Quality Manager

MR. DOLOR V. DIMAUNAHAN

*** ******, ******* ****, ******** 4232Philippines

Tel. No.:+6343-784- 5313

Mobile Number : +639*********/+639*********

Position Applied: QA/QC Manager

OBJECTIVE

Seek a fulfilling position that will allow me to fully contribute my knowledge and skills acquired through more than 25 years of solid work experience in business development.

CAREER SUMMARY

Over the past 25 years I have exposed in different fields of both electronic and manufacturing (metal fabrication, metal treatment, plastic injection automotive and electronics) set up and with developed skills in production operation, process engineering and quality assurance. I have acquired these special skills on my entire professional career from which I believe I’ve been expert with. Trained specifically in Quality System set up (ISO 9001, ISO/TS16949 and ISO 14001), relative to this I have acquired a certificate as qualified ISO assessor/Lead assesor Trained also in Design of Experiments, SPC application and Lean manufacturing in which I have applied in my companies that I’ve work with. Through these years problem solving and decision making have always been a part of my daily routines.

WORK EXPRIENCES

QA/QC Manager / PCO/Safety Officer

Middleby Philippines Corporation

113 Technology Avenue, Laguna Technopark, Binan Laguna

May 15, 2012 – Present

Job Description

Manages QAQC Department and makes sure that continuous quality-control is performed over materials and shop facilities.

Checks QC Personnel work from time to time.

Develops quality control programs; reviews and analyzes statistical data and specifications to indicate present fabrication standards and establish propose quality and reliability expectancy of finished or fabricated products.

Formulates and coordinates fabrication quality objectives with production procedures to obtain economic options reliability. Checks on status of inspection of projects ongoing at the plant.

Prepares QA/QC procedure as required by clients. Reviews client specifications prior to start of the project. May join client’s representative in inspection; oversees mechanical testing as per process requirements. May investigate and adjust customer complaints regarding quality.

Observes and complies with existing company policies, codes, agreements; rules and regulations.

Assumes responsibility for the proper housekeeping and cleaning of work areas observes and practices safety rules and regulations. Undertakes housekeeping and cleaning chores in and out of work areas; observes and practices safety rules and regulations.

Establish and maintain Quality System procedures of the company

Processing of ECC Certificate for DENR, quarterly and semi annually and safety aspects of company

QA/QC Manager/QMR

Enkei Philippines Incorporate

Aluminum Wheels Manufacturing

104 Industry Drive, Carmelray 1, Calamba City Laguna

August 2, 2010 – May 4, 2012

Job Description

As QA/QC Manager:

Plan, control and monitor year round QA/QC program activities and key results area;

Assure customer that all products has passed the approved quality standards of the company;

Review and recommend corrective action submitted by Supervisor;

Coordinates with the clients for their pre and post delivery problems;

Review and check the results of destructive testing;

Hold shipment delivery of finished products found to be short in the compliance of the quality standards;

Performs analysis of the product based on the internal and external problems;

Oversee and ensure calibration of measuring tools.

Oversee work performance QA/QC Supervisors/staff

As Quality Management Representative (QMR):

Ensure the promotion of awareness of customer requirements throughout the company;

Establish and maintain a formal quality system in compliance with ISO/TS 16949 requirements;

within 5 working days

Do monthly review on Management Review Committee objectives;

Maintains the company’s quality manual

Directly responsible in the monitoring of Internal Quality Audit functions(IQA)

Maintains ISO/TS 16949 activities and necessary communications such as:

a.Report significant changes in quality system

b.Monitors and reports customer problems as described in ISO/TS 16949 requirements

c.Schedule surveillance audits in compliance with the registrar requirements

d.Response to reported deviations as result of the surveillance audit

Technical- Production Manager/QMR

Yumex Printed Circuit Corporation (YPCC)

Carmelray 1, Canlubang Calamba City, Laguna

July 6, 2004-July 15, 2010

Job Description

Design and develop improvement methods for PCB operations both Rigid and flexible PCB’s

Prepares the over all schedule of the team base on the overall schedule of

the production department

Leads the team in delivering the the products correctly and at the right schedule.

Conduct technical trainings i.e. Product Knowledge, Safety and Health Hazards Training and ISO 9001:2000 training

Develop and improve working methods and procedures to gain productivity.

Implementation of standards that has been installed to enhance the production output..

Involve in technical aspects of production as well as optimization of production line

Reports the overall accomplishment of the group with regards to the project being handled

Manage waste water treatment operation

Performs administrative functions

Accomplishments

Formulate training program (Product Knowledge Training) for operators and technician to further enhance their skills

Addressed the problem on flux treatment and able to define the required controls of the said line in able to maintain good product quality.

Increase productivity from the first quarter of 2007 and able to meet sales target of the same period.

Increase the usual 86 % average yield to 98.5 % average yield for the months

Sr. QA Supervisor / Deputy QMR

GNF (Philippines) Inc.

117 East Science Ave. Laguna Technopark, Binan, Laguna

September 7, 1997- July 3, 2003

Job Description

Establish and maintain Quality System procedures for in-process and final product inspection and testing;

Ensure adequacy, effectiveness and reliability of inspection procedures;

Notify production on deviations to process parameters or customer requirements

Conduct Review and define customer requirements following contract review

and quality planning procedures;

Coordinate activities in handling customer complaints;

Initiate (issue CPAR), formulate, implement and verify corrective and preventive actions to minimize nonconformity (product, processes or system)

Provide SEM and EDS services to assist quality related problem solving activities

Establish procedure related to quality system;

Review QA records to ensure accuracy and completeness of information;

Maintain and safe keep inspection and test results for future reference;

Analyze records of inspection and test results and procedures;

Conduct internal and external quality audit and report findings and follow up corrective actions and verifies effectiveness of corrective actions.

Provide SEM and EDS services to assist quality related problem solving activities;

.

Accomplishments

One of the pioneer in the company from which I have been part of the company’s start up for Quality assurance and Control Department, which resulted to the following :

a.Achievement of company’s ISO Certification

b.Handling 100 % of company’s customer sample evaluation both overseas and local customers.

c.Implementation of TPM

d.Set – up of company’s Automated Optical Inspection

Sr. Production Engineer / QMR

Price -JohnsonControls (S) Pte. Ltd., 19 Gul Crescent, Singapore

October 1994 to July 1997

Job Description

To set direction for improving Production Department’s performance in line with the management’s objectives and policies;

Issues product conformity reports to customers;

To liase with customers, vendors and in house personnel on quality issues;

To implement improvement measures and ensure that measures applied are effective to prevent reoccurrence of quality problems;

Update the management on productivity status, daily production target and each sections activities;

Implement cost cutting measures in raw materials, manpower planning and machineries utilization;

Established technical training to production staff and specialist to enhance their productivity and knowledge;

Ensure company’s quality system are followed and properly implemented;

Accomplishments

Re-Certify company’s Quality System for ISO 9000: 1994

Certified Assessor and Lead assessor by British Standard International (BSI)

Raised company’s product quality yield from the usual 90 % yield to a high of 99 % yield.

Sr. Process Engineer

Epic Electronics Ind. Inc., Tanyag, Taguig M. Mla. Phils.

April 1994 to September 1994

Job Description

Supervision of all process engineering on four major production areas of PCB

Manufacturing i.e. Dry processing, wet processing, forming and PCB

assembly.

Supervision of all incoming materials inspection, laminates and plating

chemicals and qualification based on process specifications;

Supervision of all evaluations done for process improvement

Implementation of all standard operating procedures;

Accomplishments

Transfer new technology of liquid photo imageable solder mask, a new

Technology in PCB printing to improve quality and productivity.

Pioneer in the company’s operation from which I have been part of company’s

success.

Plating Process Engineer

Epic Electronics Ind. Inc., Tanyag,Taguig M. Mla. Phils

January 1989 to March 1994

Job Description

Line trouble shooting in three major production areas of PCB manufacturing

i.e. Preparation area, wet area and finishing area;

Setting specifications and standards;

Production line troubleshooting

Production evaluation on sample products to be qualified by customers;

Laboratory inspection and testing

Inspection of parts subjected for engineering disposition;

Accomplishments

Able to set up product specification and SET UP production’s process control after a year of company’s set up.

Able to trained more than 30 operators at production which were eventually became company’s key personnel on special processes like Copper, Nickel, Sn-PB and Gold (both electroless and electrolytic).

TRAININGS AND SEMINARS

ISO 9001:2015 Awareness Seminar DQS-UL, Philippines

and Internal Auditor Training May 25 – 27, 2016

Internal Quality Auditor Course for TUV Rheinland Philippines

TS 16949: 2009 March 15-18. 2012

Six Sigma Quality Kaizen Management Services

ADB Building

Ortigas, Pasig City

ISO 9001:2008 TUV Nord

QMS Requirements Artnature Mnfg Phils. Inc

FPIP, Sto Tomas, Batangas

Introduction to ISO 9001:2000 Neville Clark (Phils.) Inc

QMS Requirements Edsa, Shangrila Hotel

Mandaluyong City

Revision 2000 of ISO 9001 TUV Rheinland Phils., Ltd

Introductory Course Madrigal Business Park

Alabang Muntinlupa City

Supervisory Management Course GNF Philippines Inc.

Binan, Laguna

X-Ray Micro Analysis for the PHILAB Industries Inc.

Semiconductor Industry and Traders Hotel, Mnla

Applications

Seminar on Scanning Electron PHILAB Industries Inc

For the Semiconductor Industry Traders Hotel, Mnla

Statistical Process Control Course Novo Quality Services

PSB Building, Singapore

QC techniques for Quality Improvement Novo Quality Services

PSB Building, Singapore

Calibration Control System Luke Philipps Consultant

Peninsula Hotel,Singapore

Certified Assesor / British Standard Int’l

Lead Assesor For Peninsula Hotel Singappore

Quality System

EDUCATIONAL BACKGROUND

Bachelor of Science in Chemical Engineering

Feati University, Manila

Top 10 % of the graduating class

1983 to 1989

AFFILIATION

CHESA (Feati) Chemical Engineering Student Association, Batch 1989

President, 1989

PERSONAL DATA

Birthdate : April 6, 1965

Civil Status : Separated

SSS No.: 039*******

I do hereby solemnly swear that the above information contained herein are true and correct to the best of my knowledge and belief.

Mr. Dolor V. Dimaunahan

Contact this candidate