskoye oil-field. Carried out maintenance service (SL-1,2,3), procedural operations (SL-1,2,3), carried out, controlled the building, starting-up, commissioning and adjustment operations of PCS on GTPS

“Vatyogan”. Supervised a team, controlled HSE, conducted the accounting documentation, correspondence, worked with the Customer and contractors (“RusGazEngineering”,”INCOM- System”).

2008-2010 Bashneftegeofisika, JSC, the directorate of geophysical researches in Ufa The engineer of geophysics-technological expedition Geo- technological researches (Vankorsky deposit), technological measurements (Bashkortostan, Orenburg oblast)

Conducted the geo-technological researches – controlled drilling parameters (weight on a hook, loading on a bit, pressure, drilling mud flow, BHA as for a table, drilling depth, gas chromatographic analysis.

Geo-chemical analysis of drilling slimes, gas, etc.), controlled HSE, conducted the accounting documentation, correspondence, worked with the Customer, supervised over brigade, trained newly employed engineers.

2007 SIBUR (SiburTyumenGaz, JSC)

The chief specialist of PCS Dept.

System of linear telemechanics of under construction pipeline Controlled and conducted the building, starting-up, commissioning and adjustment works, conducted operative control and coordination works of installation, adjustment, maintenance service; inducted the System into trial maintenance (block-boxes of PCS near block valve stations based on PLC Moscad, “Motorola”, Instrumentation of PCS (pressure sensors, gas analyzers, ts- elements,”pigs” detectors etc), control systems of block valves). Operatively controlled and coordinated the installation, adjustment, commissioning, maintenance works (registration of plans, schedules, controlled the registration of permits-to-work, directly controlled and supervised the works conducted by contractors and subcontractors), worked with contractors (NPO "Vira-realtime") – controlled and vised certificates of the executed works, transfers of the equipment to installation (forms KS-2,3, OS-15); controlled arrived equipment, audited the available equipment.

2002-2007 Uraltransnefteprodukt, JSC

The Chief of Telemechanics Sector, PCS Directorate, Systems of station, linear telemechanics, the reservoir parks control systems, automatics of petropumping stations systems, pressure automatic control systems, pipelines leaks monitoring system

Controlled and conducted the construction, starting-up,commissioning and maintenance, Operational control and coordination works of installation, adjustment, maintenance service; Installation, commissioning and maintenance. Control and coordination

(block-boxes of PCS near block valve stations based on PLC ELSI-TM, PCS of pumping stations, reservoir parks, ACP based on PLC Modicon, Instrumentation of PCS (pressure sensors, gas analyzers, temperature trasmitters,”pigs” detectors, vibration transmitters, etc), control systems of block valves).

Operatively controlled and coordinated the installation, adjustment, commissioning, maintenance works (registration of plans, schedules, controlled the registration of permits-to-work, directly controlled and supervised the works conducted by contractors and subcontractors), worked with contractors (“EleSy”, Ltd., “TerSy-M”, JSC, “Emicon”, JSC) - controlled and vised certificates of the executed works, transfers of the equipment to installation (forms KS-2,3, OS-15); Incoming control of delivered equipment, audited the available equipment. Coordinated works of maintenance of uninterrupted and continuous operation of aforementioned systems, participated in drawing up and execution of the program of investments (proved necessity of reconstruction and modernization of objects PCS, made technical schedules, primary specifications, design assignments, supervised an expenditure of budgetary funds regarding the program of investments into automation and telemechanization), supervised predesign, design works, participated in production tests of PCS.

2000-2002 Pacific fleet Naval Aviation (Russian Navy) Service group senior technician (senior lieutenant (1st lt.) Instrument, oxygen and photographic equipment,

Airplane TU-22 M3 objective control systems

Airplane stand-to maintenance

1999-2000 Uraltransnefteprodukt, JSC

The I&C Engineer of 2nd grade

Systems of station, linear telemechanics.

Automated systems

Commissioning, maintenance and repairing

Additional Information

Computer skills ICAPS, EasyPlant, PRODOM, EDMS, MS-Office (Word, Excel, Access, Visio, PowerPoint), ICAPS, AutoCAD, Step 7, WinCC

Language English – fluent

Personal information I am sociable, team player, interested in modern technologies, ready for business trips, and working on a rotational basis

OPERCOM, Opercom™, ICAPS, ICAPS™, EasyPlant, Commissioning, Commissioning management, pre-commissioning, precommissioning, commissioning, instruments, instrumentation, E&I, Electrical and Instrument, ICSS, PCS, PSD, ESD, Shutdown logic, Cause and Effect, C&E, P&ID, P & ID, Site Acceptance tests, Factory acceptance tests, Maintenance, planning, commissioning planning, procedures, operational tests procedures, OTP, General specifications, Total E&P, TOTAL, TECHNIP, TECHNIP FMC, Loop tests, loop checks, functional tests, functional checks, leak tests, leak checks, HVAC, ventilation, piping, LV/MV, motors, cubicals, SIMATIC, YOKOGAWA, Schneider, Rosemount, F&G, F & G, Fire and gas, Simacode, Siprotec, Sinamics, Simatic, Step 7, ProSafe, Centum, Versa Max, Minig, Gold minig, ball mills, soft start systems, VSD, VFD, VSDS, VNet IP, HSE, Safety, Critical, Golden Rules, Industrial Safety, As Built, As commissioned, Punch lists, punch items, PCOM, COM, dossier, dossiers, PTW, Permit to work, Permit-to-work, FEED, EPC, EPC contractor, LNG, LNG plant, modularized equipment, modularized plant, liquified natural gas, YAMAL LNG, Chiyoda, JGC, SLD, single line diagrams, single lines diagrammes, Mark up, mark-up, handover, hand over, CCTV, PDCS, SEPAM, 40, 80, 100, Onshore, preparation, Endress Hauser, GTG, Gas turbines, completion, RFC, RFSU, TOMC, offshore, calibration. English fluent, automation, controls, Dietsmann, Middle East, Africa, Yards, detectors, rotational basis, Commissioning site leader, Commissioning Team Leader, Instrument Leader, I&C Leader, Manager, Superintendent, Passport, Certificate, Verification, D&ID, D & ID, flow chart, flowcharts, flowchart, gross air leak tests, continuity, Yamal LNG, Client, Boiler, Boilers, Wells, Well pad, Xmas tree, iFAT, FAT, SAT, Site Acceptance tests, Factory Acceptance tests, Functional tests, loop tests, loop checks, OPERCOM, GS-EXP, General Specifications, Logic, Logic Sequences, Sequence tests, megger tests, bus tie, bus bars, PRODOM, EDMS, BOSIET, HUET, petrochemical, electrical, Australia, Canada, CA EBS, EBS, CA-EBS, OPITO, offshore



Contact this candidate