Redentor O. Manalo

Objective: To introduce my ability to supervise according to my knowledge and experiences in quality control and quality assurance, QMS ISO 9001, manufacturing, inspection, production and inspection of plastic, metal parts and assembly of various household and industrial appliances.

Summary of Qualifications:

22 years working experience as quality control and quality assurance in varied manufacturing industries ( Plastic Forming, Metal Forming, Electrical Home Appliances) encompassing testing and inspection of all kinds of various parts and materials for assembly.

Knowledgeable in plastic injection processing, assembly and inspection of all household & industrial Electric Fans as well as small kitchen home appliances.

Very knowledgeable and skilled in using various kinds of inspection and measuring tools and equipment

Knowledgeable in the maintenance and control of records and documents that relate to the company’s Quality Management System

Appoint as Quality Management Representative

Knowledgeable and responsible in the effective implementation of the Quality Management System of the company

Acts as internal auditor and Quality Management Representative

Very strong interpersonal skills with leadership.

Skilled at interacting and established good working relationship with customers / clients.

With strong decision making.

Self-motivated, initiative, maintains a high level of energy.

Safeguard / protects the company’s image.

Experiences:

SEPTEMBER 28, 2015 – PRESENT MANUFACTURING PLANT

SHIN HEUNG ELECTRO DIGITAL INC. Lot 5 Block 3 Brgy. Batino,

Manufacturing of Pressed / Stamped Calamba City of Laguna

Metal Parts & Injected Plastic Parts

Main Customers are :

EPSON ; FUNAI ; IMI ; PANASONIC ; BROTHER

( MANUFACTURING OF PRINTER AND PROJECTOR)

QA-QC Supervisor

Direct control of QC inspectors and leaders.

Monitor outgoing inspection items, delivery schedule, inspection result

and check if correct methods of inspection are being followed.

Coordinate to all concerned department with regards to the status /

result of inspected items and establish the scope of rework for rejected items.

Conduct meeting with inspectors and leaders regularly and discuss

all relevant matters with regards to overall improvement of product quality.

Monitor and verify the effectiveness of the Corrective and Preventive

action written on the CPAR and its consistent implementation.

Conduct customer visit if there is quality complain that need to be verified

Responsible for the continuous research and development for the

purpose of better improvement in inspection and in system.

Responsible for monitoring all measurement instruments and its

calibration status and cycle.

Conduct weekly process audit to production department.

Daily reporting of Internal Quality Issues encountered by inspectors

and Customer Issues.

In-charge of making other pertinent reports and analysis and any other

duties that may be assigned by the Manager.

Acting QC Manager

Responsible to ensure the administration of the company’s quality,

process and/or business improvements efforts.

Reporting to general manager the result internal audit, customer audit

and quality summary report gathered from material incoming inspection,

in- process inspection, outgoing quality inspection/ customer outgoing

inspection and reliability test of current /new model and substitute material

Make production quality plan for every new customer, this to outline

incoming materials / product evaluation requirements and inspection requirements,

to designs or specifies inspection and testing mechanism and equipment.

Responsible for the review and approval on current model / new

model product performance evaluation, reliability test, in -process

inspection and outgoing inspection.

Planning and organizing internal /external safety and quality audits of

customer and 3rd party audit.

Conduct internal quality audit to verify the effectiveness on the

implementation of quality management system and customer standards

Coordinates with other departments with regards to the problems

and other matters beneficial to the improvements of company operations

Interface with customer, relating to all quality issues, quality activities

and quality requirement.

In-charge of making other pertinent reports and analysis and any other

duties that may be assigned by the Senior Manager.

Ensure that the IMS requirements are established, implemented and maintained in accordance with ISO 9001:2008 ; ISO 14001:2004 and OHSAS 18001:2007 Standards

CUSTOMERS WINDOW

Direct customer contact.

Coordinate to all concerned department with regards to the status of

any issues encountered externally and internally.

Generate report such as; CLCA - Close loop corrective actions report

( For any MARKET / CUSTOMER issues encountered ).

Conduct meeting with concerned department in case of customer

complain and discuss all relevant matter with regards to overall

continuous improvement of product quality.

Monitor and verify the effectiveness of the Corrective and Preventive

action written on the CLCA and its consistent implementation.

January 17, 2013 – Present

ASSEMPRO COMPANY MANUFACTURING PLANT

( Manufacturing of various branded home appliances ) 2265 Paliparan I, Road

i.e. : Standard, La Germania, 3D, Hanabishi, Dasmarinas, Cavite

Imarflex, Izola and Sweet Home

QA-QC Supervisor / Acting Production Supervisor

June 06, 2001 – January 15, 2013

3C DISTRIBUTORS INTERNATIONAL, INC.

NIKON HOME APPLIANCES

QA SUPERVISOR / Product Development (R & D) Technical Assistance

Primarily responsible for the testing and evaluation of materials, parts, and finished products to ensure that these conform to the standards and specifications. Responsible also for supervising the quality control activities at plant head, strengthening inspection capability, analyzing inspection results, and testing/ measuring reliability. In charge to compliance and adherence to those quality policies. Coordinating with the R & D with regard to the specifications of the product designs. Maintaining PS and ICC Mark and other certifications applicable from the industry.

DUTIES AND RESPONSIBILITIES

Ensures adherence to product quality assurance.

Responsible to the compliance of each product to Bureau of Product Standard (BPS) and

Department of Trade and Industry (DTI).

Preparing, conducting test and evaluation of each product prior to submission to BPS

Organize and delegates responsibility to subordinates according to the needs of the company.

Conduct test and evaluation of raw materials as well finished goods prior to acceptance.

Analyze and recommends solutions where required to all existing problem occurs to ensure improved performance and cost effectiveness.

Performs electrical and mechanical tests to identify potential quality or reliability problems

Determines exposure to problems, or potential problems by analyzing data (lot number, quantity, shipment date, etc.) on product shipped, assembled, and warehouse after problem was detected.

Analyzes immediately the product returns/defective items and identifies the source of the problem. Simulates the problem, defines the quality issue, and recommends corrective action.

Supervises technical staff in carrying out tests and checks, often in a laboratory environment.

Acts as key contact with the customers' auditors; ensures execution of corrective actions and on-going compliance with customers' specifications.

Monitors day-to-day activities and output of her subordinates and ensures that targets are met.

Coordinates with other related division regarding issues concerning the quality of materials and products.

Practices 5S in the workplace.

Meets with her subordinates to identify and resolve problems; assigns work activities, projects, and programs; monitors workflows, systems, and procedures.

Trains, motivates and evaluates assigned personnel. Provides and coordinates staff training.

1999 - 2001

TAI-LIEN PLASTIC LTD.

INJECTION MACHINE OPERATION (OFW)

Handles responsibly the assigned machine

Trimmer of parts injected by the machine.

Responsible for the proper mixing of materials.

Loading and unloading of raw materials and finished goods to container van.

Check machine setting to ensure its conformance to standard parameters as stated in the Manual

Responsible for proper use of instruments and test equipment and reports defective machinery when necessary.

1997–1999

Universal Mould Design Corp.

Plastic Injection

QUALITY CONTROL / MC Operator

Conducting I.Q.C. / I.P.Q.C. / & O.Q.C whether it may be raw materials or finished product to ensure it has meet product specified standard and specifications.

Monitor production output and quality.

If in need take immediate action to all problems and troubles encountered.

Trimmer / Machine Operator

1994-1997

CAMEL APPLIANCES MFG. CORP. 69 Cabral St. Maysan Rd.

Valenzuela City

PRODUCTION WORKER

. Assembler of electrical home appliances such as electric fans, rice cooker, flat iron, blender electronics / electric air pot, oven toaster gas stoves and the likes.

Motor Assembly Lead Man

. Responsible in directing the operators for product compliance to specifications and standards during the process of production. Also responsible for providing the necessary documentations needed for problems encountered during production.

Quality Control / Quality Assurance

. Responsible for checking product compliance to specifications and standards. Also responsible for providing the necessary documentations needed for problems encountered during inspection. Responsible for providing advices in solutions that will be applied to problems regarding quality policies and coordinating with production regarding the standard specification of the parts being processed and the results of the inspection.

Special Skills:

Computer literate:-Proficient in MICROSOFT WORD, MICROSOFT WINDOWS, POWERPOINT PRESENTATION, PUBLISHER, WINDOWS XP, Computer set-up

PHOTO EDITING using (U-LEAD)

Proficient in using various types of measuring devices and instruments e.g. multi-testers, micrometers, vernier caliper, all kinds of electrical measuring equipment etc.

TROUBLESHOOTS various defects of all kinds of electric fans and household and industrial appliances.

Educational Background

IDraft CAD – CAM Training Center

3rd Floor Banawe de Sta.Rosa Building

Sta. Rosa, Laguna

40 hrs. Training for Reliable CAD for 2D & 3D Design ( ZW-CAD )

April 21,2012 to May 19,2012

BS ELECTRONICS AND COMMUNICATION ENGINEERING

1994-1997

University of the East

Kalookan City

Secondary

1990-1994

Judge Juan Luna High School

Quezon City

Primary

1984-1990

Sapaan Elementary School

Atimonan Quezon

Personal:

Status : Married Languages : English, Filipino

Age : 39 Citizenship : Filipino

Birthdate : August 25, 1977 SSS : 33-1970306-6

Birthplace : Atimonan Quezon TIN : 173-757929

Religion : Born Again Christian

Character References:

Ma. Jeannie C. Mandap Mr. Rolando Hernandez

QA Manager QA-QC / TPM Manager

3C Distributor International Inc. Shin Heung Electro Digital Inc.

79 General Luis St. Ramitex Compound Lot 5 Block 3 CPIP, Brgy. Batino

Bagbaguin, Valenzuela City Calamba City, Laguna

CP # 0922 – 800 - 5750 CP # 0936 – 567 - 7857

I hereby certify that the above information is true and correct to the best of my knowledge and belief.

REDENTOR O. MANALO

Applicant

Contact this candidate