Raymond Owens

acv52a@r.postjobfree.com

909-***-****

Objective: To obtain a rewarding and challenging position that will capitalize on my electronic and mechanical knowledge while achieving continuous career advancement opportunities. Adept at using drill motors, rivet guns, band saws, wrenches, socket sets, screw drivers, calipers, micrometers, feeler gauges, torque wrenches and ball gauges. Proficiency at reading engineering drawings, maintenance manuals, to install and repair aircraft units, Federal Aviation Administration, Airframe and Power-plant licensed mechanic. I am proficient in using the Microsoft Word, Excel and Access programs. Experience:

Feb15 - Apr 15 STS Victorville, CA

Aircraft Structure Mechanic

I worked from task cards, blueprints, maintenance manuals and sheet metal repair manuals fabricating, replacing and installing aircraft parts. I changed aircraft brakes and tires. Removed, ordered and replaced parts that were corroded, worn out or out of limits IAW the applicable documents. May 14 - Jul14 Key Skilled Personnel Victorville, CA Aircraft Structure Mechanic

I performed tear-downs on MD-11’s removing access panels, hydraulic lines, floor panels, wire harnesses, fuel pumps, air conditioning ducts, actuators, electrical components, fairings lavatory plumbing, ram air ducts, antennas, beacon lights and motors.

Dec 12 - Apr 13 Vought Hawthorne, CA

Apprentice Composite Technician Trainee

I performed trimming and finishing of composite and composite metallic assemblies, assembly of structures including setup, bonding and fastener applications, used solvents to prepare surfaces for sealing or assembly, preparation of parts for bagging, including placement of bleeders, thermocouples, probes and vacuum connections. Check seals on completed bagged parts for leaks, vacuum bag processing, bonding, and oven/autoclave curing. Make basic layouts on parts or assemblies in order to establish reference points and to check dimensions using calipers, micrometers, precision scales and torque wrenches, work from engineering drawings as well as both written and verbal instructions and worked with engineers to develop composite hardware fabrication and assembly processes/tooling. Apr 12 – Jul 12 Regent Aerospace Valencia, CA

. Quality Control Inspector

I worked as a QC inspector inspecting commercial aircraft seat assemblies and parts made at are facility. When the components arrived I wrote up an inspection receiving report documenting all discrepancies and unserviceable parts to be repaired and/or replaced. After the components were repaired I did an in-process inspection to insure that the repairs were done IAW the C M.M, engineering drawings, work orders, and all other required documents. Before the components were shipped out I did a final inspection to ensure that the components were satisfactory to the customers, I then generated a form 8130-3 returning the components back to service. Jul 10 - Dec 10 Vought Hawthorne, CA

Sheet Metal Mechanic

I worked at Vought Aerostructures as a sheet metal mechanic on the 747-8 skin panel which consisted of drilling, countersinking, riveting, Installation of fasteners and sealing operations. I worked from blueprints, engineering drawings and work orders.

Sep 06- Feb 09 L-3 Vertex Oklahoma City, OK

Field Service Representative

As a Counter Remote Control Improvised Explosive Device (RCIED) Electronic Warfare CREW/Warlock, Field Service Representative, FSR I performed installs, de-installs, repairs and relocations of Warlock systems. I performed troubleshooting with various types of spectrum analyzers, attenuators, digital multi meters, ruggedized laptop computers and Personal Digital Assistants, PDAs.

I conducted routine maintenance on unit’s Warlock systems. Downloaded event logs from Warlock systems for distribution to higher command for evaluation of system performance and generation of new threat loads. I replaced battle damaged and non-functioning Warlock equipment. I traveled to various locations throughout Iraq and Kuwait performing fielding installations of and upgrades to systems, on various types of US military’s tactical vehicles and other US government agencies’ non-tactical vehicles. I worked with the Red, Green, ICE/M-ICE, MMBJ, Duke V1, V2, V3, Jukebox and CVRJ systems. Performed as sole FSR at two remote Forward Operating Bases, FOB’s ensuring the safety of the military units by performing system operational checks and verifying that the firmware and threat loads were current and functioning correctly. I worked along with the CREW Technical Officer CTO and trained Electronic Warfare Officers, EWO’s and soldiers on the proper operation and connection of the various system components of the Warlock systems. Logistical duties included shipping and receiving, transferring equipment via hand receipt to Theater Provided Equipment, TPE office and ensuring proper accountability and timely availability of systems to the customer. Jun 06 - Sep 06 L-3 Vertex Oklahoma City, OK

Aircraft Structural Mechanic

I performed pre-flight and post flight inspections of the low observable coatings and preformed structural repairs, fabrication of parts and modifications to the F-22 Raptor at Nellis AFB, Las Vegas, NV. Jan 06 - Jun 06 Airplanes Inc. Jensen Beach, FL

. Sheet Metal Mechanic

I performed maintenance, repaired or fabricated defective sections or parts using metal fabricating machines, saws, brakes, and grinders. Examined damaged parts or structures to determine repair or fabrication procedures and sequence of operation IAW FAA approved data. I worked on B727, B737, B747, B757, B767, B777, Airbus A320, and DC 10 at Mobile Aerospace.

Apr 04 - Jan 06 Lockheed Martin Marietta, GA

Structural Mechanic

I worked on the cockpit section of the US Air Force F-22 raptor, which consisted of lowering it into a jig, locating the drill templates and using composite drills and countersinks to process the fasteners holes. I also located and drilled out clips, gussets and brackets per the engineering drawings. I also worked on the build-up of engine inlet sections, which consisted of using drill templates to locate and drill out fastener holes, countersinking and installing fasteners such as Hi-Loks, Eddie-bolts etc. I worked on the US Air Force, C-5 modification program removing and replacing worn parts such as clips and brackets etc., to help and return it back to service.

Nov 03 - Feb 04 Hitco Carbon Composite Gardena, CA Composite Structural Assembler

I preformed drilling, routing, countersinking, bonding, assembly, fabrication. I worked from blueprints and work orders using lean manufacturing principles in building composite subassemblies.

Apr 03 - Oct 03 Sargent Fletcher Inc. El Monte, CA Product Support Technician

I evaluated, modified, repaired or overhauled hydraulic and electrical equipment on fuel tanks and in-flight refueling systems. Applied knowledge of principles in determining equipment malfunctions and applied skills in restoring equipment to operation.

Aug 02 – Jan 03 Boeing Satellite Systems El Segundo, CA

. Heat Pipe Manufacturing Specialist

I laid-out, fabricated, modified, repaired and tested precision heat transfer devices used for spacecraft thermal control.

Sep 88 - Jan 01 Boeing Corporation Long Beach, CA

. Airframe Surface/Structural Mechanic

I laid-out, assembled, installed and reworked parts, assemblies and skin panels, including fabrication of pre-production, developmental parts, and electrical bonding. Determined methods and sequence of structural assembly, Installed, repaired, reworked and modified operations on pre-production, development parts. I worked from blueprints, engineering drawings, and production illustrations. Located, trimmed, and installed parts assemblies and skin panels where dimensions were critical and fitting were to exact tolerances.

Education: Westwood College of Aviation Technology Inglewood, CA References: Available upon request

Contact this candidate